diff --git a/Boot init.lua/mini/README.md b/Boot init.lua/mini/README.md
new file mode 100644
index 0000000..57d824b
--- /dev/null
+++ b/Boot init.lua/mini/README.md	
@@ -0,0 +1,11 @@
+# Version minimaliste d'un init.lua
+
+Test au moment du boot qui a été la cause de boot et alors prend une décision en conséquence.
+
+Si le boot a été causé par un power on, alors attend 10 secondes avant de démarrer le fichier boot.lua. Cela permet d'avoir le temps de prendre une action en cas de plantage en boucle.
+
+Dans les autres cas, démarre sans autre le fichier boot.lua pour autant qu'il existe.
+
+
+zf181118.2231
+
diff --git a/Boot init.lua/mini/boot.lua b/Boot init.lua/mini/boot.lua
new file mode 100644
index 0000000..83730db
--- /dev/null
+++ b/Boot init.lua/mini/boot.lua	
@@ -0,0 +1,11 @@
+-- Scripts à charger après le boot pour démarrer son appli
+
+print("\n boot.lua zf181118.2329 \n")
+
+if file.exists("wifi_ap_stop.lua") then dofile("wifi_ap_stop.lua") end
+if file.exists("dsleep.lua") then dofile("dsleep.lua") end
+
+jobtimer1=tmr.create()
+tmr.alarm(jobtimer1, 1*1000,  tmr.ALARM_AUTO, function()
+    print("coucou...")
+end)
diff --git a/Boot init.lua/mini/dsleep.lua b/Boot init.lua/mini/dsleep.lua
new file mode 100644
index 0000000..ab364f7
--- /dev/null
+++ b/Boot init.lua/mini/dsleep.lua	
@@ -0,0 +1,11 @@
+-- Teste le deep sleep !
+-- après x seconde, s'endore pendant y secondes
+-- ATTENTION: il faut connecter, avec une résistance de 1k, la pin 0 à la pin RESET !
+
+print("\n dsleep.lua   zf181119.0022   \n")
+
+ztmr_SLEEP = tmr.create()
+tmr.alarm(ztmr_SLEEP, 2*1000, tmr.ALARM_SINGLE, function ()
+    print("Je dors...")
+    node.dsleep(15*1000*1000)
+end)
diff --git a/Boot init.lua/mini/initz.lua b/Boot init.lua/mini/initz.lua
new file mode 100644
index 0000000..5fa54c8
--- /dev/null
+++ b/Boot init.lua/mini/initz.lua	
@@ -0,0 +1,18 @@
+--Script de bootstrap, test au moment du boot qui a été la cause de boot.
+-- Si la cause est un power on ou une connexion depuis l'IDE, alors
+-- le script repair.lua pendant 30 secondes avant de continuer
+
+print("\n init.lua zf181119.0024 \n")
+
+_, reset_reason = node.bootreason()
+print("reset_reason:",reset_reason)
+if reset_reason == 0 or reset_reason == 6 then
+    print("seconde chance...")
+    if file.exists("repair.lua") then dofile("repair.lua") end
+    initalarme=tmr.create()
+    tmr.alarm(initalarme, 30*1000,  tmr.ALARM_SINGLE, function()
+        if file.exists("boot.lua") then dofile("boot.lua") end
+    end)
+else
+        if file.exists("boot.lua") then dofile("boot.lua") end
+end
diff --git a/Boot init.lua/mini/repair.lua b/Boot init.lua/mini/repair.lua
new file mode 100644
index 0000000..b727ccf
--- /dev/null
+++ b/Boot init.lua/mini/repair.lua	
@@ -0,0 +1,11 @@
+-- Scripts de seconde chance pour réparer une boucle dans le restart
+
+print("\n repair.lua zf181119.006 \n")
+
+if file.exists("wifi_ap_start.lua") then dofile("wifi_ap_start.lua") end
+if file.exists("telnet_srv.lua") then dofile("telnet_srv.lua") end
+
+jobtimer1=tmr.create()
+tmr.alarm(jobtimer1, 5*1000,  tmr.ALARM_AUTO, function()
+    print("repair...")
