As part of this, we import bpf_filter.c from NetBSD. Even though that
file is part of the NetBSD kernel, it is also used by userland (as is
clear here). Our LWIP service has its own bpf_filter.c implementation
but that implementation has certain limits (e.g. on program size) that
are fine for a system service but should not apply to userland.
The libpcap code has a number of blocks guarded by __NetBSD__, but
none of those blocks apply to MINIX 3. In particular, some of the
alignment logic used for NetBSD may in fact not work in our case.
Change-Id: Ib187e22d627c929e111d5d4a991c3bee3c0154cb
Also known as ISC bind. This import adds utilities such as host(1),
dig(1), and nslookup(1), as well as many other tools and libraries.
Change-Id: I035ca46e64f1965d57019e773f4ff0ef035e4aa3
This needs to be done before retiring inet itself, since these
utilities include headers from inet directly.
Also retire the now-obsolete paramvalue(3).
Change-Id: I9b27771190a6a32ee533b0c0d9d37f61a16ee36c
This new implementation of the UDS service is built on top of the
libsockevent library. It thereby inherits all the advantages that
libsockevent brings. However, the fundamental restructuring
required for that change also paved the way for resolution of a
number of other important open issues with the old UDS code. Most
importantly, the rewrite brings the behavior of the service much
closer to POSIX compliance and NetBSD compatibility. These are the
most important changes:
- due to the use of libsockevent, UDS now supports multiple suspending
calls per socket and a large number of standard socket flags and
options;
- socket address matching is now based on <device,inode> lookups
instead of canonized path names, and socket addresses are no longer
altered either due to canonization or at connect time;
- the socket state machine is now well defined, most importantly
resolving the erroneous reset-on-EOF semantics of the old UDS, but
also allowing socket reuse;
- sockets are now connected before being accepted instead of being
held in connecting state, unless the LOCAL_CONNWAIT option is set
on either the connecting or the listening socket;
- connect(2) on datagram sockets is now supported (needed by syslog),
and proper datagram socket disconnect notification is provided;
- the receive queue now supports segmentation, associating ancillary
data (in-flight file descriptors and credentials) with each segment
instead of being kept fully separately; this is a POSIX requirement
(and needed by tmux);
- as part of the segmentation support, the receive queue can now hold
as many packets as can fit, instead of one;
- in addition to the flags supported by libsockevent, the MSG_PEEK,
MSG_WAITALL, MSG_CMSG_CLOEXEC, MSG_TRUNC, and MSG_CTRUNC send and
receive flags are now supported;
- the SO_PASSCRED and SO_PEERCRED socket options are replaced by
LOCAL_CREDS and LOCAL_PEEREID respectively, now following NetBSD
semantics and allowing use of NetBSD libc's getpeereid(3);
- memory usage is reduced by about 250 KB due to centralized in-flight
file descriptor tracking, with a limit of OPEN_MAX total rather than
of OPEN_MAX per socket;
- memory usage is reduced by another ~50 KB due to removal of state
redundancy, despite the fact that socket path names may now be up to
253 bytes rather than the previous 104 bytes;
- compared to the old UDS, there is now very little direct indexing on
the static array of sockets, thus allowing dynamic allocation of
sockets more easily in the future;
- the UDS service now has RMIB support for the net.local sysctl tree,
implementing preliminary support for NetBSD netstat(1).
Change-Id: I4a9b6fe4aaeef0edf2547eee894e6c14403fcb32
This library provides an event-based abstraction model and dispatching
facility for socket drivers. Its main goal is to eliminate any and
all need for socket drivers to keep track of pending socket calls.
Additionally, this library takes over responsibility of a number of
other tasks that would otherwise be duplicated between socket drivers,
but in such a way that individual socket drivers retain a large degree
of freedom in terms of API behavior. The library's main features are:
- suspension, resumption, and cancellation of socket calls;
- an abstraction layer for select(2);
- state tracking of shutdown(2);
- pending (asynchronous) errors and the SO_ERROR socket option;
- listening-socket tracking and the SO_ACCEPTCONN socket option;
- generation of SIGPIPE signals; SO_NOSIGPIPE, MSG_NOSIGNAL;
- send and receive low-watermark tracking, SO_SNDLOWAT, SO_RCVLOWAT;
- send and receive timeout support and SO_SNDTIMEO, SO_RCVTIMEO;
- an abstraction layer for the SO_LINGER socket option;
- tracking of various on/off socket options as well as SO_TYPE;
- a range of pre-checks on socket calls that are required POSIX.
In order to track per-socket state, the library manages an opaque
"sock" object for each socket. The allocation of such objects is left
entirely to the socket driver. Each sock object has an associated
callback table for calls from libsockevent to the socket driver. The
socket driver can raise events on the sock object in order to flag
that any previously suspended operations of a particular type should
be resumed. The library may defer processing such raised events if
immediate processing could interfere with internal consistency.
The sockevent library is layered on top of libsockdriver, and should
be used by all socket driver implementations if at all possible.
