diff --git a/Boot init.lua/mini/test webide/blink_led2.lua b/Boot init.lua/mini/test webide/blink_led2.lua new file mode 100644 index 0000000..70fa251 --- /dev/null +++ b/Boot init.lua/mini/test webide/blink_led2.lua @@ -0,0 +1,17 @@ +-- programme pour faire clignoter une LED version simplifiée + +print("\n blink_led2.lua zf181015.1138 \n") + +zLED=0 +gpio.mode(zLED, gpio.OUTPUT) +ztmr_LED = tmr.create() +value = true + +tmr.alarm(ztmr_LED, 100, tmr.ALARM_AUTO, function () + if value then + gpio.write(zLED, gpio.HIGH) + else + gpio.write(zLED, gpio.LOW) + end + value = not value +end) diff --git a/Boot init.lua/mini/test webide/boot.lua b/Boot init.lua/mini/test webide/boot.lua new file mode 100644 index 0000000..00e7325 --- /dev/null +++ b/Boot init.lua/mini/test webide/boot.lua @@ -0,0 +1,13 @@ +-- Scripts à charger après le boot pour démarrer son appli + +print("\n boot.lua zf181119.1518 \n") + +--if file.exists("wifi_ap_stop.lua") then dofile("wifi_ap_stop.lua") end +--if file.exists("dsleep.lua") then dofile("dsleep.lua") end +--if file.exists("wifi_cli_start.lua") then dofile("wifi_cli_start.lua") end +if file.exists("repair.lua") then dofile("repair.lua") end + +jobtimer1=tmr.create() +--tmr.alarm(jobtimer1, 1*1000, tmr.ALARM_AUTO, function() +-- print("coucou...") +--end) diff --git a/Boot init.lua/mini/test webide/cat.lua b/Boot init.lua/mini/test webide/cat.lua new file mode 100644 index 0000000..7c309b9 --- /dev/null +++ b/Boot init.lua/mini/test webide/cat.lua @@ -0,0 +1,17 @@ +-- fonction cat() pour afficher le contenu d'un fichier dans la flash +print("\n cat.lua zf180826.1109 \n") + +function cat(zfile) + print("\n"..zfile.."\n-------------------------------") + + zfilei = file.open(zfile, "r") + i=1 + zline=file.readline() + repeat + print(i..": "..string.sub(zline,1,string.len(zline)-1)) + i=i+1 zline=file.readline() + until zline== nil + file.close(zfilei) + + print("-------------------------------") +end diff --git a/Boot init.lua/mini/test webide/dir.lua b/Boot init.lua/mini/test webide/dir.lua new file mode 100644 index 0000000..8bf9414 --- /dev/null +++ b/Boot init.lua/mini/test webide/dir.lua @@ -0,0 +1,15 @@ +-- fonction dir() pour afficher les fichiers dans la flash +print("\n dir.lua zf180826.1019 \n") + +function dir() + print("\n-------------------------------") + l=file.list() i=0 + for k,v in pairs(l) do + i=i+v + print(k..string.rep(" ",19-string.len(k)).." : "..v.." bytes") + end + print("-------------------------------") + print('\nUsed: '..i..' bytes\nusage: dofile("file.lua")\n') +end + +dir() diff --git a/Boot init.lua/mini/test webide/ide.lua b/Boot init.lua/mini/test webide/ide.lua new file mode 100644 index 0000000..3c17abf --- /dev/null +++ b/Boot init.lua/mini/test webide/ide.lua @@ -0,0 +1,249 @@ +-- Petit WEB IDE tout simple à tester + +print("\n ide.lua zf181119.1419 \n") + +--[[ +XChip's NodeMCU IDE +Original Source: http://www.esp8266.com/viewtopic.php?f=19&t=1549 + +Petr Stehlik found the source in October 2016 and gave it a new home +at https://github.com/joysfera/nodemcu-web-ide under the GPL license. +Then updated it for new async socket send(), fixed, cleaned up, +added external editor with syntax highlighting and further improves it. + +Create, Edit and run NodeMCU files using your web browser. +Examples: +http:/// will list all the files in the MCU +http:///newfile.lua displays the file on your browser +http:///newfile.lua?edit allows to creates or edits the specified script in your browser +http:///newfile.lua?run it will run the specified script and will show the returned value +--]] + +local function editor(aceEnabled) -- feel free to disable the shiny Ajax.org Cloud Editor + local AceEnabled = aceEnabled == nil and true or aceEnabled + srv = net.createServer(net.TCP) + srv:listen(80, function(conn) + + local rnrn = 0 + local Status = 0 + local DataToGet = 0 + local method = "" + local url = "" + local vars = "" + + conn:on("receive", function(sck, payload) + + if Status == 0 then + _, _, method, url, vars = string.find(payload, "([A-Z]+) /([^?]