mirror of
https://github.com/drasko/codezero.git
synced 2026-01-24 16:53:14 +01:00
Kernel updates since December 2009
This commit is contained in:
Bahadir Balban
@@ -150,7 +150,7 @@ cap_strings = { 'ipc' : \
|
||||
\t\t\t\t\tCAP_IRQCTRL_REGISTER,
|
||||
\t\t\t\t.start = __pfn(PLATFORM_${devname}_BASE),
|
||||
\t\t\t\t.end = __pfn(PLATFORM_${devname}_BASE + PLATFORM_${devname}_SIZE),
|
||||
\t\t\t\t.size = 1,
|
||||
\t\t\t\t.size = PLATFORM_${devname}_SIZE >> 12,
|
||||
\t\t\t\t.attr = (CAP_DEVTYPE_${devtype} & CAP_DEVTYPE_MASK)
|
||||
\t\t\t\t\t| ((${devnum} << CAP_DEVNUM_SHIFT) & CAP_DEVNUM_MASK),
|
||||
\t\t\t\t.irq = IRQ_${devname},
|
||||
|
||||
@@ -8,33 +8,42 @@ symbols
|
||||
ARCH_ARM 'ARM'
|
||||
|
||||
arm_cpu_type 'ARM Processor Type'
|
||||
CPU_ARM1136 'ARM1136 - To be added'
|
||||
CPU_ARM11MPCORE 'ARM11 MPCore - To be added'
|
||||
CPU_ARM1136 'ARM1136 - Experimental'
|
||||
CPU_ARM11MPCORE 'ARM11 MPCore - Experimental'
|
||||
CPU_ARM926 'ARM926EJ-S'
|
||||
CPU_CORTEXA8 'ARM Cortex-A8 - Not supported'
|
||||
|
||||
arm_subarch_type 'ARM Architecture Family'
|
||||
SUBARCH_V5 'ARM v5 Architecture'
|
||||
SUBARCH_V6 'ARM v6 Architecture, To be added'
|
||||
SUBARCH_V7 'ARM v7 Architecture, To be added'
|
||||
CPU_CORTEXA8 'ARM Cortex-A8'
|
||||
CPU_CORTEXA9 'ARM Cortex-A9'
|
||||
|
||||
arm_platform_type 'ARM Platform Type'
|
||||
PLATFORM_EB 'Realview EB Platform, Unsupported yet'
|
||||
PLATFORM_EB 'Realview EB Platform'
|
||||
PLATFORM_PBA8 'Realview PB-A8 Platform, To be added'
|
||||
PLATFORM_PB926 'Versatile PB926 Platform'
|
||||
PLATFORM_PB11MPCORE 'Realview PB11MPCore Platform'
|
||||
PLATFORM_BEAGLE 'OMAP3530/Cortex-A8 Beagle Board'
|
||||
PLATFORM_PBA9 'Realview Express Cortex-A9'
|
||||
|
||||
main_menu 'Codezero Microkernel Configurator'
|
||||
arm_menu 'ARM Architecture Configuration'
|
||||
arm_cpu_menu 'ARM CPU type'
|
||||
arm_platform_menu 'ARM Platform Type'
|
||||
processor_properties 'Generic Processor Properties'
|
||||
kernel_generic_options 'Generic Kernel Properties'
|
||||
toolchain_menu 'Toolchain Prefix'
|
||||
containers_menu 'Container Setup'
|
||||
arch_type 'Main architecture'
|
||||
|
||||
TOOLCHAIN_KERNEL 'Toolchain prefix for kernel'
|
||||
TOOLCHAIN_USER 'Toolchain prefix for userspace'
|
||||
SMP 'Enable SMP Support'
|
||||
NCPU 'Number of SMP CPUs'
|
||||
DEBUG_ACCOUNTING 'Enable system operations accounting'
|
||||
DEBUG_PERFMON 'Enable performance monitoring'
|
||||
DEBUG_PERFMON_USER 'Userspace access to perfmon registers (in-kernel measurements disabled)'
|
||||
DEBUG_SPINLOCKS 'Debug spinlocks, e.g. detect recursive locks, double unlocks'
|
||||
SCHED_TICKS 'Scheduler ticks per second'
|
||||
ICACHE_DISABLE 'Disable the L1 instruction cache'
|
||||
DCACHE_DISABLE 'Disable the L1 data cache'
|
||||
PREEMPT_DISABLE 'Disable Kernel Preemption'
|
||||
TOOLCHAIN 'Toolchain prefix for kernel'
|
||||
|
||||
CONTAINERS 'Number of containers'
|
||||
CAPABILITIES 'Enable capability checking'
|
||||
|
||||
#############
|
||||
@@ -45,17 +54,13 @@ choices arch_type
|
||||
ARCH_ARM
|
||||
default ARCH_ARM
|
||||
|
||||
choices arm_subarch_type
|
||||
SUBARCH_V5
|
||||
SUBARCH_V6
|
||||
SUBARCH_V7
|
||||
default SUBARCH_V5
|
||||
|
||||
|
||||
choices arm_platform_type
|
||||
PLATFORM_EB
|
||||
PLATFORM_PBA8
|
||||
PLATFORM_PB926
|
||||
PLATFORM_PB11MPCORE
|
||||
PLATFORM_BEAGLE
|
||||
PLATFORM_PBA9
|
||||
default PLATFORM_PB926
|
||||
|
||||
choices arm_cpu_type
|
||||
@@ -63,6 +68,7 @@ choices arm_cpu_type
|
||||
CPU_ARM1136
|
||||
CPU_ARM11MPCORE
|
||||
CPU_CORTEXA8
|
||||
CPU_CORTEXA9
|
||||
default CPU_ARM926
|
||||
|
||||
#############
|
||||
@@ -76,55 +82,119 @@ menu arm_platform_menu
|
||||
arm_platform_type
|
||||
|
||||
menu arm_menu
|
||||
arm_subarch_type
|
||||
arm_cpu_menu
|
||||
arm_platform_menu
|
||||
arm_cpu_menu
|
||||
|
||||
menu processor_properties
|
||||
SMP
|
||||
NCPU%
|
||||
ICACHE_DISABLE
|
||||
DCACHE_DISABLE
|
||||
|
||||
menu kernel_generic_options
|
||||
PREEMPT_DISABLE
|
||||
DEBUG_ACCOUNTING
|
||||
DEBUG_PERFMON
|
||||
DEBUG_PERFMON_USER
|
||||
DEBUG_SPINLOCKS
|
||||
SCHED_TICKS%
|
||||
|
||||
menu toolchain_menu
|
||||
TOOLCHAIN_KERNEL$
|
||||
TOOLCHAIN_USER$
|
||||
TOOLCHAIN$
|
||||
|
||||
menu main_menu
|
||||
arch_type
|
||||
arm_menu
|
||||
processor_properties
|
||||
kernel_generic_options
|
||||
toolchain_menu
|
||||
CONTAINERS%
|
||||
containers_menu
|
||||
|
||||
#############`
|
||||
#############
|
||||
# RULES #
|
||||
#############
|
||||
#Capability/Container rules:
|
