New kernel configuration for starter kit board.
This commit is contained in:
Serge Vakulenko
3
sys/pic32/starter-kit/.gitignore
vendored
3
sys/pic32/starter-kit/.gitignore
vendored
@@ -7,3 +7,6 @@ unix.bin
|
||||
unix.map
|
||||
usbboot.map
|
||||
vers.c
|
||||
*.h
|
||||
ioconf.c
|
||||
swapunix.c
|
||||
|
||||
65
sys/pic32/starter-kit/Config
Normal file
65
sys/pic32/starter-kit/Config
Normal file
@@ -0,0 +1,65 @@
|
||||
#
|
||||
# Microchip PIC32MX Ethernet/USB Starter Kit
|
||||
# with I/O Expansion board and SD card pictail module
|
||||
# ===================================================
|
||||
# Console on USB.
|
||||
#
|
||||
# To build the kernel, use:
|
||||
# cd sys/pic32/explorer16
|
||||
# kconfig Config
|
||||
# make clean
|
||||
# make
|
||||
#
|
||||
# Format of this file is described on page:
|
||||
# http://retrobsd.org/wiki/doku.php/doc/kconfig
|
||||
#
|
||||
architecture "pic32"
|
||||
cpu "PIC32MX7" # Processor variant
|
||||
board "STARTERKIT" # Board type
|
||||
ldscript "cfg/bare.ld" # Linker script
|
||||
|
||||
# Standard system options
|
||||
options "CPU_KHZ=80000" # Oscillator frequency of CPU core
|
||||
options "BUS_KHZ=80000" # Frequency of peripheral bus
|
||||
options "BUS_DIV=1" # Bus clock divisor 1/2/4/8
|
||||
|
||||
# LED
|
||||
options "LED_DISK_PORT=TRISD" # for disk activity LED...
|
||||
options "LED_DISK_PIN=1" # ...use pin RD1
|
||||
options "LED_KERNEL_PORT=TRISD" # for kernel activity LED...
|
||||
options "LED_KERNEL_PIN=2" # ...use pin RD2
|
||||
|
||||
# Root filesystem at /dev/sd0a, swap at /dev/sd0b
|
||||
config unix root on sd0a
|
||||
swap on sd0b
|
||||
|
||||
# Console options
|
||||
options "CONSOLE_DEVICE=ttyUSB0" # Console on USB
|
||||
|
||||
# Virtual UART on USB
|
||||
pseudo-device uartusb
|
||||
options "UARTUSB_ENABLED" # TODO: delete this option
|
||||
options "USB_MAX_EP_NUMBER=3"
|
||||
options "USB_NUM_STRING_DESCRIPTORS=3"
|
||||
|
||||
# SPI ports
|
||||
controller spi1 # SD card
|
||||
options "SPI_ENABLED" # TODO: delete this option
|
||||
|
||||
# SD card
|
||||
disk sd0 at spi1 flags 0x21 # select pin RB1
|
||||
options "SD0_PORT=1" # at spi1 TODO: delete
|
||||
options "SD0_CS_PORT=TRISB" # for chip select... TODO: use flags
|
||||
options "SD0_CS_PIN=1" # ...use pin RB1 TODO: use flags
|
||||
|
||||
# General purpose I/O ports
|
||||
device gpio0
|
||||
options "GPIO_ENABLED" # TODO: delete this option
|
||||
|
||||
# ADC driver
|
||||
device adc0
|
||||
options "ADC_ENABLED" # TODO: delete this option
|
||||
|
||||
# PWM driver
|
||||
device pwm0
|
||||
options "PWM_ENABLED" # TODO: delete this option
|
||||
@@ -1,45 +1,360 @@