*)%??(.*) HTTP") + -- print("Method, URL, vars: ", method, url, vars) + end + + if method == "POST" then + + if Status == 0 then + -- print("status", Status) + _, _, DataToGet, payload = string.find(payload, "Content%-Length: (%d+)(.+)") + if DataToGet then + DataToGet = tonumber(DataToGet) + -- print("DataToGet = "..DataToGet) + rnrn = 1 + Status = 1 + else + print("bad length") + end + end + + -- find /r/n/r/n + if Status == 1 then + -- print("status", Status) + local payloadlen = string.len(payload) + local mark = "\r\n\r\n" + local i + for i=1, payloadlen do + if string.byte(mark, rnrn) == string.byte(payload, i) then + rnrn = rnrn + 1 + if rnrn == 5 then + payload = string.sub(payload, i+1, payloadlen) + file.open(url, "w") + file.close() + Status = 2 + break + end + else + rnrn = 1 + end + end + if Status == 1 then + return + end + end + + if Status == 2 then + -- print("status", Status) + if payload then + DataToGet = DataToGet - string.len(payload) + --print("DataToGet:", DataToGet, "payload len:", string.len(payload)) + file.open(url, "a+") + file.write(payload) + file.close() + else + sck:send("HTTP/1.1 200 OK\r\n\r\nERROR") + Status = 0 + end + + if DataToGet == 0 then + sck:send("HTTP/1.1 200 OK\r\n\r\nOK") + Status = 0 + end + end + + return + end + -- end of POST method handling + + DataToGet = -1 + + if url == "favicon.ico" then + -- print("favicon.ico handler sends 404") + sck:send("HTTP/1.1 404 file not found") + return + end + + local sen = "HTTP/1.1 200 OK\r\n\r\n" + + -- it wants a file in particular + if url ~= "" and vars == "" then + DataToGet = 0 + sck:send(sen) + return + end + + sen = sen .. "

NodeMCU IDE

" + + if vars == "edit" then + if AceEnabled then + local mode = 'ace/mode/' + if url:match(".css") then mode = mode .. 'css' + elseif url:match(".html") then mode = mode .. 'html' + elseif url:match(".json") then mode = mode .. 'json' + elseif url:match(".js") then mode = mode .. 'javascript' + else mode = mode .. 'lua' + end + sen = sen .. "
" + .. "" + else + sen = sen .. "
" + .. "" + end + sen = sen .. " run " + + elseif vars == "run" then + sen = sen .. "" + + function s_output(str) sen = sen .. str end + node.output(s_output, 0) -- re-direct output to function s_output. + + local st, result = pcall(dofile, url) + + -- delay the output capture by 1000 milliseconds to give some time to the user routine in pcall() + tmr.alarm(0, 1000, tmr.ALARM_SINGLE, function() + node.output(nil) + if result then + local outp = tostring(result):sub(1,1300) -- to fit in one send() packet + result = nil + sen = sen .. "
Result of the run: " .. outp .. "
" + end + sen = sen .. "" + sck:send(sen) + end) + + return + + elseif vars == "compile" then + collectgarbage() + node.compile(url) + url = "" + + elseif vars == "delete" then + file.remove(url) + url = "" + + elseif vars == "restart" then + node.restart() + return + + end + + local message = {} + message[#message + 1] = sen + sen = nil + if url == "" then + local l = file.list(); + message[#message + 1] = "" + for k,v in pairs(l) do + local line = "" + message[#message + 1] = line + end + message[#message + 1] = "
NameSizeEditCompileDelete
" ..k.. "" ..v.. "" + local editable = k:sub(-4, -1) == ".lua" or k:sub(-4, -1) == ".css" or k:sub(-5, -1) == ".html" or k:sub(-5, -1) == ".json" + if editable then + line = line .. "edit" + end + line = line .. "" + if k:sub(-4, -1) == ".lua" then + line = line .. "compile" + end + line = line .. "delete