||||
default CAPABILITIES from y
|
||||
default CONTAINERS from 1
|
||||
default DEBUG_ACCOUNTING from n
|
||||
default DEBUG_PERFMON from n
|
||||
default DEBUG_PERFMON_USER from n
|
||||
default DEBUG_SPINLOCKS from n
|
||||
default SCHED_TICKS from 1000
|
||||
derive DEBUG_PERFMON_KERNEL from DEBUG_PERFMON == y and DEBUG_PERFMON_USER != y
|
||||
|
||||
#Platform rules:
|
||||
unless SUBARCH_V5 suppress PLATFORM_PB926
|
||||
unless SUBARCH_V6 suppress PLATFORM_PB11MPCORE
|
||||
#Subarch Derivation Rules
|
||||
derive SUBARCH_V5 from CPU_ARM926
|
||||
|
||||
derive SUBARCH_V6 from CPU_ARM1136 or
|
||||
CPU_ARM11MPCORE
|
||||
|
||||
derive SUBARCH_V7 from CPU_CORTEXA8 or
|
||||
CPU_CORTEXA9
|
||||
|
||||
#CPU rules:
|
||||
unless SUBARCH_V5 suppress CPU_ARM926
|
||||
unless SUBARCH_V6 suppress CPU_ARM1136
|
||||
unless SUBARCH_V6 suppress CPU_ARM11MPCORE
|
||||
unless SUBARCH_V7 suppress CPU_CORTEXA8
|
||||
unless PLATFORM_PB926 suppress CPU_ARM926
|
||||
unless PLATFORM_PB11MPCORE or PLATFORM_EB suppress CPU_ARM11MPCORE
|
||||
unless PLATFORM_EB suppress CPU_ARM1136
|
||||
unless PLATFORM_PBA9 or PLATFORM_EB suppress CPU_CORTEXA9
|
||||
|
||||
unless PLATFORM_BEAGLE or
|
||||
PLATFORM_PBA8 or
|
||||
PLATFORM_EB suppress CPU_CORTEXA8
|
||||
|
||||
#SMP support rules
|
||||
unless CPU_CORTEXA9 or CPU_ARM11MPCORE suppress SMP
|
||||
unless CPU_CORTEXA9 or CPU_ARM11MPCORE suppress NCPU
|
||||
unless SMP suppress NCPU
|
||||
unless DEBUG_ACCOUNTING suppress DEBUG_PERFMON
|
||||
DEBUG_PERFMON_USER
|
||||
unless DEBUG_PERFMON suppress DEBUG_PERFMON_USER
|
||||
|
||||
# NOTE: Unlike menus, choices dont take { sym } model of visibility
|
||||
# dependencies. Instead, a choice symbol is declared in a menu, and
|
||||
# suppress statement is used to make sym visible, instead of a
|
||||
# { sym } model under the choices. (See manual for { sym } usage).
|
||||
|
||||
unless SUBARCH_V5 suppress PLATFORM_PB926
|
||||
unless ARCH_ARM suppress arm_menu
|
||||
unless PLATFORM_EB suppress CPU_ARM1136
|
||||
derive DRIVER_UART_PL011 from SUBARCH_V5 or SUBARCH_V6 or SUBARCH_V7
|
||||
derive DRIVER_TIMER_SP804 from SUBARCH_V5 or SUBARCH_V6 or SUBARCH_V7
|
||||
derive DRIVER_IRQ_PL190 from PLATFORM_PB926
|
||||
derive DRIVER_IRQ_GIC from PLATFORM_PB11MPCORE or PLATFORM_EB
|
||||
derive DRIVER_UART_PL011 from PLATFORM_PB926 or
|
||||
PLATFORM_PB11MPCORE or
|
||||
PLATFORM_PBA9 or
|
||||
PLATFORM_EB or
|
||||
PLATFORM_PBA8
|
||||
|
||||
derive DRIVER_TIMER_SP804 from PLATFORM_PB926 or
|
||||
PLATFORM_PB11MPCORE or
|
||||
PLATFORM_PBA9 or
|
||||
PLATFORM_EB or
|
||||
PLATFORM_PBA8
|
||||
|
||||
derive DRIVER_IRQ_PL190 from PLATFORM_PB926
|
||||
|
||||
derive DRIVER_IRQ_GIC from PLATFORM_PB11MPCORE or
|
||||
PLATFORM_PBA9 or
|
||||
PLATFORM_EB or
|
||||
PLATFORM_PBA8
|
||||
|
||||
derive DRIVER_UART_OMAP from PLATFORM_BEAGLE
|
||||
derive DRIVER_TIMER_OMAP from PLATFORM_BEAGLE
|
||||
derive DRIVER_INTC_OMAP from PLATFORM_BEAGLE
|
||||
|
||||
#SMP default value
|
||||
default SMP from y
|
||||
default NCPU from 4
|
||||
default ICACHE_DISABLE from n
|
||||
default DCACHE_DISABLE from n
|
||||
default PREEMPT_DISABLE from n
|
||||
|
||||
require NCPU <= 4
|
||||
|
||||
# Derive Ram base address depending on platform selected
|
||||
# we use this in setting containers physical regions
|
||||
# default values
|
||||
# FIXME: Find a better solution
|
||||
derive RAM_BASE_PLAT from PLATFORM_BEAGLE ? 0x80000000 : 0x00000000
|
||||
|
||||
# Toolchains:
|
||||
default TOOLCHAIN_KERNEL from 'arm-none-eabi-'
|
||||
default TOOLCHAIN_USER from 'arm-none-linux-gnueabi-'
|
||||
default TOOLCHAIN from 'arm-none-eabi-'
|
||||
|
||||
prefix CONFIG_
|
||||
|
||||
|
||||
@@ -4,6 +4,8 @@ CONT%(cn)d_TYPE_BAREMETAL 'Baremetal Container'
|
||||
CONT%(cn)d_TYPE_POSIX 'POSIX Container'
|
||||
CONT%(cn)d_OPT_NAME 'Container Name'
|
||||
|
||||
CONTAINERS 'Number of containers'
|
||||
|
||||
CONT%(cn)d_PHYSMEM_REGIONS 'Container %(cn)d Number of Physical Regions'
|
||||
CONT%(cn)d_PHYS0_START 'Container %(cn)d Physical Region 0 Start Address'
|
||||
CONT%(cn)d_PHYS0_END 'Container %(cn)d Physical Region 0 End Address'
|
||||
@@ -58,7 +60,7 @@ default CONT%(cn)d_LINUX_PAGE_OFFSET from CONT%(cn)d_VIRT0_START
|
||||
default CONT%(cn)d_LINUX_PHYS_OFFSET from CONT%(cn)d_PHYS0_START
|
||||
default CONT%(cn)d_LINUX_ROOTFS_ADDRESS from (CONT%(cn)d_LINUX_PHYS_OFFSET + 0x500000)
|
||||
|
||||
default CONT%(cn)d_VIRTMEM_REGIONS from 1
|
||||
default CONT%(cn)d_VIRTMEM_REGIONS from (CONT%(cn)d_TYPE_POSIX==y ? 4 : 1)