+end)
diff --git a/Boot init.lua/mini/rm_files.lua b/Boot init.lua/mini/rm_files.lua
new file mode 100644
index 0000000..81241cb
--- /dev/null
+++ b/Boot init.lua/mini/rm_files.lua	
@@ -0,0 +1,12 @@
+-- pour effacer TOUS les fichiers qui se trouve dans la flash du NodeMCU
+
+print("\n rm_files.lua zf180907.1511 \n")
+
+
+l=file.list() i=0
+for k,v in pairs(l) do
+    i=i+v
+    file.remove(k)
+end
+print("-------------------------------")
+print("\nC'est tout effaced :-) \n")
diff --git a/Boot init.lua/mini/telnet_srv.lua b/Boot init.lua/mini/telnet_srv.lua
new file mode 100644
index 0000000..e817d66
--- /dev/null
+++ b/Boot init.lua/mini/telnet_srv.lua	
@@ -0,0 +1,43 @@
+-- a simple telnet server
+print("\ntelnet_srv.lua   zf181119.0005   \n")
+
+-- restart server if needed
+if telnet_srv ~= nil then
+    telnet_srv:close()
+end
+telnet_srv = net.createServer(net.TCP, 180)
+
+telnet_srv:listen(23, function(socket)
+    local fifo = {}
+    local fifo_drained = true
+
+    local function sender(c)
+        if #fifo > 0 then
+            c:send(table.remove(fifo, 1))
+        else
+            fifo_drained = true
+        end
+    end
+
+    local function s_output(str)
+        table.insert(fifo, str)
+        if socket ~= nil and fifo_drained then
+            fifo_drained = false
+            sender(socket)
+        end
+    end
+
+    node.output(s_output, 0)   -- re-direct output to function s_ouput.
+
+    socket:on("receive", function(c, l)
+        node.input(l)           -- works like pcall(loadstring(l)) but support multiple separate line
+    end)
+    socket:on("disconnection", function(c)
+        node.output(nil)        -- un-regist the redirect output function, output goes to serial
+    end)
+    socket:on("sent", sender)
+
+    print("Welcome to NodeMCU world.")
+end)
+
+print("Telnet server running...\nUsage: telnet -rN ip\n")
diff --git a/Boot init.lua/mini/test_file.lua b/Boot init.lua/mini/test_file.lua
new file mode 100644
index 0000000..9053170
--- /dev/null
+++ b/Boot init.lua/mini/test_file.lua	
@@ -0,0 +1,4 @@
+--test si un fichier existe
+--zf181118.2237
+
+if file.exists("boot.lua") then dofile("boot.lua") end
diff --git a/Boot init.lua/mini/wifi_ap_start.lua b/Boot init.lua/mini/wifi_ap_start.lua
new file mode 100644
index 0000000..5934835
--- /dev/null
+++ b/Boot init.lua/mini/wifi_ap_start.lua	
@@ -0,0 +1,14 @@
+-- Démarre le WIFI en mode AP
+
+print("\n wifi_ap_start.lua   zf181118.2331   \n")
+
+local zmodewifi=wifi.getmode()
+if zmodewifi == wifi.NULLMODE then
+    print("WIFI mode AP only")
+    wifi.setmode(wifi.SOFTAP)
+elseif zmodewifi == wifi.STATION then
+    print("WIFI mode AP+CLI")
+    wifi.setmode(wifi.STATIONAP)
+end
+wifi.ap.config({ ssid = "NodeMCU "..wifi.ap.getmac(), pwd = "12345678" })
+if file.exists("wifi_info.lua") then dofile("wifi_info.lua") end
diff --git a/Boot init.lua/mini/wifi_ap_stop.lua b/Boot init.lua/mini/wifi_ap_stop.lua