|
||||
BUILDPATH = ../../../tools/configsys/../../sys/pic32
|
||||
H = ../../../tools/configsys/../../sys/include
|
||||
M = ../../../tools/configsys/../../sys/pic32
|
||||
S = ../../../tools/configsys/../../sys/kernel
|
||||
PARAM = -DSTARTERKIT
|
||||
PARAM += -DPIC32MX7
|
||||
PARAM += -DPWM_ENABLED
|
||||
PARAM += -DADC_ENABLED
|
||||
PARAM += -DGPIO_ENABLED
|
||||
PARAM += -DSD0_CS_PIN=1
|
||||
PARAM += -DSD0_CS_PORT=TRISB
|
||||
PARAM += -DSD0_PORT=1
|
||||
PARAM += -DSPI_ENABLED
|
||||
PARAM += -DUSB_NUM_STRING_DESCRIPTORS=3
|
||||
PARAM += -DUSB_MAX_EP_NUMBER=3
|
||||
PARAM += -DUARTUSB_ENABLED
|
||||
PARAM += -DCONSOLE_DEVICE=ttyUSB0
|
||||
PARAM += -DLED_KERNEL_PIN=2
|
||||
PARAM += -DLED_KERNEL_PORT=TRISD
|
||||
PARAM += -DLED_DISK_PIN=1
|
||||
PARAM += -DLED_DISK_PORT=TRISD
|
||||
PARAM += -DBUS_DIV=1
|
||||
PARAM += -DBUS_KHZ=80000
|
||||
PARAM += -DCPU_KHZ=80000
|
||||
LDSCRIPT = "cfg/bare.ld"
|
||||
#
|
||||
# Makefile for RetroBSD, pic32 target
|
||||
#
|
||||
# DEBUG is set to -g by kconfig if debugging is requested (kconfig -g).
|
||||
#
|
||||
include ../gcc-config.mk
|
||||
|
||||
vpath %.c $(M):$(S)
|
||||
vpath %.S $(M):$(S)
|
||||
AS = ${MIPS_GCC_PREFIX}as ${DEBUG} -mips32r2 -EL
|
||||
CC = ${MIPS_GCC_PREFIX}gcc ${DEBUG} -mips32r2 -EL -nostdinc -fno-builtin -Werror -Wall
|
||||
CPP = ${MIPS_GCC_PREFIX}cpp
|
||||
LD = ${MIPS_GCC_PREFIX}gcc -mips32r2 -EL
|
||||
LDFLAGS = -nostdlib -T ../${LDSCRIPT} -Wl,-Map=$(basename $@).map
|
||||
SIZE = ${MIPS_GCC_PREFIX}size
|
||||
OBJCOPY = ${MIPS_GCC_PREFIX}objcopy
|
||||
OBJDUMP = ${MIPS_GCC_PREFIX}objdump
|
||||
|
||||
KERNOBJ += adc.o clock.o cons.o devsw.o exception.o exec_aout.o exec_conf.o exec_elf.o exec_script.o exec_subr.o gpio.o init_main.o init_sysent.o kern_clock.o kern_descrip.o kern_exec.o kern_exit.o kern_fork.o kern_mman.o kern_proc.o kern_prot.o kern_prot2.o kern_resource.o kern_sig.o kern_sig2.o kern_subr.o kern_synch.o kern_sysctl.o kern_time.o machdep.o mem.o rd_sd.o rdisk.o signal.o spi_bus.o startup.o subr_prf.o subr_rmap.o swap.o sys_generic.o sys_inode.o sys_pipe.o sys_process.o syscalls.o sysctl.o tty.o tty_subr.o tty_tty.o ufs_alloc.o ufs_bio.o ufs_bmap.o ufs_dsort.o ufs_fio.o ufs_inode.o ufs_mount.o ufs_namei.o ufs_subr.o ufs_syscalls.o ufs_syscalls2.o usb_device.o usb_function_cdc.o usb_uart.o vers.o vfs_vnops.o vm_sched.o vm_swap.o vm_swp.o
|
||||
EXTRA_TARGETS =
|
||||
ifneq (${MIPS_GCC_FORMAT},)
|
||||
LDFLAGS += -Wl,--oformat=${MIPS_GCC_FORMAT}
|
||||
endif
|
||||
|
||||
DEFS += -DADC_ENABLED=YES
|
||||
DEFS += -DBUS_DIV=1
|
||||
DEFS += -DBUS_KHZ='CPU_KHZ/BUS_DIV'
|
||||
DEFS += -DCONSOLE_DEVICE=ttyUSB0
|
||||