|
||||
default CONT%(cn)d_PHYSMEM_REGIONS from 1
|
||||
|
||||
# Define limits on virtual and physical memory regions of a _single_ container 0. Too much code!
|
||||
@@ -106,7 +108,7 @@ require CONT%(cn)d_PHYS3_START >= 0x40000
|
||||
require CONT%(cn)d_LINUX_ZRELADDR > CONT%(cn)d_LINUX_PHYS_OFFSET + 0x8000
|
||||
|
||||
# TODO: Do we want to check if PAGER_LMA/VMA lies in allocated memory regions
|
||||
default CONT%(cn)d_PHYS0_START from (%(cn)d == 0 ? 0x100000 : (0x100000 + %(cn)d * 0x1000000))
|
||||
default CONT%(cn)d_PHYS0_START from ((%(cn)d == 0 ? 0x100000 : (0x100000 + %(cn)d * 0x1000000)) + RAM_BASE_PLAT)
|
||||
default CONT%(cn)d_PHYS0_END from (CONT%(cn)d_PHYS0_START + 0xD00000)
|
||||
default CONT%(cn)d_PHYS1_START from CONT%(cn)d_PHYS0_END
|
||||
default CONT%(cn)d_PHYS1_END from (CONT%(cn)d_PHYS1_START + 0x100000)
|
||||
@@ -128,16 +130,14 @@ default CONT%(cn)d_VIRT4_END from (CONT%(cn)d_VIRT4_START + 0x10000000)
|
||||
default CONT%(cn)d_VIRT5_START from 0xe0000000
|
||||
default CONT%(cn)d_VIRT5_END from 0xf0000000
|
||||
|
||||
derive baremetal%(cn)d from
|
||||
(CONT%(cn)d_BAREMETAL_PROJ_EMPTY==y) ? "empty%(cn)d" :
|
||||
default CONT%(cn)d_OPT_NAME from
|
||||
(CONT%(cn)d_TYPE_LINUX==y) ? "linux%(cn)d" :
|
||||
((CONT%(cn)d_TYPE_POSIX==y) ? "posix%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_HELLO_WORLD==y) ? "hello_world%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_THREADS_DEMO==y) ? "thread_demo%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_TEST==y) ? "test%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_TEST_SUITE==y) ? "test_suite%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_UART_SERVICE==y) ? "uart_service%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_CLCD_SERVICE==y) ? "clcd_service%(cn)d" :
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_TIMER_SERVICE==y) ? "timer_service%(cn)d" : "baremetal_noname%(cn)d" ))))))
|
||||
|
||||
default CONT%(cn)d_OPT_NAME from (CONT%(cn)d_TYPE_LINUX==y) ? "linux%(cn)d" : ((CONT%(cn)d_TYPE_BAREMETAL==y) ? baremetal%(cn)d : "posix%(cn)d")
|
||||
((CONT%(cn)d_BAREMETAL_PROJ_TIMER_SERVICE==y) ? "timer_service%(cn)d" : "empty%(cn)d"))))))
|
||||
|
||||
when CONT%(cn)d_TYPE_LINUX==y suppress cont%(cn)d_default_pager_params
|
||||
unless CONT%(cn)d_TYPE_POSIX==y suppress cont%(cn)d_posix_pager_params
|
||||
@@ -165,19 +165,17 @@ cont%(cn)d_baremetal_params 'Baremetal Project'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_EMPTY 'Empty Project'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_HELLO_WORLD 'Hello World'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_THREADS_DEMO 'Thread Library Demo'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_TEST 'Test Project'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_TEST_SUITE 'Microkernel Tests'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_UART_SERVICE 'UART Service'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_TIMER_SERVICE 'Timer Service'
|
||||
CONT%(cn)d_BAREMETAL_PROJ_CLCD_SERVICE 'CLCD Service'
|
||||
|
||||
choices cont%(cn)d_baremetal_params
|
||||
CONT%(cn)d_BAREMETAL_PROJ_EMPTY
|
||||
CONT%(cn)d_BAREMETAL_PROJ_HELLO_WORLD
|
||||
CONT%(cn)d_BAREMETAL_PROJ_THREADS_DEMO
|
||||
CONT%(cn)d_BAREMETAL_PROJ_TEST
|
||||
CONT%(cn)d_BAREMETAL_PROJ_TEST_SUITE
|
||||
CONT%(cn)d_BAREMETAL_PROJ_UART_SERVICE
|
||||
CONT%(cn)d_BAREMETAL_PROJ_TIMER_SERVICE
|
||||
CONT%(cn)d_BAREMETAL_PROJ_CLCD_SERVICE
|
||||
default CONT%(cn)d_BAREMETAL_PROJ_EMPTY
|
||||
|
||||
menu cont%(cn)d_default_pager_params
|
||||
@@ -234,19 +232,16 @@ cont%(cn)d_cap_device_uart1 'Container %(cn)d UART1 Menu'
|
||||
cont%(cn)d_cap_device_uart2 'Container %(cn)d UART2 Menu'
|
||||
cont%(cn)d_cap_device_uart3 'Container %(cn)d UART3 Menu'
|
||||
cont%(cn)d_cap_device_timer1 'Container %(cn)d TIMER23 Menu'
|
||||
cont%(cn)d_cap_device_clcd 'Container %(cn)d CLCD Menu'
|
||||
|
||||
CONT%(cn)d_CAP_DEVICE_UART1_USE 'Container %(cn)d UART1 Enable'
|
||||
CONT%(cn)d_CAP_DEVICE_UART2_USE 'Container %(cn)d UART2 Enable'
|
||||
CONT%(cn)d_CAP_DEVICE_UART3_USE 'Container %(cn)d UART3 Enable'
|
||||
CONT%(cn)d_CAP_DEVICE_TIMER1_USE 'Container %(cn)d TIMER23 Enable'
|
||||
CONT%(cn)d_CAP_DEVICE_CLCD0_USE 'Container %(cn)d CLCD Enable'
|
||||
|
||||
default CONT%(cn)d_CAP_DEVICE_UART1_USE from n
|
||||
default CONT%(cn)d_CAP_DEVICE_UART2_USE from n
|
||||
default CONT%(cn)d_CAP_DEVICE_UART3_USE from n
|
||||
default CONT%(cn)d_CAP_DEVICE_TIMER1_USE from n
|
||||
default CONT%(cn)d_CAP_DEVICE_CLCD0_USE from n
|
||||
|
||||
menu cont%(cn)d_cap_device_uart1
|
||||
CONT%(cn)d_CAP_DEVICE_UART1_USE
|
||||
@@ -260,15 +255,11 @@ menu cont%(cn)d_cap_device_uart3
|
||||
menu cont%(cn)d_cap_device_timer1
|
||||
CONT%(cn)d_CAP_DEVICE_TIMER1_USE
|
||||
|
||||
menu cont%(cn)d_cap_device_clcd
|
||||
CONT%(cn)d_CAP_DEVICE_CLCD0_USE
|
||||
|
||||
menu cont%(cn)d_device_list
|
||||
cont%(cn)d_cap_device_uart1
|
||||
cont%(cn)d_cap_device_uart2
|
||||
cont%(cn)d_cap_device_uart3
|
||||
cont%(cn)d_cap_device_timer1
|
||||
cont%(cn)d_cap_device_clcd
|