new file mode 100644
index 0000000..2738627
--- /dev/null
+++ b/Boot init.lua/mini/wifi_ap_stop.lua	
@@ -0,0 +1,10 @@
+-- Démarre le WIFI en mode AP
+print("\n wifi_ap_stop.lua   zf180824.2000   \n")
+
+local zmodewifi=wifi.getmode()
+if zmodewifi == wifi.SOFTAP then
+    wifi.setmode(wifi.NULLMODE)
+elseif zmodewifi == wifi.STATIONAP then
+    wifi.setmode(wifi.STATION)
+end
+print("WIFI AP arrêté")
diff --git a/Boot init.lua/mini/wifi_info.lua b/Boot init.lua/mini/wifi_info.lua
new file mode 100644
index 0000000..5062fcf
--- /dev/null
+++ b/Boot init.lua/mini/wifi_info.lua	
@@ -0,0 +1,31 @@
+-- Petit script pour afficher les infos actuel du WIFI
+print("\n wifi_info.lua   zf181119.0014   \n")
+
+local zmodewifi=wifi.getmode()
+
+--wifi.NULLMODE, wifi.STATION, wifi.SOFTAP, wifi.STATIONAP
+
+if zmodewifi == wifi.NULLMODE then
+    print("WIFI OFF")
+elseif zmodewifi == wifi.STATION then
+    print("WIFI mode CLI")
+    print("Connected IP:\n",wifi.sta.getip())
+    do
+        local sta_config=wifi.sta.getconfig(true)
+        print(string.format("Current client config:\n\tssid:\"%s\"\tpassword:\"%s\"\n\tbssid:\"%s\"\tbssid_set:%s", sta_config.ssid, sta_config.pwd, sta_config.bssid, (sta_config.bssid_set and "true" or "false")))
+    end
+elseif zmodewifi == wifi.SOFTAP then
+    print("WIFI mode AP")
+    print("AP MAC:\n",wifi.ap.getmac())
+    print("AP IP:\n",wifi.ap.getip())
+    print("AP Connect:\n",wifi.ap.getconfig())
+elseif zmodewifi == wifi.STATIONAP then
+    print("WIFI mode CLI+AP")
+    print("Connected IP:\n",wifi.sta.getip())
+    do
+        local sta_config=wifi.sta.getconfig(true)
+        print(string.format("Current client config:\n\tssid:\"%s\"\tpassword:\"%s\"\n\tbssid:\"%s\"\tbssid_set:%s", sta_config.ssid, sta_config.pwd, sta_config.bssid, (sta_config.bssid_set and "true" or "false")))
+    end
+    print("AP MAC: "..wifi.ap.getmac())
+    print("AP IP: "..wifi.ap.getip())
+end
diff --git a/Bootstrap/init_minizf1.lua b/Boot init.lua/oldies/init_minizf1.lua
similarity index 100%
rename from Bootstrap/init_minizf1.lua
rename to Boot init.lua/oldies/init_minizf1.lua
diff --git a/Bootstrap/initz - copie 2.lua b/Boot init.lua/oldies/initz - copie 2.lua
similarity index 100%
rename from Bootstrap/initz - copie 2.lua
rename to Boot init.lua/oldies/initz - copie 2.lua
diff --git a/Bootstrap/initz - copie.lua b/Boot init.lua/oldies/initz - copie.lua
similarity index 100%
rename from Bootstrap/initz - copie.lua
rename to Boot init.lua/oldies/initz - copie.lua
diff --git a/Boot init.lua/initz.lua b/Boot init.lua/oldies/initz.lua
similarity index 100%
rename from Boot init.lua/initz.lua
rename to Boot init.lua/oldies/initz.lua
diff --git a/Boot init.lua/start - copie.lua b/Boot init.lua/oldies/start - copie.lua
similarity index 100%
rename from Boot init.lua/start - copie.lua
rename to Boot init.lua/oldies/start - copie.lua