DEFS += -DCPU_IDIV=2
|
||||
DEFS += -DCPU_KHZ='((CRYSTAL*1000)/CPU_IDIV*CPU_MUL/CPU_ODIV)'
|
||||
DEFS += -DCPU_MUL=20
|
||||
DEFS += -DCPU_ODIV=1
|
||||
DEFS += -DCRYSTAL=8
|
||||
DEFS += -DEXEC_AOUT
|
||||
DEFS += -DEXEC_ELF
|
||||
DEFS += -DEXEC_SCRIPT
|
||||
DEFS += -DGPIO_ENABLED=YES
|
||||
DEFS += -DKERNEL
|
||||
DEFS += -DLED_DISK_PIN=1
|
||||
DEFS += -DLED_DISK_PORT=TRISD
|
||||
DEFS += -DLED_KERNEL_PIN=2
|
||||
DEFS += -DLED_KERNEL_PORT=TRISD
|
||||
DEFS += -DPIC32MX7
|
||||
DEFS += -DSD0_CS_PIN=1
|
||||
DEFS += -DSD0_CS_PORT=TRISB
|
||||
DEFS += -DSD0_PORT=1
|
||||
DEFS += -DUARTUSB_ENABLED=YES
|
||||
DEFS += -DUCB_METER
|
||||
DEFS += -DUSB_MAX_EP_NUMBER=3
|
||||
DEFS += -DUSB_NUM_STRING_DESCRIPTORS=3
|
||||
# sources are located via $S relative to the compilation directory
|
||||
S = ../..
|
||||
|
||||
DEPFLAGS = -MT $@ -MP -MD -MF .deps/$*.dep
|
||||
DEFS = -I. ${PARAM} -DKERNEL $(DEPFLAGS)
|
||||
CFLAGS = -O ${DEFS}
|
||||
|
||||
# compile rules: rules are named COMPILE_${SUFFIX}
|
||||
# SUFFIX is the file suffix, capitalized (e.g. C for a .c file).
|
||||
|
||||
COMPILE_C = ${CC} -c ${CFLAGS} $<
|
||||
COMPILE_S = ${CC} -c ${DEFS} $<
|
||||
|
||||
OBJS = exec_aout.o exec_conf.o exec_elf.o exec_script.o exec_subr.o \
|
||||
init_main.o init_sysent.o kern_clock.o kern_descrip.o \
|
||||
kern_exec.o kern_exit.o kern_fork.o kern_mman.o kern_proc.o \
|
||||
kern_prot.o kern_prot2.o kern_resource.o kern_sig.o kern_sig2.o \
|
||||
kern_subr.o kern_synch.o kern_sysctl.o kern_time.o rdisk.o \
|
||||
subr_prf.o subr_rmap.o sys_generic.o sys_inode.o sys_pipe.o \
|
||||
sys_process.o syscalls.o tty.o tty_subr.o tty_tty.o ufs_alloc.o \
|
||||
ufs_bio.o ufs_bmap.o ufs_dsort.o ufs_fio.o ufs_inode.o \
|
||||
ufs_mount.o ufs_namei.o ufs_subr.o ufs_syscalls.o \
|
||||
ufs_syscalls2.o vfs_vnops.o vm_sched.o vm_swap.o vm_swp.o adc.o \
|
||||
clock.o cons.o devsw.o exception.o gpio.o machdep.o mem.o pwm.o \
|
||||
rd_sd.o signal.o spi.o spi_bus.o swap.o sysctl.o usb_device.o \
|
||||
usb_function_cdc.o usb_uart.o
|
||||
|
||||
CFILES = $S/kernel/exec_aout.c $S/kernel/exec_conf.c $S/kernel/exec_elf.c \
|
||||
$S/kernel/exec_script.c $S/kernel/exec_subr.c \
|
||||
$S/kernel/init_main.c $S/kernel/init_sysent.c \
|
||||
$S/kernel/kern_clock.c $S/kernel/kern_descrip.c \
|
||||
$S/kernel/kern_exec.c $S/kernel/kern_exit.c \
|
||||
$S/kernel/kern_fork.c $S/kernel/kern_mman.c \
|
||||
$S/kernel/kern_proc.c $S/kernel/kern_prot.c \
|
||||
$S/kernel/kern_prot2.c $S/kernel/kern_resource.c \
|
||||
$S/kernel/kern_sig.c $S/kernel/kern_sig2.c $S/kernel/kern_subr.c \
|
||||
$S/kernel/kern_synch.c $S/kernel/kern_sysctl.c \
|
||||