||||
|
||||
#
|
||||
# Settings for Custom Capabilities
|
||||
|
||||
302
config/cml/examples/beagle/hello-world.cml
Normal file
302
config/cml/examples/beagle/hello-world.cml
Normal file
@@ -0,0 +1,302 @@
|
||||
#
|
||||
# Automatically generated, don't edit
|
||||
#
|
||||
# Generated on: amit-laptop
|
||||
# At: Tue, 23 Feb 2010 17:03:17 +0000
|
||||
# Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
|
||||
|
||||
#
|
||||
# Codezero Microkernel Configurator
|
||||
#
|
||||
|
||||
#
|
||||
# Main architecture
|
||||
#
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
|
||||
#
|
||||
# ARM Architecture Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
CONFIG_PLATFORM_EB=n
|
||||
CONFIG_PLATFORM_PBA8=n
|
||||
CONFIG_PLATFORM_PB926=n
|
||||
CONFIG_PLATFORM_PB11MPCORE=n
|
||||
CONFIG_PLATFORM_BEAGLE=y
|
||||
CONFIG_PLATFORM_PBA9=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# ARM CPU type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Processor Type
|
||||
#
|
||||
CONFIG_CPU_CORTEXA8=y
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Generic Processor Properties
|
||||
#
|
||||
CONFIG_ICACHE_DISABLE=n
|
||||
CONFIG_DCACHE_DISABLE=n
|
||||
|
||||
|
||||
#
|
||||
# Generic Kernel Properties
|
||||
#
|
||||
CONFIG_PREEMPT_DISABLE=n
|
||||
CONFIG_DEBUG_ACCOUNTING=y
|
||||
CONFIG_DEBUG_PERFMON=n
|
||||
|
||||
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
|
||||
#
|
||||
# Container Setup
|
||||
#
|
||||
CONFIG_CAPABILITIES=y
|
||||
CONFIG_CONTAINERS=1
|
||||
|
||||
#
|
||||
# Container 0 Parameters
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Type
|
||||
#
|
||||
CONFIG_CONT0_TYPE_BAREMETAL=y
|
||||
CONFIG_CONT0_TYPE_POSIX=n
|
||||
CONFIG_CONT0_TYPE_LINUX=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Options
|
||||
#
|
||||
CONFIG_CONT0_OPT_NAME="hello_world0"
|
||||
|
||||
#
|
||||
# Baremetal Project
|
||||
#
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_EMPTY=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_HELLO_WORLD=y
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_THREADS_DEMO=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_TEST_SUITE=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_UART_SERVICE=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_TIMER_SERVICE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Default Pager Parameters
|
||||
#
|
||||
CONFIG_CONT0_PAGER_LMA=0x80100000
|
||||
CONFIG_CONT0_PAGER_VMA=0xa0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Physical Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_PHYSMEM_REGIONS=1
|
||||
CONFIG_CONT0_PHYS0_START=0x80100000
|
||||
CONFIG_CONT0_PHYS0_END=0x80e00000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Virtual Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_VIRTMEM_REGIONS=1
|
||||
CONFIG_CONT0_VIRT0_START=0xa0000000
|
||||
CONFIG_CONT0_VIRT0_END=0xb0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability List
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Thread Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_THREADPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_THREADPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Space Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Mutex Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_SIZE=100
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Map Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MAPPOOL_SIZE=800
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPPOOL_SIZE=32
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Thread Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_TCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Exchange Registers Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_EXREGS_USE=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IPC Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IPC_USE=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_PAGER_SPACE=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_CONTAINER=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_PAGER=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Userspace Mutex Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_UMUTEX_USE=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IRQ Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IRQCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 0 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM0_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 1 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 2 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 3 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM3_USE=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Devices (Capabilities)
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 UART1 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART2 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART3 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART3_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 TIMER23 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_TIMER1_USE=n