diff --git a/Bootstrap/start.lua b/Boot init.lua/oldies/start.lua
similarity index 100%
rename from Bootstrap/start.lua
rename to Boot init.lua/oldies/start.lua
diff --git a/Boot init.lua/start_boot.lua b/Boot init.lua/oldies/start_boot.lua
similarity index 100%
rename from Boot init.lua/start_boot.lua
rename to Boot init.lua/oldies/start_boot.lua
diff --git a/Boot init.lua/start_demo1.lua b/Boot init.lua/oldies/start_demo1.lua
similarity index 100%
rename from Boot init.lua/start_demo1.lua
rename to Boot init.lua/oldies/start_demo1.lua
diff --git a/Bootstrap/start_job.lua b/Boot init.lua/oldies/start_job.lua
similarity index 100%
rename from Bootstrap/start_job.lua
rename to Boot init.lua/oldies/start_job.lua
diff --git a/Boot init.lua/stop.lua b/Boot init.lua/oldies/stop.lua
similarity index 100%
rename from Boot init.lua/stop.lua
rename to Boot init.lua/oldies/stop.lua
diff --git a/Bootstrap/initz.lua b/Bootstrap/initz.lua
deleted file mode 100644
index ab93bf3..0000000
--- a/Bootstrap/initz.lua
+++ /dev/null
@@ -1,75 +0,0 @@
--- initz.lua
--- test si clic sur le bouton
--- clic <2s goto start.lua
--- clic >2s goto config wifi
-print("\ninit.lua zf180720.1550    \n")
-
-zBTNz  = 3 -- GPIO0 button
---zRelay = 6 -- GPIO12 PWM0 relay (active high)
-zLEDz = 0 -- SonOff: 7 GPIO13 PWM1, NodeMCU: 0, (active low)
-zFlag_LEDz = 0
-
-function blink_LEDz ()
-    if zFlag_LEDz==gpio.LOW then 
-        zFlag_LEDz=gpio.HIGH   tmr.alarm(ztmr_LEDz, zTm_Off_LEDz, tmr.ALARM_SINGLE, blink_LEDz)
-    else 
-        zFlag_LEDz=gpio.LOW   tmr.alarm(ztmr_LEDz, zTm_On_LEDz, tmr.ALARM_SINGLE, blink_LEDz)
-    end
-    gpio.write(zLEDz, zFlag_LEDz)
-end
-
-gpio.mode(zLEDz, gpio.OUTPUT)
-ztmr_LEDz = tmr.create()   zTm_On_LEDz = 500   zTm_Off_LEDz = 500   blink_LEDz ()
-
-function btn_testz()
-    t2z=tmr.now()
-    t3z=(t2z-t1z)/1000000
-    if gpio.read(zBTNz)==1 then
-        tmr.stop(ztmr_btnz)
-        tmr.stop(ztmr_LEDz)   gpio.write(zLEDz,1)
-        print("start.lua")
-        ztmr_clear_bootstrapz = tmr.create()
-        tmr.alarm(ztmr_clear_bootstrapz, 1000, tmr.ALARM_SINGLE, function() dofile("clear_bootstrap.lua") end)
-        dofile("start.lua")
-    else
-        if t3z>3 then
-            tmr.stop(ztmr_btnz)
-            zTm_On_LEDz = 100   zTm_Off_LEDz = 100   blink_LEDz ()
-            wifi.sta.disconnect()   wifi.sta.clearconfig()
-            print("\nwifi config http://192.168.4.1\n")
-            ztmr_get_ipz = tmr.create()   tmr.alarm(ztmr_get_ipz, 4000, tmr.ALARM_AUTO , get_ipz)
-            enduser_setup.start()
-        end
-    end
-end
-
-function btn_clicz()
-    gpio.trig(zBTNz, "none")   gpio.mode(zBTNz,gpio.INPUT)
-    t1z=tmr.now()
-    tmr.stop(ztmr_LEDz)   gpio.write(zLEDz,0)
-    ztmr_btnz = tmr.create()   tmr.alarm(ztmr_btnz, 500,tmr.ALARM_AUTO, btn_testz)
-end
-
-function get_ipz()
-    if wifi.sta.getip() == nil then
-        print("Connecting to AP...")
