sambuc/retrobsd
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Use flags for gpio driver to configure available pins.

Browse Source
This commit is contained in:
Serge Vakulenko
2015-09-14 22:07:16 -07:00
parent c6360fb676
commit 3db23e5d6a
41 changed files with 293 additions and 86 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
sys/pic32/32mxsdram/Config
View File

@@ -58,9 +58,6 @@ options "SD0_CS_PIN=3" # ...use pin RF3 TODO: delete
options "SD0_ENA_PORT=TRISB" # for microSD enable... TODO: delete
options "SD0_ENA_PIN=13" # ...use pin RB13 TODO: delete
# General purpose I/O ports
device gpio
# ADC driver
device adc

12
sys/pic32/32mxsdram/Makefile
View File

@@ -3,7 +3,6 @@ PARAM += -DPIC32MX7
PARAM += -DUART3_ENABLED
PARAM += -DSPI4_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSDRAMP_ENABLED
@@ -73,9 +72,9 @@ OBJS = exec_aout.o exec_conf.o exec_elf.o exec_script.o exec_subr.o \
ufs_bio.o ufs_bmap.o ufs_dsort.o ufs_fio.o ufs_inode.o \
ufs_mount.o ufs_namei.o ufs_subr.o ufs_syscalls.o \
ufs_syscalls2.o vfs_vnops.o vm_sched.o vm_swap.o vm_swp.o adc.o \
clock.o cons.o devsw.o exception.o gpio.o machdep.o mem.o pwm.o \
rd_sd.o rd_sdramp.o sdram.o signal.o spi.o spi_bus.o swap.o \
sysctl.o uart.o
clock.o cons.o devsw.o exception.o machdep.o mem.o pwm.o rd_sd.o \
rd_sdramp.o sdram.o signal.o spi.o spi_bus.o swap.o sysctl.o \
uart.o
CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
$S/kernel/exec_script.c $S/kernel/exec_subr.c \
@@ -99,7 +98,7 @@ CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
$S/kernel/vfs_vnops.c $S/kernel/vm_sched.c $S/kernel/vm_swap.c \
$S/kernel/vm_swp.c $S/pic32/adc.c $S/pic32/clock.c \
$S/pic32/cons.c $S/pic32/devsw.c $S/pic32/exception.c \
$S/pic32/gpio.c $S/pic32/machdep.c $S/pic32/mem.c $S/pic32/pwm.c \
$S/pic32/machdep.c $S/pic32/mem.c $S/pic32/pwm.c \
$S/pic32/rd_sd.c $S/pic32/rd_sdramp.c $S/pic32/signal.c \
$S/pic32/spi.c $S/pic32/spi_bus.c $S/pic32/swap.c \
$S/pic32/sysctl.c $S/pic32/uart.c swapunix.c
@@ -325,9 +324,6 @@ devsw.o: $S/pic32/devsw.c
exception.o: $S/pic32/exception.c
${COMPILE_C}
gpio.o: $S/pic32/gpio.c
${COMPILE_C}
machdep.o: $S/pic32/machdep.c
${COMPILE_C}

19
sys/pic32/Config.generic
View File

@@ -96,7 +96,24 @@ options "SD0_ENA_PORT=TRISA" # to enable SD card... TODO: delete
options "SD0_ENA_PIN=5" # ...use pin RA5 TODO: delete
# General purpose I/O ports
device gpio0
# Flags define a mask of available pins
# For 64-pin devices:
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0fff # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x003b # port F
device gpio6 flags 0x03cc # port G
# For 100-pin devices:
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf01e # port C
device gpio3 flags 0xffff # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x313f # port F
device gpio6 flags 0xf3cf # port G
options "GPIO_CLEAR_PORT=TRISA" # clear on startup...
options "GPIO_CLEAR_PIN=5" # ...pin RA5

9
sys/pic32/baremetal/Config
View File

@@ -49,12 +49,3 @@ options "SD0_MHZ=16" # speed 16 MHz
options "SD0_PORT=2" # at spi2 TODO: delete
options "SD0_CS_PORT=TRISD" # for chip select... TODO: delete
options "SD0_CS_PIN=1" # ...use pin RD1 TODO: delete
# General purpose I/O ports
device gpio
# ADC driver
device adc
# PWM driver
device pwm