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Derived symbols
|
||||
#
|
||||
CONFIG_DEBUG_PERFMON_KERNEL=n
|
||||
CONFIG_CONT1_PAGER_LOAD_ADDR=0x81100000
|
||||
CONFIG_DRIVER_IRQ_PL190=n
|
||||
CONFIG_DRIVER_TIMER_SP804=n
|
||||
CONFIG_CONT2_START_PC_ADDR=0xc0000000
|
||||
CONFIG_CONT3_START_PC_ADDR=0xd0000000
|
||||
CONFIG_DRIVER_IRQ_GIC=n
|
||||
CONFIG_CONT2_PAGER_VIRT_ADDR=0xc0000000
|
||||
CONFIG_RAM_BASE_PLAT=2147483648
|
||||
CONFIG_DRIVER_INTC_OMAP=y
|
||||
CONFIG_CONT2_PAGER_LOAD_ADDR=0x82100000
|
||||
CONFIG_CONT1_PAGER_VIRT_ADDR=0xb0000000
|
||||
CONFIG_CONT3_PAGER_LOAD_ADDR=0x83100000
|
||||
CONFIG_SUBARCH_V5=n
|
||||
CONFIG_SUBARCH_V7=y
|
||||
CONFIG_SUBARCH_V6=n
|
||||
CONFIG_DRIVER_TIMER_OMAP=y
|
||||
CONFIG_CONT0_PAGER_LOAD_ADDR=0x80100000
|
||||
CONFIG_CONT0_PAGER_VIRT_ADDR=0xa0000000
|
||||
CONFIG_DRIVER_UART_OMAP=y
|
||||
CONFIG_DRIVER_UART_PL011=n
|
||||
CONFIG_CONT3_PAGER_VIRT_ADDR=0xd0000000
|
||||
CONFIG_CONT0_START_PC_ADDR=0xa0000000
|
||||
CONFIG_CONT1_START_PC_ADDR=0xb0000000
|
||||
#
|
||||
# That's all, folks!
|
||||
@@ -54,8 +54,7 @@ CONFIG_PLATFORM_PB926=y
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN_KERNEL="arm-none-eabi-"
|
||||
CONFIG_TOOLCHAIN_USER="arm-none-linux-gnueabi-"
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
CONFIG_CONTAINERS=1
|
||||
|
||||
|
||||
292
config/cml/examples/linux/beagle/config.cml
Normal file
292
config/cml/examples/linux/beagle/config.cml
Normal file
@@ -0,0 +1,292 @@
|
||||
#
|
||||
# Automatically generated, don't edit
|
||||
#
|
||||
# Generated on: amit-laptop
|
||||
# At: Wed, 03 Mar 2010 21:07:44 +0000
|
||||
# Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
|
||||
|
||||
#
|
||||
# Codezero Microkernel Configurator
|
||||
#
|
||||
|
||||
#
|
||||
# Main architecture
|
||||
#
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
|
||||
#
|
||||
# ARM Architecture Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
CONFIG_PLATFORM_EB=n
|
||||
CONFIG_PLATFORM_PBA8=n
|
||||
CONFIG_PLATFORM_PB926=n
|
||||
CONFIG_PLATFORM_PB11MPCORE=n
|
||||
CONFIG_PLATFORM_BEAGLE=y
|
||||
CONFIG_PLATFORM_PBA9=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# ARM CPU type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Processor Type
|
||||
#
|
||||
CONFIG_CPU_CORTEXA8=y
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Generic Processor Properties
|
||||
#
|
||||
CONFIG_ICACHE_DISABLE=n
|
||||
CONFIG_DCACHE_DISABLE=n
|
||||
|
||||
|
||||
#
|
||||
# Generic Kernel Properties
|
||||
#
|
||||
CONFIG_PREEMPT_DISABLE=n
|
||||
CONFIG_DEBUG_ACCOUNTING=n
|
||||
|
||||
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
|
||||
#
|
||||
# Container Setup
|
||||
#
|
||||
CONFIG_CAPABILITIES=y
|
||||
CONFIG_CONTAINERS=1
|
||||
|
||||
#
|
||||
# Container 0 Parameters
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Type
|
||||
#
|
||||
CONFIG_CONT0_TYPE_BAREMETAL=n
|
||||
CONFIG_CONT0_TYPE_POSIX=n
|
||||
CONFIG_CONT0_TYPE_LINUX=y
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Options
|
||||
#
|
||||
CONFIG_CONT0_OPT_NAME="linux0"
|
||||
|
||||
#
|
||||
# Container 0 Linux Pager Parameters
|
||||
#
|
||||
CONFIG_CONT0_LINUX_PHYS_OFFSET=0x80200000
|
||||
CONFIG_CONT0_LINUX_ZRELADDR=0x80208000
|
||||
CONFIG_CONT0_LINUX_ROOTFS_ADDRESS=0x80700000
|
||||
CONFIG_CONT0_LINUX_PAGE_OFFSET=0xa0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Physical Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_PHYSMEM_REGIONS=1
|
||||
CONFIG_CONT0_PHYS0_START=0x80200000
|
||||
CONFIG_CONT0_PHYS0_END=0x80f00000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Virtual Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_VIRTMEM_REGIONS=1
|
||||
CONFIG_CONT0_VIRT0_START=0xa0000000
|
||||
CONFIG_CONT0_VIRT0_END=0xb0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability List
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Thread Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_THREADPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_THREADPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Space Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Mutex Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_SIZE=100
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Map Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MAPPOOL_SIZE=800
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPPOOL_SIZE=32
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Thread Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_TCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Exchange Registers Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_EXREGS_USE=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IPC Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IPC_USE=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_PAGER_SPACE=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_CONTAINER=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_PAGER=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Userspace Mutex Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_UMUTEX_USE=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IRQ Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IRQCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 0 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM0_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 1 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 2 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 3 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM3_USE=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Devices (Capabilities)
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 UART1 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART2 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART3 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART3_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 TIMER23 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_TIMER1_USE=n