Create new     " + message[#message + 1] = "Restart" + end + message[#message + 1] = "" + + local function send_table(sk) + if #message > 0 then + sk:send(table.remove(message, 1)) + else + sk:close() + message = nil + end + end + sck:on("sent", send_table) + send_table(sck) + end) + + conn:on("sent", function(sck) + if DataToGet >= 0 and method == "GET" then + if file.open(url, "r") then + file.seek("set", DataToGet) + local chunkSize = 512 + local line = file.read(chunkSize) + file.close() + if line then + sck:send(line) + DataToGet = DataToGet + chunkSize + if string.len(line) == chunkSize then return end + end + end + end + + sck:close() + sck = nil + end) + end) +end + +--[[if wifi.sta.status() == wifi.STA_GOTIP then + print("http://"..wifi.sta.getip().."/") + editor() +else + print("WiFi connecting...") + wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function() + wifi.eventmon.unregister(wifi.eventmon.STA_GOT_IP) + print("http://"..wifi.sta.getip().."/") + editor() + end) +end +]] + editor() + diff --git a/Boot init.lua/mini/test webide/ide2.lua b/Boot init.lua/mini/test webide/ide2.lua new file mode 100644 index 0000000..29e64ba --- /dev/null +++ b/Boot init.lua/mini/test webide/ide2.lua @@ -0,0 +1,158 @@ +-- Petit WEB IDE tout simple à tester + +print("\n ide2.lua zf181119.1505 \n") + +--[[ +XChip's NodeMCU IDE + +Create, Edit and run NodeMCU files using your webbrowser. +Examples: +http:/// will list all the files in the MCU +http:///newfile.lua displays the file on your browser +http:///newfile.lua?edit allows to creates or edits the specified script in your browser +http:///newfile.lua?run it will run the specified script and will show the returned value + +]]-- + +srv=net.createServer(net.TCP) +srv:listen(80,function(conn) + + local rnrn=0 + local Status = 0 + local DataToGet = 0 + local method="" + local url="" + local vars="" + + conn:on("receive",function(conn,payload) + + if Status==0 then + _, _, method, url, vars = string.find(payload, "([A-Z]+) /([^?]*)%??(.*) HTTP") + print(method, url, vars) + end + + if method=="POST" then + + if Status==0 then + --print("status", Status) + _,_,DataToGet, payload = string.find(payload, "Content%-Length: (%d+)(.+)") + if DataToGet~=nil then + DataToGet = tonumber(DataToGet) + --print(DataToGet) + rnrn=1 + Status = 1 + else + print("bad length") + end + end + + -- find /r/n/r/n + if Status==1 then + --print("status", Status) + local payloadlen = string.len(payload) + local mark = "\r\n\r\n" + local i + for i=1, payloadlen do + if string.byte(mark, rnrn) == string.byte(payload, i) then + rnrn=rnrn+1 + if rnrn==5 then + payload = string.sub(payload, i+1,payloadlen) + file.open(url, "w") + file.close() + Status=2 + break + end + else + rnrn=1 + end + end + if Status==1 then + return + end + end + + if Status==2 then + --print("status", Status) + if payload~=nil then + DataToGet=DataToGet-string.len(payload) + --print("DataToGet:", DataToGet, "payload len:", string.len(payload)) + file.open(url, "a+") + file.write(payload) + file.close() + else + conn:send("HTTP/1.1 200 OK\r\n\r\nERROR") + Status=0 + end + + if DataToGet==0 then + conn:send("HTTP/1.1 200 OK\r\n\r\nOK") + Status=0 + end + end + + return + end + + DataToGet = -1 + + if url == "favicon.ico" then + conn:send("HTTP/1.1 404 file not found") + return + end + + conn:send("HTTP/1.1 200 OK\r\n\r\n") + + -- it wants a file in particular + if url~="" and vars=="" then + DataToGet = 0 + return + end + + conn:send("

NodeMCU IDE

") + + if vars=="edit" then + conn:send("") + conn:send("Back to file list


") + conn:send("run") + end + + if vars=="run" then + conn:send("") + local st, result=pcall(dofile, url) + conn:send(tostring(result)) + conn:send("") + end + + if url=="" then + local l = file.list(); + for k,v in pairs(l) do + conn:send(""..k..", size:"..v.."
