sambuc/raspberrypi
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

updated README files for armjtag to inlude a full description of how to use the FT2232H Mini-Module. Also modified the OpenOCD configuration script for RPi2, which should work correctly now

Browse Source
This commit is contained in:
Didrik Lundberg
2015-07-03 18:34:25 +02:00
parent 53de6846e3
commit b388bd5b27
3 changed files with 65 additions and 43 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
armjtag/README
View File

@@ -150,16 +150,6 @@ that sells FTDI parts might also sell FTDI boards.
FT2232H Mini Module:
TODO when I get one, I assume it is very very similar if not the same
as the FT4232H below, the pinout should be the same I am using the A
and B sections of the chip so those match, the board pinouts may or
may not match the FT4232H board. Not hard to figure out from the
FTDI documents though.
FT4232H Mini Module: FT4232H Mini Module:
Searching for this you get the datasheet for the development board. You Searching for this you get the datasheet for the development board. You
@@ -290,7 +280,27 @@ show the four uarts (/dev/ttyUSBx) the first one on the list will go
away when we take it over to do jtag, the second one listed will be away when we take it over to do jtag, the second one listed will be
the one you use for uart/serial communications to the raspberry pi. the one you use for uart/serial communications to the raspberry pi.
FT2232H Mini Module:
The FT2232H Mini Module is very similar to the FT4232H above. The only
difference relevant in our case is the location of the the UART pins,
instead giving us the connections:
JTAG: (FT board left, Raspi right)
TCK: CN2-7 P1-22
TDI: CN2-10 P1-7
TDO: CN2-9 P1-18
TMS: CN2-12 P1-13
UART:
TXRX: CN3-26 P1-10
RXTX: CN3-25 P1-8
Ground:
GND: CN2-2 P1-6
Raspi to Raspi:
TRST: P1-1 P1-15
FTDI board to FTDI board:
VCCIO: CN2-1 CN2-11
VCC: CN3-1 CN3-3
Other alternatives, it doesnt take too much work to use the ftdi drivers Other alternatives, it doesnt take too much work to use the ftdi drivers

33
armjtag/rpi2/README
View File

@@ -215,16 +215,6 @@ that sells FTDI parts might also sell FTDI boards.
FT2232H Mini Module:
TODO when I get one, I assume it is very very similar if not the same
as the FT4232H below, the pinout should be the same I am using the A
and B sections of the chip so those match, the board pinouts may or
may not match the FT4232H board. Not hard to figure out from the
FTDI documents though.
FT4232H Mini Module: FT4232H Mini Module:
Searching for this you get the datasheet for the development board. You Searching for this you get the datasheet for the development board. You
@@ -357,6 +347,29 @@ the one you use for uart/serial communications to the raspberry pi.
FT2232H Mini Module:
The FT2232H Mini Module is very similar to the FT4232H above. The only
difference relevant in our case is the location of the the UART pins,
instead giving us the connections:
JTAG: (FT board left, Raspi right)
TCK: CN2-7 P1-22
TDI: CN2-10 P1-7
TDO: CN2-9 P1-18
TMS: CN2-12 P1-13
UART:
TXRX: CN3-26 P1-10
RXTX: CN3-25 P1-8
Ground:
GND: CN2-2 P1-6
Raspi to Raspi:
TRST: P1-1 P1-15
FTDI board to FTDI board:
VCCIO: CN2-1 CN2-11
VCC: CN3-1 CN3-3
Other alternatives, it doesnt take too much work to use the ftdi drivers Other alternatives, it doesnt take too much work to use the ftdi drivers
to bit bang a board like this. to bit bang a board like this.

45
armjtag/rpi2/bcmrpi2.cfg
View File

@@ -1,10 +1,10 @@
telnet_port 4444 telnet_port 4444
#gdb_port 0 #TODO: Verify gdb setup works as intended.
#tcl_port 0 #TODO: With the command "cache_config" we could configure the L2 cache and avoid the problem which occurs if you wait too long to connect via JTAG...
gdb_port 3333
#tcl_port 0 #No Tcl port needed...
#jtag_khz 1000 #jtag_khz 1000 #Not needed?
adapter_khz 1000 adapter_khz 1000
if { [info exists CHIPNAME] } { if { [info exists CHIPNAME] } {
@@ -13,35 +13,34 @@ if { [info exists CHIPNAME] } {
set _CHIPNAME bcmrpi2 set _CHIPNAME bcmrpi2
} }
# Main CPU DAP
if { [info exists DAP_TAPID] } { if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID set _DAP_TAPID $DAP_TAPID
} else { } else {
set _DAP_TAPID 0x4ba00477 set _DAP_TAPID 0x4ba00477
} }
jtag newtap $_CHIPNAME dap -expected-id $_DAP_TAPID -irlen 4 jtag newtap $_CHIPNAME dap -expected-id $_DAP_TAPID -irlen 4 -ircapture 0x01 -irmask 0x0f
set _TARGETNAME0 $_CHIPNAME.cpu0 set _TARGETNAME0 $_CHIPNAME.cpu0
set _TARGETNAME1 $_CHIPNAME.cpu1 set _TARGETNAME1 $_CHIPNAME.cpu1
set _TARGETNAME2 $_CHIPNAME.cpu2 set _TARGETNAME2 $_CHIPNAME.cpu2
set _TARGETNAME3 $_CHIPNAME.cpu3 set _TARGETNAME3 $_CHIPNAME.cpu3
target create $_TARGETNAME0 cortex_a -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x3fe10000 target create $_TARGETNAME0 cortex_a -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x80010000
target create $_TARGETNAME1 cortex_a -chain-position $_CHIPNAME.dap -coreid 1 -dbgbase 0x3fe12000 target create $_TARGETNAME1 cortex_a -chain-position $_CHIPNAME.dap -coreid 1 -dbgbase 0x80012000
target create $_TARGETNAME2 cortex_a -chain-position $_CHIPNAME.dap -coreid 2 -dbgbase 0x3fe14000 target create $_TARGETNAME2 cortex_a -chain-position $_CHIPNAME.dap -coreid 2 -dbgbase 0x80014000
target create $_TARGETNAME3 cortex_a -chain-position $_CHIPNAME.dap -coreid 3 -dbgbase 0x3fe16000 target create $_TARGETNAME3 cortex_a -chain-position $_CHIPNAME.dap -coreid 3 -dbgbase 0x80016000
target smp $_TARGETNAME0 $_TARGETNAME1 $_TARGETNAME2 $_TARGETNAME3 target smp $_TARGETNAME0 $_TARGETNAME1 $_TARGETNAME2 $_TARGETNAME3
#$_TARGETNAME0 configure -event gdb-attach { $_TARGETNAME0 configure -event gdb-attach {
#cortex_a dbginit cortex_a dbginit
#} }
#$_TARGETNAME1 configure -event gdb-attach { $_TARGETNAME1 configure -event gdb-attach {
#cortex_a dbginit cortex_a dbginit
#} }
#$_TARGETNAME2 configure -event gdb-attach { $_TARGETNAME2 configure -event gdb-attach {
#cortex_a dbginit cortex_a dbginit
#} }
#$_TARGETNAME3 configure -event gdb-attach { $_TARGETNAME3 configure -event gdb-attach {
#cortex_a dbginit cortex_a dbginit
#} }