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Derived symbols
|
||||
#
|
||||
CONFIG_DEBUG_PERFMON_KERNEL=n
|
||||
CONFIG_CONT1_PAGER_LOAD_ADDR=0x81100000
|
||||
CONFIG_DRIVER_IRQ_PL190=n
|
||||
CONFIG_DRIVER_TIMER_SP804=n
|
||||
CONFIG_CONT2_START_PC_ADDR=0xc0000000
|
||||
CONFIG_CONT3_START_PC_ADDR=0xd0000000
|
||||
CONFIG_DRIVER_IRQ_GIC=n
|
||||
CONFIG_CONT2_PAGER_VIRT_ADDR=0xc0000000
|
||||
CONFIG_RAM_BASE_PLAT=2147483648
|
||||
CONFIG_DRIVER_INTC_OMAP=y
|
||||
CONFIG_CONT2_PAGER_LOAD_ADDR=0x82100000
|
||||
CONFIG_CONT1_PAGER_VIRT_ADDR=0xb0000000
|
||||
CONFIG_CONT3_PAGER_LOAD_ADDR=0x83100000
|
||||
CONFIG_SUBARCH_V5=n
|
||||
CONFIG_SUBARCH_V7=y
|
||||
CONFIG_SUBARCH_V6=n
|
||||
CONFIG_DRIVER_TIMER_OMAP=y
|
||||
CONFIG_CONT0_PAGER_LOAD_ADDR=0x80200000
|
||||
CONFIG_CONT0_PAGER_VIRT_ADDR=0xa0000000
|
||||
CONFIG_DRIVER_UART_OMAP=y
|
||||
CONFIG_DRIVER_UART_PL011=n
|
||||
CONFIG_CONT3_PAGER_VIRT_ADDR=0xd0000000
|
||||
CONFIG_CONT0_START_PC_ADDR=0xa0008000
|
||||
CONFIG_CONT1_START_PC_ADDR=0xb0000000
|
||||
#
|
||||
# That's all, folks!
|
||||
292
config/cml/examples/linux/pb926/config.cml
Normal file
292
config/cml/examples/linux/pb926/config.cml
Normal file
@@ -0,0 +1,292 @@
|
||||
#
|
||||
# Automatically generated, don't edit
|
||||
#
|
||||
# Generated on: amit-laptop
|
||||
# At: Wed, 03 Mar 2010 08:42:40 +0000
|
||||
# Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
|
||||
|
||||
#
|
||||
# Codezero Microkernel Configurator
|
||||
#
|
||||
|
||||
#
|
||||
# Main architecture
|
||||
#
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
|
||||
#
|
||||
# ARM Architecture Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
CONFIG_PLATFORM_EB=n
|
||||
CONFIG_PLATFORM_PBA8=n
|
||||
CONFIG_PLATFORM_PB926=y
|
||||
CONFIG_PLATFORM_PB11MPCORE=n
|
||||
CONFIG_PLATFORM_BEAGLE=n
|
||||
CONFIG_PLATFORM_PBA9=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# ARM CPU type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Processor Type
|
||||
#
|
||||
CONFIG_CPU_ARM926=y
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Generic Processor Properties
|
||||
#
|
||||
CONFIG_ICACHE_DISABLE=n
|
||||
CONFIG_DCACHE_DISABLE=n
|
||||
|
||||
|
||||
#
|
||||
# Generic Kernel Properties
|
||||
#
|
||||
CONFIG_PREEMPT_DISABLE=n
|
||||
CONFIG_DEBUG_ACCOUNTING=n
|
||||
|
||||
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
|
||||
#
|
||||
# Container Setup
|
||||
#
|
||||
CONFIG_CAPABILITIES=y
|
||||
CONFIG_CONTAINERS=1
|
||||
|
||||
#
|
||||
# Container 0 Parameters
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Type
|
||||
#
|
||||
CONFIG_CONT0_TYPE_BAREMETAL=n
|
||||
CONFIG_CONT0_TYPE_POSIX=n
|
||||
CONFIG_CONT0_TYPE_LINUX=y
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Options
|
||||
#
|
||||
CONFIG_CONT0_OPT_NAME="linux0"
|
||||
|
||||
#
|
||||
# Container 0 Linux Pager Parameters
|
||||
#
|
||||
CONFIG_CONT0_LINUX_PHYS_OFFSET=0x200000
|
||||
CONFIG_CONT0_LINUX_ZRELADDR=0x208000
|
||||
CONFIG_CONT0_LINUX_ROOTFS_ADDRESS=0x700000
|
||||
CONFIG_CONT0_LINUX_PAGE_OFFSET=0xa0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Physical Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_PHYSMEM_REGIONS=1
|
||||
CONFIG_CONT0_PHYS0_START=0x200000
|
||||
CONFIG_CONT0_PHYS0_END=0xf00000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Virtual Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_VIRTMEM_REGIONS=1
|
||||
CONFIG_CONT0_VIRT0_START=0xa0000000
|
||||
CONFIG_CONT0_VIRT0_END=0xb0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability List
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Thread Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_THREADPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_THREADPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Space Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Mutex Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_SIZE=100
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Map Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MAPPOOL_SIZE=800
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPPOOL_SIZE=32
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Thread Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_TCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Exchange Registers Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_EXREGS_USE=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IPC Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IPC_USE=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_PAGER_SPACE=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_CONTAINER=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_PAGER=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Userspace Mutex Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_UMUTEX_USE=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IRQ Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IRQCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 0 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM0_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 1 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 2 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 3 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM3_USE=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Devices (Capabilities)
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 UART1 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART2 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART3 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART3_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 TIMER23 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_TIMER1_USE=n