$S/kernel/kern_time.c $S/kernel/rdisk.c $S/kernel/subr_prf.c \
|
||||
$S/kernel/subr_rmap.c $S/kernel/sys_generic.c \
|
||||
$S/kernel/sys_inode.c $S/kernel/sys_pipe.c \
|
||||
$S/kernel/sys_process.c $S/kernel/syscalls.c $S/kernel/tty.c \
|
||||
$S/kernel/tty_subr.c $S/kernel/tty_tty.c $S/kernel/ufs_alloc.c \
|
||||
$S/kernel/ufs_bio.c $S/kernel/ufs_bmap.c $S/kernel/ufs_dsort.c \
|
||||
$S/kernel/ufs_fio.c $S/kernel/ufs_inode.c $S/kernel/ufs_mount.c \
|
||||
$S/kernel/ufs_namei.c $S/kernel/ufs_subr.c \
|
||||
$S/kernel/ufs_syscalls.c $S/kernel/ufs_syscalls2.c \
|
||||
$S/kernel/vfs_vnops.c $S/kernel/vm_sched.c $S/kernel/vm_swap.c \
|
||||
$S/kernel/vm_swp.c $S/pic32/adc.c $S/pic32/clock.c \
|
||||
$S/pic32/cons.c $S/pic32/devsw.c $S/pic32/exception.c \
|
||||
$S/pic32/gpio.c $S/pic32/machdep.c $S/pic32/mem.c $S/pic32/pwm.c \
|
||||
$S/pic32/rd_sd.c $S/pic32/signal.c $S/pic32/spi.c \
|
||||
$S/pic32/spi_bus.c $S/pic32/swap.c $S/pic32/sysctl.c \
|
||||
$S/pic32/usb_device.c $S/pic32/usb_function_cdc.c \
|
||||
$S/pic32/usb_uart.c swapunix.c
|
||||
|
||||
# load lines for config "xxx" will be emitted as:
|
||||
# xxx: ${SYSTEM_DEP} swapxxx.o
|
||||
# ${SYSTEM_LD_HEAD}
|
||||
# ${SYSTEM_LD} swapxxx.o
|
||||
# ${SYSTEM_LD_TAIL}
|
||||
SYSTEM_OBJ = startup.o ${OBJS} #ioconf.o
|
||||
ifeq (devcfg.c,$(wildcard devcfg.c))
|
||||
SYSTEM_OBJ += devcfg.o
|
||||
endif
|
||||
SYSTEM_DEP = Makefile ioconf.c machine sys .deps ${SYSTEM_OBJ}
|
||||
SYSTEM_LD_HEAD = sh ../newvers.sh > vers.c; ${CC} $(CFLAGS) -c vers.c; rm -f $@
|
||||
SYSTEM_LD = -@echo ${LD} ${LDFLAGS} '$${SYSTEM_OBJ}' vers.o -o $@; \
|
||||
${LD} ${LDFLAGS} ${SYSTEM_OBJ} vers.o -o $@
|
||||
SYSTEM_LD_TAIL = ${SIZE} $@; \
|
||||
$(OBJCOPY) -O ihex --change-addresses=0x80000000 $@ $(basename $@).hex; \
|
||||
$(OBJCOPY) -O binary -R .boot -R .config $@ $(basename $@).bin; \
|
||||
$(OBJDUMP) -d -S $@ > $(basename $@).dis
|
||||
|
||||
unix: unix.elf
|
||||
|
||||
unix.elf: ${SYSTEM_DEP} swapunix.o
|
||||
${SYSTEM_LD_HEAD}
|
||||
${SYSTEM_LD} swapunix.o
|
||||
${SYSTEM_LD_TAIL}
|
||||
|
||||
swapunix.o: swapunix.c
|
||||
${COMPILE_C}
|
||||
|
||||
all: unix
|
||||
|
||||
clean:
|
||||
rm -rf .deps *.elf *.o *.map *.dis *.bin machine sys
|
||||
|
||||
clean-all: clean
|
||||
rm -f *.h *.hex ioconf.c swap*.c vers.c
|
||||
|
||||
reconfig ioconf.c: Config ../../../tools/kconfig/kconfig
|
||||
../../../tools/kconfig/kconfig Config
|
||||
$(MAKE) clean
|
||||
rm -f *.hex
|
||||
|
||||
load: unix.elf
|
||||
pic32prog unix.hex
|
||||
|
||||
machine:
|
||||
ln -s .. $@
|
||||
|
||||
sys:
|
||||
ln -s ../../include $@
|
||||
|
||||
.deps:
|
||||
mkdir .deps
|
||||
|