-    else
-        tmr.stop(ztmr_get_ipz)
-        print("Connected! IP: ",wifi.sta.getip())
-        tmr.alarm(ztmr_get_ipz,1000,tmr.ALARM_SINGLE, function() node.restart() end)
-    end
-end
-
-function dir()
-    l=file.list() i=0
-    for k,v in pairs(l) do
-        i=i+v print(k..string.rep(" ",19-string.len(k)).." : "..v.." bytes")
-    end
-    print('\nUsed: '..i..' bytes\nusage: dofile("file.lua")\n')
-end
-
-gpio.mode(zBTNz,gpio.INT)   gpio.trig(zBTNz, "down", btn_clicz)
-
-wifi.sta.connect()
-dofile("telnet_srv.lua")
-
diff --git a/Bootstrap/start_boot.lua b/Bootstrap/start_boot.lua
deleted file mode 100644
index 871db33..0000000
--- a/Bootstrap/start_boot.lua
+++ /dev/null
@@ -1,9 +0,0 @@
--- Scripts à charger au moment du boot afin de pouvoir travailler avec le le réseau
-print("\n start_boot.lua zf180909.1116 \n")
-
---dofile("wifi_cnf_start.lua")
---dofile("wifi_ap_stop.lua")
---dofile("wifi_cli_start.lua")
---dofile("web_srv.lua")
---dofile("telnet_srv.lua")
-
diff --git a/DeepSleep/test1/blink_led1.lua b/DeepSleep/test1/blink_led1.lua
new file mode 100644
index 0000000..43a0e80
--- /dev/null
+++ b/DeepSleep/test1/blink_led1.lua
@@ -0,0 +1,23 @@
+-- programme pour faire clignoter une LED avec un rapport on/off
+
+print("\n blink_led1.lua zf181116.0014 \n")
+
+zLED=0
+zTm_On_LED = 50    --> en ms
+zTm_Off_LED = 500    --> en ms
+zFlag_LED = 0
+
+function blink_LED ()
+    if zFlag_LED==gpio.LOW then 
+        zFlag_LED=gpio.HIGH
+        tmr.alarm(ztmr_LED, zTm_Off_LED, tmr.ALARM_SINGLE, blink_LED)
+    else 
+        zFlag_LED=gpio.LOW
+        tmr.alarm(ztmr_LED, zTm_On_LED, tmr.ALARM_SINGLE, blink_LED)
+    end
+    gpio.write(zLED, zFlag_LED)
+end
+
+gpio.mode(zLED, gpio.OUTPUT)
+ztmr_LED = tmr.create()
+blink_LED ()
diff --git a/DeepSleep/dsleep.lua b/DeepSleep/test1/dsleep.lua
similarity index 72%
rename from DeepSleep/dsleep.lua
rename to DeepSleep/test1/dsleep.lua
index 799d3c5..56c8d38 100644
--- a/DeepSleep/dsleep.lua
+++ b/DeepSleep/test1/dsleep.lua
@@ -1,9 +1,10 @@
 -- Teste le deep sleep !
 -- s'endore pendant 3 secondes après 8 secondes
--- à mettre à la place du init.lua
+-- à mettre à la place du init.lua !
+
 -- ATTENTION: il faut connecter la pin 0 à la pin RESET !
 
-print("\n dsleep.lua   zf181113.2040   \n")
+print("\n dsleep.lua   zf181118.21227   \n")
 
 _, reset_reason = node.bootreason()
 print("reset_reason: ",reset_reason)
@@ -12,7 +13,7 @@ if reset_reason == 5 then print("Coucou, je suis réveillé...") end
 if reset_reason == 6 then print("Coucou, hard reset...") end
 
 ztmr_SLEEP = tmr.create()
-tmr.alarm(ztmr_SLEEP, 8000, tmr.ALARM_SINGLE, function ()
+tmr.alarm(ztmr_SLEEP, 10*1000, tmr.ALARM_SINGLE, function ()
     print("Je dors...")