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Derived symbols
|
||||
#
|
||||
CONFIG_DEBUG_PERFMON_KERNEL=n
|
||||
CONFIG_CONT1_PAGER_LOAD_ADDR=0x1100000
|
||||
CONFIG_DRIVER_IRQ_PL190=y
|
||||
CONFIG_DRIVER_TIMER_SP804=y
|
||||
CONFIG_CONT2_START_PC_ADDR=0xc0000000
|
||||
CONFIG_CONT3_START_PC_ADDR=0xd0000000
|
||||
CONFIG_DRIVER_IRQ_GIC=n
|
||||
CONFIG_CONT2_PAGER_VIRT_ADDR=0xc0000000
|
||||
CONFIG_RAM_BASE_PLAT=0
|
||||
CONFIG_DRIVER_INTC_OMAP=n
|
||||
CONFIG_CONT2_PAGER_LOAD_ADDR=0x2100000
|
||||
CONFIG_CONT1_PAGER_VIRT_ADDR=0xb0000000
|
||||
CONFIG_CONT3_PAGER_LOAD_ADDR=0x3100000
|
||||
CONFIG_SUBARCH_V5=y
|
||||
CONFIG_SUBARCH_V7=n
|
||||
CONFIG_SUBARCH_V6=n
|
||||
CONFIG_DRIVER_TIMER_OMAP=n
|
||||
CONFIG_CONT0_PAGER_LOAD_ADDR=0x200000
|
||||
CONFIG_CONT0_PAGER_VIRT_ADDR=0xa0000000
|
||||
CONFIG_DRIVER_UART_OMAP=n
|
||||
CONFIG_DRIVER_UART_PL011=y
|
||||
CONFIG_CONT3_PAGER_VIRT_ADDR=0xd0000000
|
||||
CONFIG_CONT0_START_PC_ADDR=0xa0008000
|
||||
CONFIG_CONT1_START_PC_ADDR=0xb0000000
|
||||
#
|
||||
# That's all, folks!
|
||||
@@ -54,8 +54,7 @@ CONFIG_PLATFORM_PB926=y
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN_KERNEL="arm-none-eabi-"
|
||||
CONFIG_TOOLCHAIN_USER="arm-none-linux-gnueabi-"
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
CONFIG_CONTAINERS=1
|
||||
|
||||
|
||||
@@ -54,8 +54,7 @@ CONFIG_PLATFORM_PB926=y
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN_KERNEL="arm-none-eabi-"
|
||||
CONFIG_TOOLCHAIN_USER="arm-none-linux-gnueabi-"
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
CONFIG_CONTAINERS=2
|
||||
|
||||
|
||||
302
config/cml/examples/vxa9/config.cml
Normal file
302
config/cml/examples/vxa9/config.cml
Normal file
@@ -0,0 +1,302 @@
|
||||
#
|
||||
# Automatically generated, don't edit
|
||||
#
|
||||
# Generated on: bahadir-laptop
|
||||
# At: Thu, 25 Feb 2010 16:06:59 +0000
|
||||
# Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010
|
||||
|
||||
#
|
||||
# Codezero Microkernel Configurator
|
||||
#
|
||||
|
||||
#
|
||||
# Main architecture
|
||||
#
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
|
||||
#
|
||||
# ARM Architecture Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Platform Type
|
||||
#
|
||||
CONFIG_PLATFORM_EB=n
|
||||
CONFIG_PLATFORM_PBA8=n
|
||||
CONFIG_PLATFORM_PB926=n
|
||||
CONFIG_PLATFORM_PB11MPCORE=n
|
||||
CONFIG_PLATFORM_BEAGLE=n
|
||||
CONFIG_PLATFORM_PBA9=y
|
||||
|
||||
|
||||
|
||||
#
|
||||
# ARM CPU type
|
||||
#
|
||||
|
||||
#
|
||||
# ARM Processor Type
|
||||
#
|
||||
CONFIG_CPU_CORTEXA9=y
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Generic Processor Properties
|
||||
#
|
||||
CONFIG_SMP=n
|
||||
CONFIG_ICACHE_DISABLE=n
|
||||
CONFIG_DCACHE_DISABLE=n
|
||||
|
||||
|
||||
#
|
||||
# Generic Kernel Properties
|
||||
#
|
||||
CONFIG_PREEMPT_DISABLE=n
|
||||
CONFIG_DEBUG_ACCOUNTING=y
|
||||
CONFIG_DEBUG_PERFMON=y
|
||||
CONFIG_DEBUG_PERFMON_USER=y
|
||||
|
||||
|
||||
#
|
||||
# Toolchain Prefix
|
||||
#
|
||||
CONFIG_TOOLCHAIN="arm-none-eabi-"
|
||||
|
||||
CONFIG_CONTAINERS=1
|
||||
|
||||
#
|
||||
# Container Setup
|
||||
#
|
||||
CONFIG_CAPABILITIES=y
|
||||
|
||||
#
|
||||
# Container 0 Parameters
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Type
|
||||
#
|
||||
CONFIG_CONT0_TYPE_BAREMETAL=y
|
||||
CONFIG_CONT0_TYPE_POSIX=n
|
||||
CONFIG_CONT0_TYPE_LINUX=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Options
|
||||
#
|
||||
CONFIG_CONT0_OPT_NAME="test_suite0"
|
||||
|
||||
#
|
||||
# Baremetal Project
|
||||
#
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_EMPTY=y
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_HELLO_WORLD=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_THREADS_DEMO=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_TEST_SUITE=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_UART_SERVICE=n
|
||||
CONFIG_CONT0_BAREMETAL_PROJ_TIMER_SERVICE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Default Pager Parameters
|
||||
#
|
||||
CONFIG_CONT0_PAGER_LMA=0x100000
|
||||
CONFIG_CONT0_PAGER_VMA=0xa0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Physical Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_PHYSMEM_REGIONS=1
|
||||
CONFIG_CONT0_PHYS0_START=0x100000
|
||||
CONFIG_CONT0_PHYS0_END=0xe00000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Virtual Memory Regions (Capabilities)
|
||||
#
|
||||
CONFIG_CONT0_VIRTMEM_REGIONS=1
|
||||
CONFIG_CONT0_VIRT0_START=0xa0000000
|
||||
CONFIG_CONT0_VIRT0_END=0xb0000000
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability List
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 Thread Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_THREADPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_THREADPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Space Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_SPACEPOOL_SIZE=64
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Mutex Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MUTEXPOOL_SIZE=100
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Map Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_MAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_MAPPOOL_SIZE=800
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Pool Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPPOOL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPPOOL_SIZE=32
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Thread Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_TCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_TCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Exchange Registers Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_EXREGS_USE=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_EXREGS_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IPC Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IPC_USE=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_CURRENT_PAGER_SPACE=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_CONTAINER=n