Change-Id: I3eb2c80602a63ef13035f646473360293607ab76
This library provides abstractions for socket drivers, and should be
used as the basis for all socket driver implementations. It provides
the following functionality:
- a function call table abstraction, hiding the details of the
socket driver protocol with simple parameters and presenting the
socket driver with callback functions very similar to the BSD
socket API calls made from userland;
- abstracting data structures and helper functions for suspending
and resuming blocking calls;
- abstracting data structures and helper functions for copying data
from and to the caller.
Overall, the library is similar to lib{block,char,fs,input,net}driver
in concept. Some of the abstractions provided here should in fact be
applied to libchardriver as well. As always, for the case that the
provided message loop is too restrictive, a set of more low-level
message processing functions is provided.
Change-Id: I79ec215f5e195c3b0197e223636f987d3755fb13
This reverts commit 22ad44d6a9.
With the MIB service implemented, this hack is no longer necessary.
Change-Id: Ic969c2dcecd6fc9ce283d1dda6518796869875e3
Some functions in lib/libc/net were disabled on MINIX3 only, but with
a few added header files they build just fine, even though some of
them rely on system functionality that has not yet been implemented.
Since the functionality is unlikely to be used in practice (because
it typically requires the use of protocol families that themselves are
not yet supported, such as IPv6), already enabling it right now helps
in building packages that rely on the functionality being present at
compile time, while not posing any practical risk of breaking the same
packages at run time.
Change-Id: Idee8e3963c9e300bde9575429f0e77b0565acaef
Adapt libc devname(3) to make use of it, so that such device name
queries are now several orders of magnitude faster. The database
is created and updated at system bootup time.
Change-Id: I0cbcb24c7d47577d4d6af9c8290c21ee4df9a0ff
Imported with no changes, but not all parts are expected to be
functional. The libc nlist functionality is enabled for the
purpose of successful linking, although the nlist functionaly has
not been tested on MINIX3 nor is it needed for how we use libkvm.
In terms of function calls: kvm_getproc2, kvm_getargv2,
kvm_getenvv2, and kvm_getlwps are expected to work, whereas
kvm_getproc, kvm_getargv, kvm_getenvv, and kvm_getfiles are not.
Change-Id: I7539209736f1771fc0b7db5e839d2df72f5ac615
The new MIB service implements the sysctl(2) system call which, as
we adopt more NetBSD code, is an increasingly important part of the
operating system API. The system call is implemented in the new
service rather than as part of an existing service, because it will
eventually call into many other services in order to gather data,
similar to ProcFS. Since the sysctl(2) functionality is used even
by init(8), the MIB service is added to the boot image.
MIB stands for Management Information Base, and the MIB service
should be seen as a knowledge base of management information.
The MIB service implementation of the sysctl(2) interface is fairly
complete; it incorporates support for both static and dynamic nodes
and imitates many NetBSD-specific quirks expected by userland. The
patch also adds trace(1) support for the new system call, and adds
a new test, test87, which tests the fundamental operation of the
MIB service rather thoroughly.
Change-Id: I4766b410b25e94e9cd4affb72244112c2910ff67
The magic runtime library is now built as part of the regular build, if
the MKMAGIC=yes flag is passed to the build system. The library has
been renamed from "magic" to "magicrt" to resolve a name clash with BSD
file(1)'s libmagic. All its level-5 LLVM warnings have been resolved.
The final library, "libmagicrt.bcc", is now stored in the destination
library directory rather than in the source tree.
Change-Id: Iebd4b93a2cafbb59f95d938ad1edb8b4f6e729f6
This brings our tree to NetBSD 7.0, as found on -current on the
10-10-2015.
This updates:
- LLVM to 3.6.1
- GCC to GCC 5.1
- Replace minix/commands/zdump with usr.bin/zdump
- external/bsd/libelf has moved to /external/bsd/elftoolchain/
- Import ctwm
- Drop sprintf from libminc
Change-Id: I149836ac18e9326be9353958bab9b266efb056f0
The NetBSD libc malloc implementation performs its own out-of-memory
check, presumably for performance reasons. The check makes a strong
assumption about the address space layout, which is that memory-
mapped pages are always located above the heap. However, this
assumption does not necessarily hold on MINIX3, thus resulting in
malloc reporting an out-of-memory condition without the system
actually being out of memory at all. Evidence suggests that in
particular dynamically linked (i.e., pkgsrc) binaries were affected
by this issue - most notably git.
Change-Id: If542fbace0a1cce12aa9e075d51992cbbbf26e94
This patch adds support for the wait4 system call, and with that the
wait3 call as well. The implementation is absolutely minimal: only
user and system times of the exited child are returned (with all other
rusage fields left zero), and there is no support for tracers. Still,
this should cover the main use cases of wait4.
Change-Id: I7a04589a8423a23990ab39aa38e85d535556743a
- move MINIX3-specific files into minix/lib/libpuffs;
- resynchronize the remaining files with NetBSD code;
- remove a few unnecessary changes;
- put remaining MINIX3-specific changes in __minix blocks;
- sort out the source files being linked at all.
The result is that libpuffs now successfully links against FUSE
file system programs again. It can successfully mount, perform
some of the most basic operations, and unmount the file system.
Change-Id: Ieac220f7ad8c4d1fa293abda81967e8045be0bb4