25
sys/pic32/baremetal/Makefile
View File

@@ -3,9 +3,6 @@ PARAM += -DPIC32MX7
PARAM += -DUART1_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=1
PARAM += -DSD0_CS_PORT=TRISD
PARAM += -DSD0_PORT=2
@@ -63,9 +60,9 @@ OBJS = exec_aout.o exec_conf.o exec_elf.o exec_script.o exec_subr.o \
sys_process.o syscalls.o tty.o tty_subr.o tty_tty.o ufs_alloc.o \
ufs_bio.o ufs_bmap.o ufs_dsort.o ufs_fio.o ufs_inode.o \
ufs_mount.o ufs_namei.o ufs_subr.o ufs_syscalls.o \
ufs_syscalls2.o vfs_vnops.o vm_sched.o vm_swap.o vm_swp.o adc.o \
clock.o cons.o devsw.o exception.o gpio.o machdep.o mem.o pwm.o \
rd_sd.o signal.o spi.o spi_bus.o swap.o sysctl.o uart.o
ufs_syscalls2.o vfs_vnops.o vm_sched.o vm_swap.o vm_swp.o \
clock.o cons.o devsw.o exception.o machdep.o mem.o rd_sd.o \
signal.o spi.o spi_bus.o swap.o sysctl.o uart.o
CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
$S/kernel/exec_script.c $S/kernel/exec_subr.c \
@@ -87,10 +84,9 @@ CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
$S/kernel/ufs_namei.c $S/kernel/ufs_subr.c \
$S/kernel/ufs_syscalls.c $S/kernel/ufs_syscalls2.c \
$S/kernel/vfs_vnops.c $S/kernel/vm_sched.c $S/kernel/vm_swap.c \
$S/kernel/vm_swp.c $S/pic32/adc.c $S/pic32/clock.c \
$S/pic32/cons.c $S/pic32/devsw.c $S/pic32/exception.c \
$S/pic32/gpio.c $S/pic32/machdep.c $S/pic32/mem.c $S/pic32/pwm.c \
$S/pic32/rd_sd.c $S/pic32/signal.c $S/pic32/spi.c \
$S/kernel/vm_swp.c $S/pic32/clock.c $S/pic32/cons.c \
$S/pic32/devsw.c $S/pic32/exception.c $S/pic32/machdep.c \
$S/pic32/mem.c $S/pic32/rd_sd.c $S/pic32/signal.c $S/pic32/spi.c \
$S/pic32/spi_bus.c $S/pic32/swap.c $S/pic32/sysctl.c \
$S/pic32/uart.c swapunix.c
@@ -300,9 +296,6 @@ vm_swap.o: $S/kernel/vm_swap.c
vm_swp.o: $S/kernel/vm_swp.c
${COMPILE_C}
adc.o: $S/pic32/adc.c
${COMPILE_C}
clock.o: $S/pic32/clock.c
${COMPILE_C}
@@ -315,18 +308,12 @@ devsw.o: $S/pic32/devsw.c
exception.o: $S/pic32/exception.c
${COMPILE_C}
gpio.o: $S/pic32/gpio.c
${COMPILE_C}
machdep.o: $S/pic32/machdep.c
${COMPILE_C}
mem.o: $S/pic32/mem.c
${COMPILE_C}
pwm.o: $S/pic32/pwm.c
${COMPILE_C}
rd_sd.o: $S/pic32/rd_sd.c
${COMPILE_C}

4
sys/pic32/cons.c
View File

@@ -45,8 +45,8 @@ void cninit()
void cnidentify()
{
printf ("console: %s (%d,%d)\n", cdevname(console_device),
major(console_device), minor(console_device));
//printf ("console: %s (%d,%d)\n", cdevname(console_device),
// major(console_device), minor(console_device));
}
int cnopen(dev_t dev, int flag, int mode)