||||
startup.o: ../startup.S
|
||||
${COMPILE_S}
|
||||
|
||||
ioconf.o: ioconf.c
|
||||
${COMPILE_C}
|
||||
|
||||
exec_aout.o: $S/kernel/exec_aout.c
|
||||
${COMPILE_C}
|
||||
|
||||
exec_conf.o: $S/kernel/exec_conf.c
|
||||
${COMPILE_C}
|
||||
|
||||
exec_elf.o: $S/kernel/exec_elf.c
|
||||
${COMPILE_C}
|
||||
|
||||
exec_script.o: $S/kernel/exec_script.c
|
||||
${COMPILE_C}
|
||||
|
||||
exec_subr.o: $S/kernel/exec_subr.c
|
||||
${COMPILE_C}
|
||||
|
||||
init_main.o: $S/kernel/init_main.c
|
||||
${COMPILE_C}
|
||||
|
||||
init_sysent.o: $S/kernel/init_sysent.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_clock.o: $S/kernel/kern_clock.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_descrip.o: $S/kernel/kern_descrip.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_exec.o: $S/kernel/kern_exec.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_exit.o: $S/kernel/kern_exit.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_fork.o: $S/kernel/kern_fork.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_mman.o: $S/kernel/kern_mman.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_proc.o: $S/kernel/kern_proc.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_prot.o: $S/kernel/kern_prot.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_prot2.o: $S/kernel/kern_prot2.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_resource.o: $S/kernel/kern_resource.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_sig.o: $S/kernel/kern_sig.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_sig2.o: $S/kernel/kern_sig2.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_subr.o: $S/kernel/kern_subr.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_synch.o: $S/kernel/kern_synch.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_sysctl.o: $S/kernel/kern_sysctl.c
|
||||
${COMPILE_C}
|
||||
|
||||
kern_time.o: $S/kernel/kern_time.c
|
||||
${COMPILE_C}
|
||||
|
||||
rdisk.o: $S/kernel/rdisk.c
|
||||
${COMPILE_C}
|
||||
|
||||
subr_prf.o: $S/kernel/subr_prf.c
|
||||
${COMPILE_C}
|
||||
|
||||
subr_rmap.o: $S/kernel/subr_rmap.c
|
||||
${COMPILE_C}
|
||||
|
||||
sys_generic.o: $S/kernel/sys_generic.c
|
||||
${COMPILE_C}
|
||||
|
||||
sys_inode.o: $S/kernel/sys_inode.c
|
||||
${COMPILE_C}
|
||||
|
||||
sys_pipe.o: $S/kernel/sys_pipe.c
|
||||
${COMPILE_C}
|
||||
|
||||
sys_process.o: $S/kernel/sys_process.c
|
||||
${COMPILE_C}
|
||||
|
||||
syscalls.o: $S/kernel/syscalls.c
|
||||
${COMPILE_C}
|
||||
|
||||
tty.o: $S/kernel/tty.c
|
||||
${COMPILE_C}
|
||||
|
||||
tty_subr.o: $S/kernel/tty_subr.c
|
||||
${COMPILE_C}
|
||||
|
||||