|
||||
CONFIG_CONT0_CAP_IPC_TARGET_ANOTHER_PAGER=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Capability Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_CAPCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_CAPCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Userspace Mutex Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_UMUTEX_USE=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_UMUTEX_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 IRQ Control Capability
|
||||
#
|
||||
CONFIG_CONT0_CAP_IRQCTRL_USE=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_CONTAINER=y
|
||||
CONFIG_CONT0_CAP_IRQCTRL_TARGET_CURRENT_PAGER_SPACE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 0 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM0_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 1 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 2 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Custom Capability 3 Parameters
|
||||
#
|
||||
CONFIG_CONT0_CAP_CUSTOM3_USE=n
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Container 0 Devices (Capabilities)
|
||||
#
|
||||
|
||||
#
|
||||
# Container 0 UART1 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART1_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART2 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART2_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 UART3 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_UART3_USE=n
|
||||
|
||||
|
||||
#
|
||||
# Container 0 TIMER23 Menu
|
||||
#
|
||||
CONFIG_CONT0_CAP_DEVICE_TIMER1_USE=y
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Derived symbols
|
||||
#
|
||||
CONFIG_DEBUG_PERFMON_KERNEL=n
|
||||
CONFIG_CONT1_PAGER_LOAD_ADDR=0x1100000
|
||||
CONFIG_DRIVER_IRQ_PL190=n
|
||||
CONFIG_DRIVER_TIMER_SP804=y
|
||||
CONFIG_CONT2_START_PC_ADDR=0xc0000000
|
||||
CONFIG_CONT3_START_PC_ADDR=0xd0000000
|
||||
CONFIG_DRIVER_IRQ_GIC=y
|
||||
CONFIG_CONT2_PAGER_VIRT_ADDR=0xc0000000
|
||||
CONFIG_CONT2_PAGER_LOAD_ADDR=0x2100000
|
||||
CONFIG_CONT1_PAGER_VIRT_ADDR=0xb0000000
|
||||
CONFIG_CONT3_PAGER_LOAD_ADDR=0x3100000
|
||||
CONFIG_SUBARCH_V5=n
|
||||
CONFIG_SUBARCH_V7=y
|
||||
CONFIG_SUBARCH_V6=n
|
||||
CONFIG_DRIVER_TIMER_OMAP=n
|
||||
CONFIG_CONT0_PAGER_LOAD_ADDR=0x100000
|
||||
CONFIG_CONT0_PAGER_VIRT_ADDR=0xa0000000
|
||||
CONFIG_DRIVER_UART_OMAP=n
|
||||
CONFIG_DRIVER_UART_PL011=y
|
||||
CONFIG_CONT3_PAGER_VIRT_ADDR=0xd0000000
|
||||
CONFIG_CONT0_START_PC_ADDR=0xa0000000
|
||||
CONFIG_CONT1_START_PC_ADDR=0xb0000000
|
||||
#
|
||||
# That's all, folks!
|
||||
@@ -55,19 +55,21 @@ class Container:
|
||||
class configuration:
|
||||
|
||||
def __init__(self):
|
||||
# Mapping between platform selected and gcc flags for it
|
||||
self.cpu_to_gcc_flag = (['ARM926', 'arm926ej-s'],
|
||||
['CORTEXA8', 'cortex-a8'],
|
||||
['ARM11MPCORE', 'mpcore'],
|
||||
['ARM1136', 'arm1136jf-s'],
|
||||
['ARM1176', 'arm1176jz-s'],)
|
||||
# Mapping between cpu and gcc flags for it.
|
||||
# Optimized solution to derive gcc arch flag from cpu
|
||||
# gcc flag here is "-march"
|
||||
# cpu -march flag
|
||||
self.arch_to_gcc_flag = (['ARM926', 'armv5'],
|
||||
['ARM1136', 'armv6'],
|
||||
['ARM11MPCORE', 'armv6k'],
|
||||
['CORTEXA8', 'armv7-a'],
|
||||
['CORTEXA9', 'armv7-a'])
|
||||
self.arch = None
|
||||
self.subarch = None
|
||||
self.platform = None
|
||||
self.cpu = None
|
||||
self.gcc_cpu_flag = None
|
||||
self.user_toolchain = None
|
||||
self.kernel_toolchain = None
|
||||
self.gcc_arch_flag = None
|
||||
self.toolchain = None
|
||||
self.all = []
|
||||
self.containers = []
|
||||
self.ncontainers = 0
|
||||
@@ -102,26 +104,22 @@ class configuration:
|
||||
parts = name.split("_", 3)
|
||||
self.platform = parts[2].lower()
|
||||
|
||||
# Extract cpu and its gcc flag from a name value pair
|
||||
# Extract cpu from a name value pair
|
||||
def get_cpu(self, name, val):
|
||||
if name[:len("CONFIG_CPU_")] == "CONFIG_CPU_":
|
||||
parts = name.split("_", 3)
|
||||
self.cpu = parts[2].lower()
|
||||
for cputype, cpuflag in self.cpu_to_gcc_flag:
|
||||
if parts[2] == cputype:
|
||||
self.gcc_cpu_flag = cpuflag
|
||||
|
||||
# derive gcc "-march" flag
|
||||
for cputype, archflag in self.arch_to_gcc_flag:
|
||||
if cputype == parts[2]:
|
||||
self.gcc_arch_flag = archflag
|
||||
|
||||
# Extract kernel space toolchain from a name value pair
|
||||
def get_toolchain_kernel(self, name, val):
|
||||
if name[:len("CONFIG_TOOLCHAIN_KERNEL")] == "CONFIG_TOOLCHAIN_KERNEL":
|
||||
parts = val.split("\"", 3)
|
||||
self.kernel_toolchain = parts[1]
|
||||
|
||||
# Extract user space toolchain from a name value pair
|
||||
def get_toolchain_user(self, name, val):
|
||||
if name[:len("CONFIG_TOOLCHAIN_USER")] == "CONFIG_TOOLCHAIN_USER":
|
||||
parts = val.split("\"", 3)
|
||||
self.user_toolchain = parts[1]
|
||||
def get_toolchain(self, name, val):
|
||||
if name[:len("CONFIG_TOOLCHAIN")] == "CONFIG_TOOLCHAIN":
|
||||
parts = val.split("\"", 2)
|
||||
self.toolchain = parts[1]
|
||||
|
||||
# Extract number of containers
|
||||
def get_ncontainers(self, name, val):
|
||||
|
||||
@@ -23,7 +23,7 @@ CONFIG_SHELVE_FILENAME = "configuration"
|
||||
CONFIG_SHELVE = join(CONFIG_SHELVE_DIR, CONFIG_SHELVE_FILENAME)
|
||||
KERNEL_CINFO_PATH = join(PROJROOT, "src/generic/cinfo.c")
|
||||
LINUXDIR = join(PROJROOT, 'conts/linux')
|
||||
LINUX_KERNELDIR = join(LINUXDIR, 'linux-2.6.28.10')
|
||||
LINUX_KERNELDIR = join(LINUXDIR, 'linux-2.6.33')
|
||||
LINUX_ROOTFSDIR = join(LINUXDIR, 'rootfs')
|
||||
LINUX_ATAGSDIR = join(LINUXDIR, 'atags')
|
||||
|
||||
|
||||
Reference in New Issue
Block a user