11
sys/pic32/duinomite-emega/Config
View File

@@ -55,7 +55,16 @@ options "SD0_ENA_PORT=TRISG" # for SD enable... TODO: delete
options "SD0_ENA_PIN=13" # ...use pin RG13 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RD1, RD2, RD3, RG12, RG13 - spi3, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf01e # port C
device gpio3 flags 0xfff1 # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x313f # port F
device gpio6 flags 0xc3cf # port G
# ADC driver
device adc

12
sys/pic32/duinomite-emega/Config-uart
View File

@@ -55,7 +55,17 @@ options "SD0_ENA_PORT=TRISG" # for SD enable... TODO: delete
options "SD0_ENA_PIN=13" # ...use pin RG13 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RB8, RB13, RB14 - uart5
# RD1, RD2, RD3, RG12, RG13 - spi3, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0x9eff # port B
device gpio2 flags 0xf01e # port C
device gpio3 flags 0xfff1 # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x313f # port F
device gpio6 flags 0xc3cf # port G
# ADC driver
device adc

6
sys/pic32/duinomite-emega/Makefile
View File

@@ -4,6 +4,12 @@ PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI3_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_ENA_PIN=13

10
sys/pic32/duinomite/Config
View File

@@ -54,7 +54,15 @@ options "SD0_ENA_PORT=TRISB" # for SD enable... TODO: delete
options "SD0_ENA_PIN=13" # ...use pin RB13 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RD1, RD2, RD3, RD5, RB13 - spi3, SD card
device gpio1 flags 0xdfff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0fd1 # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x003b # port F
device gpio6 flags 0x03cc # port G
# ADC driver
device adc

11
sys/pic32/duinomite/Config-uart
View File

@@ -54,7 +54,16 @@ options "SD0_ENA_PORT=TRISB" # for SD enable... TODO: delete
options "SD0_ENA_PIN=13" # ...use pin RB13 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RB8, RB14 - uart5
# RD1, RD2, RD3, RD5, RB13 - spi3, SD card
device gpio1 flags 0x9eff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0fd1 # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x003b # port F
device gpio6 flags 0x03cc # port G
# ADC driver
device adc

7
sys/pic32/duinomite/Makefile
View File

@@ -3,7 +3,12 @@ PARAM += -DPIC32MX7
PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI3_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_ENA_PIN=13

12
sys/pic32/explorer16/Config
View File

@@ -53,7 +53,17 @@ options "SD0_CS_PORT=TRISB" # for chip select... TODO: delete
options "SD0_CS_PIN=1" # ...use pin RB1 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RF4, RF5 - uart2
# RC4, RD0, RD10, RB1 - spi1, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xfffd # port B
device gpio2 flags 0xf00e # port C
device gpio3 flags 0xfbfe # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x310f # port F
device gpio6 flags 0xf3cf # port G
# ADC driver
device adc

6
sys/pic32/explorer16/Makefile
View File

@@ -4,6 +4,12 @@ PARAM += -DUART2_ENABLED
PARAM += -DSPI1_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=1

12
sys/pic32/fubarino/Config
View File

@@ -1,6 +1,6 @@
#
# Fubarino SD board
# ==================================
# =================
# Console on USB.
# For details, see https://github.com/RetroBSD/retrobsd/wiki/Board-Fubarino-SD
#
@@ -49,7 +49,15 @@ options "SD0_CS_PORT=TRISG" # for chip select... TODO: delete
options "SD0_CS_PIN=9" # ...use pin RA9 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RG6, RG7, RG8, RG9 - spi2, SD card
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0fff # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x003b # port F
device gpio6 flags 0x000c # port G
# ADC driver
device adc

12
sys/pic32/fubarino/Config-uart-sramc
View File

@@ -54,7 +54,17 @@ options "SD0_CS_PIN=9" # ...use pin RA9 TODO: delete
options "SD0_MHZ=20" # increase data speed
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RD2, RD3 - uart1
# RF4, RF5 - uart2
# RG6, RG7, RG8, RG9 - spi2, SD card
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0ff3 # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x000b # port F
device gpio6 flags 0x000c # port G
# ADC driver
device adc