-    node.dsleep(3000000)
+    node.dsleep(10*1000*1000)
 end)
diff --git a/DeepSleep/test1/flash_led_xfois.lua b/DeepSleep/test1/flash_led_xfois.lua
new file mode 100644
index 0000000..76e62b2
--- /dev/null
+++ b/DeepSleep/test1/flash_led_xfois.lua
@@ -0,0 +1,32 @@
+-- programme pour faire clignoter x fois une LED avec un rapport on/off
+print("\n flash_led_xfois.lua zf181105.1111 \n")
+
+zLED=0
+zTm_On_LED = 50    --> en ms
+zTm_Off_LED = 100    --> en ms
+nbfois = 0
+gpio.write(zLED, gpio.HIGH)
+gpio.mode(zLED, gpio.OUTPUT)
+ztmr_Flash_LED = tmr.create()
+
+function blink_LED ()
+    if nbfois >= xfois then
+        print(nbfois)
+        nbfois = 0
+    else 
+        if gpio.read(zLED)==gpio.HIGH then
+            gpio.write(zLED, gpio.LOW)
+            tmr.alarm(ztmr_Flash_LED, zTm_Off_LED, tmr.ALARM_SINGLE, blink_LED)
+        else 
+            gpio.write(zLED, gpio.HIGH)
+            nbfois = nbfois+1
+            tmr.alarm(ztmr_Flash_LED, zTm_On_LED, tmr.ALARM_SINGLE, blink_LED)
+        end
+    end
+end
+
+xfois =2
+blink_LED ()
+
+
+
diff --git a/DeepSleep/test1/initz.lua b/DeepSleep/test1/initz.lua
new file mode 100644
index 0000000..97951ca
--- /dev/null
+++ b/DeepSleep/test1/initz.lua
@@ -0,0 +1,23 @@
+--Script de bootstrap, en appuyant sur le bouton ça démarre start_boot,
+-- autrement en attendant 8 secondes cela démarre start_boot
+
+print("\n init.lua zf181017.1026\n")
+
+zswitch=3     --switch flash
+gpio.mode(zswitch, gpio.INT, gpio.PULLUP)
+initalarme=tmr.create()
+
+function hvbouton()
+    gpio.trig(zswitch, "none")
+    tmr.unregister(initalarme)
+    dofile("start_boot.lua")
+--    dofile("start_job.lua")
+end
+
+gpio.trig(zswitch, "both", hvbouton)
+
+tmr.alarm(initalarme, 8000,  tmr.ALARM_SINGLE, function()
+    print("\nStart\n")
+    dofile("start_boot.lua")
+--    dofile("start_job.lua")
+end)
diff --git a/DeepSleep/test1/rm_files.lua b/DeepSleep/test1/rm_files.lua
new file mode 100644
index 0000000..81241cb
--- /dev/null
+++ b/DeepSleep/test1/rm_files.lua
@@ -0,0 +1,12 @@
+-- pour effacer TOUS les fichiers qui se trouve dans la flash du NodeMCU
+
+print("\n rm_files.lua zf180907.1511 \n")
+
+
+l=file.list() i=0
+for k,v in pairs(l) do
+    i=i+v
+    file.remove(k)
+end
+print("-------------------------------")
+print("\nC'est tout effaced :-) \n")
diff --git a/DeepSleep/test1/start_boot.lua b/DeepSleep/test1/start_boot.lua
new file mode 100644
index 0000000..9cdf130
--- /dev/null
+++ b/DeepSleep/test1/start_boot.lua
@@ -0,0 +1,7 @@
+-- Scripts à charger au moment du boot
+
+print("\n start_boot.lua zf181118.1043 \n")
+
+dofile("dsleep.lua")
+
+
diff --git a/DeepSleep/test1/wifi_off.lua b/DeepSleep/test1/wifi_off.lua
new file mode 100644
index 0000000..c1c7235
--- /dev/null
+++ b/DeepSleep/test1/wifi_off.lua
@@ -0,0 +1,9 @@
+-- Déconnecte le WIFI
+print("\n wifi_off.lua   zf180822.0959   \n")
+
+wifi.setmode(wifi.NULLMODE)