tty_tty.o: $S/kernel/tty_tty.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_alloc.o: $S/kernel/ufs_alloc.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_bio.o: $S/kernel/ufs_bio.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_bmap.o: $S/kernel/ufs_bmap.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_dsort.o: $S/kernel/ufs_dsort.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_fio.o: $S/kernel/ufs_fio.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_inode.o: $S/kernel/ufs_inode.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_mount.o: $S/kernel/ufs_mount.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_namei.o: $S/kernel/ufs_namei.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_subr.o: $S/kernel/ufs_subr.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_syscalls.o: $S/kernel/ufs_syscalls.c
|
||||
${COMPILE_C}
|
||||
|
||||
ufs_syscalls2.o: $S/kernel/ufs_syscalls2.c
|
||||
${COMPILE_C}
|
||||
|
||||
vfs_vnops.o: $S/kernel/vfs_vnops.c
|
||||
${COMPILE_C}
|
||||
|
||||
vm_sched.o: $S/kernel/vm_sched.c
|
||||
${COMPILE_C}
|
||||
|
||||
vm_swap.o: $S/kernel/vm_swap.c
|
||||
${COMPILE_C}
|
||||
|
||||
vm_swp.o: $S/kernel/vm_swp.c
|
||||
${COMPILE_C}
|
||||
|
||||
adc.o: $S/pic32/adc.c
|
||||
${COMPILE_C}
|
||||
|
||||
clock.o: $S/pic32/clock.c
|
||||
${COMPILE_C}
|
||||
|
||||
cons.o: $S/pic32/cons.c
|
||||
${COMPILE_C}
|
||||
|
||||
devsw.o: $S/pic32/devsw.c
|
||||
${COMPILE_C}
|
||||
|
||||
exception.o: $S/pic32/exception.c
|
||||
${COMPILE_C}
|
||||
|
||||
gpio.o: $S/pic32/gpio.c
|
||||
${COMPILE_C}
|
||||
|
||||
machdep.o: $S/pic32/machdep.c
|
||||
${COMPILE_C}
|
||||
|
||||
mem.o: $S/pic32/mem.c
|
||||
${COMPILE_C}
|
||||
|
||||
pwm.o: $S/pic32/pwm.c
|
||||
${COMPILE_C}
|
||||
|
||||
rd_sd.o: $S/pic32/rd_sd.c
|
||||
${COMPILE_C}
|
||||
|
||||
signal.o: $S/pic32/signal.c
|
||||
${COMPILE_C}
|
||||
|
||||
spi.o: $S/pic32/spi.c
|
||||
${COMPILE_C}
|
||||
|
||||
spi_bus.o: $S/pic32/spi_bus.c
|
||||
${COMPILE_C}
|
||||
|
||||
swap.o: $S/pic32/swap.c
|
||||
${COMPILE_C}
|
||||
|
||||
sysctl.o: $S/pic32/sysctl.c
|
||||
${COMPILE_C}
|
||||
|
||||
usb_device.o: $S/pic32/usb_device.c
|
||||
${COMPILE_C}
|
||||
|
||||
usb_function_cdc.o: $S/pic32/usb_function_cdc.c
|
||||
${COMPILE_C}
|
||||
|
||||
usb_uart.o: $S/pic32/usb_uart.c
|
||||
${COMPILE_C}
|
||||
|
||||
|
||||
LDSCRIPT = ../../../tools/configsys/../../sys/pic32/cfg/bootloader.ld
|
||||
|
||||
CONFIG = STARTER-KIT
|
||||
CONFIGPATH = ../../../tools/configsys
|
||||
|
||||
include ../../../tools/configsys/../../sys/pic32/kernel-post.mk
|
||||
ifeq (.deps, $(wildcard .deps))
|
||||
-include .deps/*.dep
|
||||
endif
|
||||
|
||||
Reference in New Issue
Block a user