7
sys/pic32/fubarino/Makefile
View File

@@ -3,7 +3,12 @@ PARAM += -DPIC32MX7
PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DGLCD_ENABLED

3
sys/pic32/gpio.c
View File

@@ -624,8 +624,7 @@ gpioprobe(config)
gpio_confmask[unit] = flags;
gpio_print(unit | MINOR_CONF, buf);
printf("gpio%u: port%c, pins %s", unit,
unit + (unit<8 ? 'A' : 'B'), buf);
printf("gpio%u: port%c, pins %s", unit, unit + 'A', buf);
return 1;
}

16
sys/pic32/max32/Config
View File

@@ -31,9 +31,9 @@ config unix root on sd0a
swap on sd0b
# Serial UART ports
# Cannot use uart3, as it conflicts with spi2
device uart1 # Serial-to-USB converter
device uart2
device uart3
device uart4
# Console options
@@ -50,7 +50,19 @@ options "SD0_CS_PORT=TRISC" # for chip select... TODO: use fl
options "SD0_CS_PIN=14" # ...use pin RC14 TODO: use flags
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RF2, RF8 - uart1
# RF4, RF5 - uart2
# RD14, RD15 - uart4
# RG6, RG7, RG8, RC14 - spi2, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xb01e # port C
device gpio3 flags 0x3fff # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x300b # port F
device gpio6 flags 0xf20f # port G
# ADC driver
device adc

7
sys/pic32/max32/Makefile
View File

@@ -2,11 +2,16 @@ PARAM = -DMAX32
PARAM += -DPIC32MX7
PARAM += -DUART1_ENABLED
PARAM += -DUART2_ENABLED
PARAM += -DUART3_ENABLED
PARAM += -DUART4_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=14

10
sys/pic32/maximite-color/Config
View File

@@ -51,7 +51,15 @@ options "SD0_CS_PORT=TRISA" # for chip select... TODO: delete
options "SD0_CS_PIN=1" # ...use pin RA1 TODO: delete
# General purpose I/O ports
device gpio
# The following pins excluded:
# RF4, RF5, RD10, RA1 - spi4, SD card
device gpio0 flags 0xc6fd # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf01e # port C
device gpio3 flags 0xfbff # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x310f # port F
device gpio6 flags 0xf3cf # port G
# ADC driver
device adc

6
sys/pic32/maximite-color/Makefile
View File

@@ -4,6 +4,12 @@ PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI4_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=1

11
sys/pic32/maximite/Config
View File

@@ -52,7 +52,16 @@ options "SD0_CS_PORT=TRISE" # for chip select... TODO: delete
options "SD0_CS_PIN=0" # ...use pin RE0 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RF4, RF5, RD10, RE0 - spi4, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf01e # port C
device gpio3 flags 0xfbff # port D
device gpio4 flags 0x03fe # port E
device gpio5 flags 0x310f # port F
device gpio6 flags 0xf3cf # port G
# ADC driver
device adc

6
sys/pic32/maximite/Makefile
View File

@@ -4,6 +4,12 @@ PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI4_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=0

12
sys/pic32/mmb-mx7/Config
View File

@@ -59,7 +59,17 @@ options "SD0_CS_PIN=9" # ...use pin RA9 TODO: delete
options "SD0_MHZ=8" # speed 8 MHz
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RF2, RF8 - uart1
# RC4, RD0, RD10, RA9 - spi1, SD card
device gpio0 flags 0xc4ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf00e # port C
device gpio3 flags 0xfbfe # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x303b # port F
device gpio6 flags 0xf3cf # port G
options "GPIO_CLEAR_PORT=TRISD" # clear on startup...
options "GPIO_CLEAR_PIN=2" # ...pin RD2

6
sys/pic32/mmb-mx7/Makefile
View File

@@ -5,6 +5,12 @@ PARAM += -DUART1_ENABLED
PARAM += -DSPI1_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DGPIO_CLEAR_PIN=2

3
sys/pic32/picadillo/Config
View File

@@ -43,9 +43,6 @@ options "SD0_PORT=2" # at spi2 TODO: delete
options "SD0_CS_PORT=TRISG" # for chip select... TODO: delete
options "SD0_CS_PIN=9" # ...use pin RG9 TODO: delete
# General purpose I/O ports
device gpio
# ADC driver
device adc