+
+--[[
+print(wifi.NULLMODE, wifi.STATION, wifi.SOFTAP, wifi.STATIONAP)
+print(wifi.getmode())
+]]
diff --git a/Net_utils/telnet_srv.lua b/Net_utils/telnet_srv.lua
new file mode 100644
index 0000000..e817d66
--- /dev/null
+++ b/Net_utils/telnet_srv.lua
@@ -0,0 +1,43 @@
+-- a simple telnet server
+print("\ntelnet_srv.lua   zf181119.0005   \n")
+
+-- restart server if needed
+if telnet_srv ~= nil then
+    telnet_srv:close()
+end
+telnet_srv = net.createServer(net.TCP, 180)
+
+telnet_srv:listen(23, function(socket)
+    local fifo = {}
+    local fifo_drained = true
+
+    local function sender(c)
+        if #fifo > 0 then
+            c:send(table.remove(fifo, 1))
+        else
+            fifo_drained = true
+        end
+    end
+
+    local function s_output(str)
+        table.insert(fifo, str)
+        if socket ~= nil and fifo_drained then
+            fifo_drained = false
+            sender(socket)
+        end
+    end
+
+    node.output(s_output, 0)   -- re-direct output to function s_ouput.
+
+    socket:on("receive", function(c, l)
+        node.input(l)           -- works like pcall(loadstring(l)) but support multiple separate line
+    end)
+    socket:on("disconnection", function(c)
+        node.output(nil)        -- un-regist the redirect output function, output goes to serial
+    end)
+    socket:on("sent", sender)
+
+    print("Welcome to NodeMCU world.")
+end)
+
+print("Telnet server running...\nUsage: telnet -rN ip\n")
diff --git a/Wifi/wifi_ap_start.lua b/Wifi/wifi_ap_start.lua
index ce3c29b..5934835 100644
--- a/Wifi/wifi_ap_start.lua
+++ b/Wifi/wifi_ap_start.lua
@@ -1,5 +1,6 @@
 -- Démarre le WIFI en mode AP
-print("\n wifi_ap_start.lua   zf180824.2000   \n")
+
+print("\n wifi_ap_start.lua   zf181118.2331   \n")
 
 local zmodewifi=wifi.getmode()
 if zmodewifi == wifi.NULLMODE then
@@ -10,4 +11,4 @@ elseif zmodewifi == wifi.STATION then
     wifi.setmode(wifi.STATIONAP)
 end
 wifi.ap.config({ ssid = "NodeMCU "..wifi.ap.getmac(), pwd = "12345678" })
-dofile("wifi_info.lua")
+if file.exists("wifi_info.lua") then dofile("wifi_info.lua") end
diff --git a/Wifi/wifi_info.lua b/Wifi/wifi_info.lua
index d81fc1b..5062fcf 100644
--- a/Wifi/wifi_info.lua
+++ b/Wifi/wifi_info.lua
@@ -1,5 +1,5 @@
 -- Petit script pour afficher les infos actuel du WIFI
-print("\n wifi_info.lua   zf180824.2000   \n")
+print("\n wifi_info.lua   zf181119.0014   \n")
 
 local zmodewifi=wifi.getmode()
 
@@ -16,8 +16,9 @@ elseif zmodewifi == wifi.STATION then
     end
 elseif zmodewifi == wifi.SOFTAP then
     print("WIFI mode AP")
-    print("AP MAC:\n\t"..wifi.ap.getmac())
-    print("AP IP:\n\t"..wifi.ap.getip())
+    print("AP MAC:\n",wifi.ap.getmac())
+    print("AP IP:\n",wifi.ap.getip())
+    print("AP Connect:\n",wifi.ap.getconfig())
 elseif zmodewifi == wifi.STATIONAP then
     print("WIFI mode CLI+AP")
     print("Connected IP:\n",wifi.sta.getip())