") + end + end + + conn:send("") + + end) + conn:on("sent",function(conn) + if DataToGet>=0 and method=="GET" then + if file.open(url, "r") then + file.seek("set", DataToGet) + local line=file.read(512) + file.close() + if line then + conn:send(line) + DataToGet = DataToGet + 512 + + if (string.len(line)==512) then + return + end + end + end + end + + conn:close() + end) +end) +print("listening, free:", node.heap()) + diff --git a/Boot init.lua/mini/test webide/initz.lua b/Boot init.lua/mini/test webide/initz.lua new file mode 100644 index 0000000..9b8563a --- /dev/null +++ b/Boot init.lua/mini/test webide/initz.lua @@ -0,0 +1,18 @@ +--Script de bootstrap, test au moment du boot qui a été la cause de boot. +-- Si la cause est un power on ou une connexion depuis l'IDE, alors +-- le script repair.lua pendant 30 secondes avant de continuer + +print("\n init.lua zf181119.1408 \n") + +_, reset_reason = node.bootreason() +print("reset_reason:",reset_reason) +if reset_reason == 0 or reset_reason == 6 then + print("seconde chance...") + if file.exists("repair.lua") then dofile("repair.lua") end + initalarme=tmr.create() + tmr.alarm(initalarme, 300*1000, tmr.ALARM_SINGLE, function() + if file.exists("boot.lua") then dofile("boot.lua") end + end) +else + if file.exists("boot.lua") then dofile("boot.lua") end +end diff --git a/Boot init.lua/mini/test webide/repair.lua b/Boot init.lua/mini/test webide/repair.lua new file mode 100644 index 0000000..e1a54d7 --- /dev/null +++ b/Boot init.lua/mini/test webide/repair.lua @@ -0,0 +1,15 @@ +-- Scripts de seconde chance pour réparer une boucle dans le restart + +print("\n repair.lua zf181119.1511 \n") + +--if file.exists("wifi_ap_start.lua") then dofile("wifi_ap_start.lua") end +if file.exists("wifi_ap_stop.lua") then dofile("wifi_ap_stop.lua") end +if file.exists("wifi_cli_conf.lua") then dofile("wifi_cli_conf.lua") end +if file.exists("wifi_cli_start.lua") then dofile("wifi_cli_start.lua") end +if file.exists("ide2.lua") then dofile("ide2.lua") end +if file.exists("telnet_srv.lua") then dofile("telnet_srv.lua") end + +jobtimer1=tmr.create() +tmr.alarm(jobtimer1, 5*1000, tmr.ALARM_AUTO, function() +-- print("repair...") +end) diff --git a/Boot init.lua/mini/test wifi connect/boot.lua b/Boot init.lua/mini/test wifi connect/boot.lua new file mode 100644 index 0000000..a515208 --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/boot.lua @@ -0,0 +1,21 @@ +-- Scripts à charger après le boot pour démarrer son appli + +print("\n boot.lua zf181119.2351 \n") + +f= "wifi_ap_stop.lua" if file.exists(f) then dofile(f) end +--f= "wifi_cli_conf.lua" if file.exists(f) then dofile(f) end +f= "wifi_cli_start.lua" if file.exists(f) then dofile(f) end +f= "dsleep.lua" if file.exists(f) then dofile(f) end + +x_dsleep=7 y_dsleep=5 dsleep() + +jobtimer1=tmr.create() +tmr.alarm(jobtimer1, 1*1000, tmr.ALARM_AUTO, function() + print("coucou...") + if wifi.sta.getip() ~= nil then + tmr.stop(jobtimer1) + tmr.stop(ztmr_SLEEP) + x_dsleep=12 y_dsleep=5 dsleep() + print("c'est connecté...") + end +end) diff --git a/Boot init.lua/mini/test wifi connect/dsleep.lua b/Boot init.lua/mini/test wifi connect/dsleep.lua new file mode 100644 index 0000000..43edb7d --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/dsleep.lua @@ -0,0 +1,14 @@ +-- Teste le deep sleep ! +-- après x seconde, s'endore pendant y secondes +-- ATTENTION: il faut connecter, avec une résistance de 1k, la pin 0 à la pin RESET ! + +print("\n dsleep.lua zf181119.2343 \n") + +ztmr_SLEEP = tmr.create() + +function dsleep() + tmr.alarm(ztmr_SLEEP, x_dsleep*1000, tmr.ALARM_SINGLE, function () + print("Je dors...") + node.dsleep(y_dsleep*1000*1000) + end) +end \ No newline at end of file diff --git a/Boot init.lua/mini/test wifi connect/initz.lua b/Boot init.lua/mini/test wifi connect/initz.lua new file mode 100644 index 0000000..79258ee --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/initz.lua @@ -0,0 +1,18 @@ +--Script de bootstrap, test au moment du boot qui a été la cause de boot. +-- Si la cause est un power on ou une connexion depuis l'IDE, alors +-- le script repair.lua pendant 30 secondes avant de continuer + +print("\n init.lua zf181119.2314 \n") + +_, reset_reason = node.bootreason() +print("reset_reason:",reset_reason) +if reset_reason == 0 or reset_reason == 6 then + print("seconde chance...") + f= "repair.lua" if file.exists(f) then dofile(f) end + initalarme=tmr.create() + tmr.alarm(initalarme, 300*1000, tmr.ALARM_SINGLE, function() + f= "boot.lua" if file.exists(f) then dofile(f) end + end) +else + f= "boot.lua" if file.exists(f) then dofile(f) end +end diff --git a/Boot init.lua/mini/test wifi connect/wifi_ap_stop.lua b/Boot init.lua/mini/test wifi connect/wifi_ap_stop.lua new file mode 100644 index 0000000..2738627 --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/wifi_ap_stop.lua @@ -0,0 +1,10 @@ +-- Démarre le WIFI en mode AP +print("\n wifi_ap_stop.lua zf180824.2000 \n") + +local zmodewifi=wifi.getmode() +if zmodewifi == wifi.SOFTAP then + wifi.setmode(wifi.NULLMODE) +elseif zmodewifi == wifi.STATIONAP then + wifi.setmode(wifi.STATION) +end +print("WIFI AP arrêté") diff --git a/Boot init.lua/mini/test wifi connect/wifi_cli_conf.lua b/Boot init.lua/mini/test wifi connect/wifi_cli_conf.lua new file mode 100644 index 0000000..f01a799 --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/wifi_cli_conf.lua @@ -0,0 +1,4 @@ +-- Petit script pour configurer le client WIFI du NodeMCU +print("\n wifi_cli_conf.lua zf180824.2000 \n") + +wifi.sta.config{ssid="3g-s7", pwd="12234567", save=true} diff --git a/Boot init.lua/mini/test wifi connect/wifi_cli_start.lua b/Boot init.lua/mini/test wifi connect/wifi_cli_start.lua new file mode 100644 index 0000000..aac8bea --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/wifi_cli_start.lua @@ -0,0 +1,14 @@ +-- Petit script pour connecter le NodeMCU sur un AP Wifi avec l'accompte sauvé en EEPROM +print("\n wifi_cli_start.lua zf180824.2000 \n") + +local zmodewifi=wifi.getmode() +if zmodewifi == wifi.NULLMODE then + print("WIFI mode CLI only") + wifi.setmode(wifi.STATION) +elseif zmodewifi == wifi.SOFTAP then + print("WIFI mode AP+CLI") + wifi.setmode(wifi.STATIONAP) +end +wifi.sta.autoconnect(1) +wifi.sta.connect() +dofile("wifi_get_ip.lua") diff --git a/Boot init.lua/mini/test wifi connect/wifi_cli_stop.lua b/Boot init.lua/mini/test wifi connect/wifi_cli_stop.lua new file mode 100644 index 0000000..9429aa5 --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/wifi_cli_stop.lua @@ -0,0 +1,10 @@ +-- Démarre le WIFI en mode AP +print("\n wifi_cli_stop.lua zf180824.2000 \n") + +local zmodewifi=wifi.getmode() +if zmodewifi == wifi.STATION then + wifi.setmode(wifi.NULLMODE) +elseif zmodewifi == wifi.STATIONAP then + wifi.setmode(wifi.SOFTAP) +end +print("WIFI CLI arrêté") diff --git a/Boot init.lua/mini/test wifi connect/wifi_get_ip.lua b/Boot init.lua/mini/test wifi connect/wifi_get_ip.lua new file mode 100644 index 0000000..82bcdc2 --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/wifi_get_ip.lua @@ -0,0 +1,12 @@ +-- Petit script pour obtenir l'adresse IP du NodeMCU connecté sur un AP Wifi +print("\n wifi_get_ip.lua zf181119.2318 \n") + +wifitimer1=tmr.create() +tmr.alarm(wifitimer1, 1000, tmr.ALARM_AUTO , function() + if wifi.sta.getip() == nil then + print("Connecting to AP...") + else + tmr.stop(wifitimer1) + f= "wifi_info.lua" if file.exists(f) then dofile(f) end + end +end) diff --git a/Boot init.lua/mini/test wifi connect/wifi_info.lua b/Boot init.lua/mini/test wifi connect/wifi_info.lua new file mode 100644 index 0000000..5062fcf --- /dev/null +++ b/Boot init.lua/mini/test wifi connect/wifi_info.lua @@ -0,0 +1,31 @@ +-- Petit script pour afficher les infos actuel du WIFI +print("\n wifi_info.lua zf181119.0014 \n") + +local zmodewifi=wifi.getmode() + +--wifi.NULLMODE, wifi.STATION, wifi.SOFTAP, wifi.STATIONAP + +if zmodewifi == wifi.NULLMODE then + print("WIFI OFF") +elseif zmodewifi == wifi.STATION then + print("WIFI mode CLI") + print("Connected IP:\n",wifi.sta.getip()) + do + local sta_config=wifi.sta.getconfig(true) + print(string.format("Current client config:\n\tssid:\"%s\"\tpassword:\"%s\"\n\tbssid:\"%s\"\tbssid_set:%s", sta_config.ssid, sta_config.pwd, sta_config.bssid, (sta_config.bssid_set and "true" or "false"))) + end +elseif zmodewifi == wifi.SOFTAP then + print("WIFI mode AP") + print("AP MAC:\n",wifi.ap.getmac()) + print("AP IP:\n",wifi.ap.getip()) + print("AP Connect:\n",wifi.ap.getconfig()) +elseif zmodewifi == wifi.STATIONAP then + print("WIFI mode CLI+AP") + print("Connected IP:\n",wifi.sta.getip()) + do + local sta_config=wifi.sta.getconfig(true) + print(string.format("Current client config:\n\tssid:\"%s\"\tpassword:\"%s\"\n\tbssid:\"%s\"\tbssid_set:%s", sta_config.ssid, sta_config.pwd, sta_config.bssid, (sta_config.bssid_set and "true" or "false"))) + end + print("AP MAC: "..wifi.ap.getmac()) + print("AP IP: "..wifi.ap.getip()) +end diff --git a/WebIDE/test1/nodemcu-web-ide-master/LICENSE b/WebIDE/test1/nodemcu-web-ide-master/LICENSE new file mode 100644 index 0000000..9cecc1d --- /dev/null +++ b/WebIDE/test1/nodemcu-web-ide-master/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + {one line to give the program's name and a brief idea of what it does.