3
sys/pic32/picadillo/Config-rambo
View File

@@ -44,9 +44,6 @@ options "SD0_PORT=2" # at spi2 TODO: delete
options "SD0_CS_PORT=TRISG" # for chip select... TODO: delete
options "SD0_CS_PIN=9" # ...use pin RG9 TODO: delete
# General purpose I/O ports
device gpio
# ADC driver
device adc

17
sys/pic32/picadillo/Makefile
View File

@@ -3,7 +3,6 @@ PARAM += -DPIC32MX7
PARAM += -DUART1_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DHXTFT_ENABLED
@@ -59,9 +58,8 @@ OBJS = exec_aout.o exec_conf.o exec_elf.o exec_script.o exec_subr.o \
ufs_bio.o ufs_bmap.o ufs_dsort.o ufs_fio.o ufs_inode.o \
ufs_mount.o ufs_namei.o ufs_subr.o ufs_syscalls.o \
ufs_syscalls2.o vfs_vnops.o vm_sched.o vm_swap.o vm_swp.o adc.o \
clock.o cons.o devsw.o exception.o gpio.o hx8357.o machdep.o \
mem.o pwm.o rd_sd.o signal.o spi.o spi_bus.o swap.o sysctl.o \
uart.o
clock.o cons.o devsw.o exception.o hx8357.o machdep.o mem.o \
pwm.o rd_sd.o signal.o spi.o spi_bus.o swap.o sysctl.o uart.o
CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
$S/kernel/exec_script.c $S/kernel/exec_subr.c \
@@ -85,10 +83,10 @@ CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
$S/kernel/vfs_vnops.c $S/kernel/vm_sched.c $S/kernel/vm_swap.c \
$S/kernel/vm_swp.c $S/pic32/adc.c $S/pic32/clock.c \
$S/pic32/cons.c $S/pic32/devsw.c $S/pic32/exception.c \
$S/pic32/gpio.c $S/pic32/hx8357.c $S/pic32/machdep.c \
$S/pic32/mem.c $S/pic32/pwm.c $S/pic32/rd_sd.c $S/pic32/signal.c \
$S/pic32/spi.c $S/pic32/spi_bus.c $S/pic32/swap.c \
$S/pic32/sysctl.c $S/pic32/uart.c swapunix.c
$S/pic32/hx8357.c $S/pic32/machdep.c $S/pic32/mem.c \
$S/pic32/pwm.c $S/pic32/rd_sd.c $S/pic32/signal.c $S/pic32/spi.c \
$S/pic32/spi_bus.c $S/pic32/swap.c $S/pic32/sysctl.c \
$S/pic32/uart.c swapunix.c
# load lines for config "xxx" will be emitted as:
# xxx: ${SYSTEM_DEP} swapxxx.o
@@ -311,9 +309,6 @@ devsw.o: $S/pic32/devsw.c
exception.o: $S/pic32/exception.c
${COMPILE_C}
gpio.o: $S/pic32/gpio.c
${COMPILE_C}
hx8357.o: $S/pic32/hx8357.c
${COMPILE_C}

10
sys/pic32/pinguino-micro/Config
View File

@@ -49,7 +49,15 @@ options "SD0_CS_PORT=TRISB" # for chip select... TODO: delete
options "SD0_CS_PIN=13" # ...use pin RB13 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RG6, RG7, RG8, RB13 - spi2, SD card
device gpio1 flags 0xdfff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0fff # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x003b # port F
device gpio6 flags 0x020c # port G
# ADC driver
device adc

7
sys/pic32/pinguino-micro/Makefile
View File

@@ -3,7 +3,12 @@ PARAM += -DPIC32MX7
PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=13

12
sys/pic32/sdxl/Config
View File

@@ -44,13 +44,21 @@ options "USB_NUM_STRING_DESCRIPTORS=3"
controller spi2 # SD card
# microSD card
device sd0 at spi2 pin RG9 # select pin RG9
device sd0 at spi2 pin RG9 # select pin
options "SD0_PORT=2" # sd0 at spi2 TODO: delete
options "SD0_CS_PORT=TRISG" # for chip select... TODO: delete
options "SD0_CS_PIN=9" # ...use pin RA9 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RG6, RG7, RG8, RG9 - spi2, SD card
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf000 # port C
device gpio3 flags 0x0fff # port D
device gpio4 flags 0x00ff # port E
device gpio5 flags 0x003b # port F
device gpio6 flags 0x000c # port G
# ADC driver
device adc

7
sys/pic32/sdxl/Makefile
View File

@@ -3,7 +3,12 @@ PARAM += -DPIC32MX7
PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DGLCD_ENABLED

11
sys/pic32/starter-kit/Config
View File

@@ -51,7 +51,16 @@ options "SD0_CS_PORT=TRISB" # for chip select... TODO: delete
options "SD0_CS_PIN=1" # ...use pin RB1 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RC4, RD0, RD10, RB1 - spi1, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xfffd # port B
device gpio2 flags 0xf00e # port C
device gpio3 flags 0xfbfe # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x313f # port F
device gpio6 flags 0xf3cf # port G
# ADC driver
device adc

6
sys/pic32/starter-kit/Makefile
View File

@@ -4,6 +4,12 @@ PARAM += -DUARTUSB_ENABLED
PARAM += -DSPI1_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=1

11
sys/pic32/ubw32/Config
View File

@@ -64,7 +64,16 @@ options "SD1_CS_PORT=TRISA" # for sd1 chip select...TODO: delete
options "SD1_CS_PIN=10" # ...use pin RA9 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RC4, RD0, RD10, RA9, RA10 - spi1, SD card
device gpio0 flags 0xc0ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf00e # port C
device gpio3 flags 0xfbfe # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x313f # port F
device gpio6 flags 0xf3cf # port G
# ADC driver
device adc

12
sys/pic32/ubw32/Config-uart
View File

@@ -61,7 +61,17 @@ options "SD1_CS_PORT=TRISA" # for sd1 chip select...TODO: delete
options "SD1_CS_PIN=10" # ...use pin RA9 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RF4, RF5 - uart2
# RC4, RD0, RD10, RA9, RA10 - spi1, SD card
device gpio0 flags 0xc0ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf00e # port C
device gpio3 flags 0xfbfe # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x310f # port F
device gpio6 flags 0xf3cf # port G
# ADC driver
device adc

6
sys/pic32/ubw32/Makefile
View File

@@ -5,6 +5,12 @@ PARAM += -DSPI1_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DSD1_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD1_CS_PIN=10

12
sys/pic32/wf32/Config
View File

@@ -49,7 +49,17 @@ options "SD0_CS_PORT=TRISD" # for chip select... TODO: delete
options "SD0_CS_PIN=4" # ...use pin RD4 TODO: delete
# General purpose I/O ports
device gpio
# Flags define a mask of available pins
# The following pins excluded:
# RF2, RF8 - uart1
# RG6, RG7, RG8, RD4 - spi2, SD card
device gpio0 flags 0xc6ff # port A
device gpio1 flags 0xffff # port B
device gpio2 flags 0xf01e # port C
device gpio3 flags 0xffef # port D
device gpio4 flags 0x03ff # port E
device gpio5 flags 0x303b # port F
device gpio6 flags 0xf20f # port G
# ADC driver
device adc

6
sys/pic32/wf32/Makefile
View File

@@ -4,6 +4,12 @@ PARAM += -DUART1_ENABLED
PARAM += -DSPI2_ENABLED
PARAM += -DSD_ENABLED
PARAM += -DGPIO_ENABLED
PARAM += -DGPIO1_ENABLED
PARAM += -DGPIO2_ENABLED
PARAM += -DGPIO3_ENABLED
PARAM += -DGPIO4_ENABLED
PARAM += -DGPIO5_ENABLED
PARAM += -DGPIO6_ENABLED
PARAM += -DADC_ENABLED
PARAM += -DPWM_ENABLED
PARAM += -DSD0_CS_PIN=4