} + Copyright (C) {year} {name of author} + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + {project} Copyright (C) {year} {fullname} + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/WebIDE/test1/nodemcu-web-ide-master/README.md b/WebIDE/test1/nodemcu-web-ide-master/README.md new file mode 100644 index 0000000..f9e713b --- /dev/null +++ b/WebIDE/test1/nodemcu-web-ide-master/README.md @@ -0,0 +1,15 @@ +# nodemcu-web-ide +Simple Web IDE running on NodeMCU Lua + +Originaly written by XChip in February 2015 and published in +http://www.esp8266.com/viewtopic.php?f=19&t=1549 + +Picked up by Petr Stehlík in October 2016, updated for recent NodeMCU based on SDK 1.5.x, fixed async socket:send issues, cleaned up and started improving. + +https://github.com/joysfera/nodemcu-web-ide + +### Usage +1. set up WiFi connection using `wifi.sta.config()` +2. upload the _ide.lua_ to your device +3. run it with `dofile("ide.lua")` +4. launch your web browser and open the IP address of your device diff --git a/WebIDE/test1/nodemcu-web-ide-master/ide.lua b/WebIDE/test1/nodemcu-web-ide-master/ide.lua new file mode 100644 index 0000000..e1e42d8 --- /dev/null +++ b/WebIDE/test1/nodemcu-web-ide-master/ide.lua @@ -0,0 +1,242 @@ +--[[ +XChip's NodeMCU IDE +Original Source: http://www.esp8266.com/viewtopic.php?f=19&t=1549 + +Petr Stehlik found the source in October 2016 and gave it a new home +at https://github.com/joysfera/nodemcu-web-ide under the GPL license. +Then updated it for new async socket send(), fixed, cleaned up, +added external editor with syntax highlighting and further improves it. + +Create, Edit and run NodeMCU files using your web browser. +Examples: +http:/// will list all the files in the MCU +http:///newfile.lua displays the file on your browser +http:///newfile.lua?edit allows to creates or edits the specified script in your browser +http:///newfile.lua?run it will run the specified script and will show the returned value +--]] + +local function editor(aceEnabled) -- feel free to disable the shiny Ajax.org Cloud Editor + local AceEnabled = aceEnabled == nil and true or aceEnabled + srv = net.createServer(net.TCP) + srv:listen(80, function(conn) + + local rnrn = 0 + local Status = 0 + local DataToGet = 0 + local method = "" + local url = "" + local vars = "" + + conn:on("receive", function(sck, payload) + + if Status == 0 then + _, _, method, url, vars = string.find(payload, "([A-Z]+) /([^?]*)%??(.*) HTTP") + -- print("Method, URL, vars: ", method, url, vars) + end + + if method == "POST" then + + if Status == 0 then + -- print("status", Status) + _, _, DataToGet, payload = string.find(payload, "Content%-Length: (%d+)(.+)") + if DataToGet then + DataToGet = tonumber(DataToGet) + -- print("DataToGet = "..DataToGet) + rnrn = 1 + Status = 1 + else + print("bad length") + end + end + + -- find /r/n/r/n + if Status == 1 then + -- print("status", Status) + local payloadlen = string.len(payload) + local mark = "\r\n\r\n" + local i + for i=1, payloadlen do + if string.byte(mark, rnrn) == string.byte(payload, i) then + rnrn = rnrn + 1 + if rnrn == 5 then + payload = string.sub(payload, i+1, payloadlen) + file.open(url, "w") + file.close() + Status = 2 + break + end + else + rnrn = 1 + end + end + if Status == 1 then + return + end + end + + if Status == 2 then + -- print("status", Status) + if payload then + DataToGet = DataToGet - string.len(payload) + --print("DataToGet:", DataToGet, "payload len:", string.len(payload)) + file.open(url, "a+") + file.write(payload) + file.close() + else + sck:send("HTTP/1.1 200 OK\r\n\r\nERROR") + Status = 0 + end + + if DataToGet == 0 then + sck:send("HTTP/1.1 200 OK\r\n\r\nOK") + Status = 0 + end + end + + return + end + -- end of POST method handling + + DataToGet = -1 + + if url == "favicon.ico" then + -- print("favicon.ico handler sends 404") + sck:send("HTTP/1.1 404 file not found") + return + end + + local sen = "HTTP/1.1 200 OK\r\n\r\n" + + -- it wants a file in particular + if url ~= "" and vars == "" then + DataToGet = 0 + sck:send(sen) + return + end + + sen = sen .. "

NodeMCU IDE

" + + if vars == "edit" then + if AceEnabled then + local mode = 'ace/mode/' + if url:match(".css") then mode = mode .. 'css' + elseif url:match(".html") then mode = mode .. 'html' + elseif url:match(".json") then mode = mode .. 'json' + elseif url:match(".js") then mode = mode .. 'javascript' + else mode = mode .. 'lua' + end + sen = sen .. "
" + .. "" + else + sen = sen .. "
" + .. "" + end + sen = sen .. " run " + + elseif vars == "run" then + sen = sen .. "" + + function s_output(str) sen = sen .. str end + node.output(s_output, 0) -- re-direct output to function s_output. + + local st, result = pcall(dofile, url) + + -- delay the output capture by 1000 milliseconds to give some time to the user routine in pcall() + tmr.alarm(0, 1000, tmr.ALARM_SINGLE, function() + node.output(nil) + if result then + local outp = tostring(result):sub(1,1300) -- to fit in one send() packet + result = nil + sen = sen .. "
Result of the run: " .. outp .. "
" + end + sen = sen .. "" + sck:send(sen) + end) + + return + + elseif vars == "compile" then + collectgarbage() + node.compile(url) + url = "" + + elseif vars == "delete" then + file.remove(url) + url = "" + + elseif vars == "restart" then + node.restart() + return + + end + + local message = {} + message[#message + 1] = sen + sen = nil + if url == "" then + local l = file.list(); + message[#message + 1] = "" + for k,v in pairs(l) do + local line = "" + message[#message + 1] = line + end + message[#message + 1] = "
NameSizeEditCompileDelete
" ..k.. "" ..v.. "" + local editable = k:sub(-4, -1) == ".lua" or k:sub(-4, -1) == ".css" or k:sub(-5, -1) == ".html" or k:sub(-5, -1) == ".json" + if editable then + line = line .. "edit" + end + line = line .. "" + if k:sub(-4, -1) == ".lua" then + line = line .. "compile" + end + line = line .. "delete
Create new     " + message[#message + 1] = "Restart" + end + message[#message + 1] = "" + + local function send_table(sk) + if #message > 0 then + sk:send(table.remove(message, 1)) + else + sk:close() + message = nil + end + end + sck:on("sent", send_table) + send_table(sck) + end) + + conn:on("sent", function(sck) + if DataToGet >= 0 and method == "GET" then + if file.open(url, "r") then + file.seek("set", DataToGet) + local chunkSize = 512 + local line = file.read(chunkSize) + file.close() + if line then + sck:send(line) + DataToGet = DataToGet + chunkSize + if string.len(line) == chunkSize then return end + end + end + end + + sck:close() + sck = nil + end) + end) +end + +if wifi.sta.status() == wifi.STA_GOTIP then + print("http://"..wifi.sta.getip().."/") + editor() +else + print("WiFi connecting...") + wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function() + wifi.eventmon.unregister(wifi.eventmon.STA_GOT_IP) + print("http://"..wifi.sta.getip().."/") + editor() + end) +end