#
# 4D Systems Picadillo-35T board
# ==============================
# Console on USB UART port.
# For details, see http://www.4dsystems.com.au/product/Picadillo_35T/
#
# To build the kernel, use:
#   cd sys/pic32/picadillo
#   kconfig Config
#   make clean
#   make
#
# Format of this file is described on page:
# http://retrobsd.org/wiki/doku.php/doc/kconfig
#
architecture    "pic32"
cpu             "PIC32MX7"                  # Processor variant
board           "PICADILLO_35T"             # Board type
ldscript        "max32/bootloader.ld"       # Linker script

# Standard system options
options         "CPU_KHZ=80000"             # Oscillator frequency of CPU core
options         "BUS_KHZ=80000"             # Frequency of peripheral bus
options         "BUS_DIV=1"                 # Bus clock divisor 1/2/4/8

# Root filesystem at /dev/sd0a, swap at /dev/sd0b
config          unix    root on sd0a
                        swap on sd0b

# Serial UART ports
device          uart1                       # Serial-to-USB converter

# Console options
options         "CONS_MAJOR=UART_MAJOR"     # UART device
options         "CONS_MINOR=0"              # /dev/tty0

# SPI ports
controller      spi2                        # SD card
controller      spi4                        # SPI header

# microSD card
device          sd0     at spi2 pin RG9     # select pin
options         "SD_MHZ=10"                 # speed 10 MHz

# General purpose I/O ports
# Flags define a mask of available pins
device          gpio0   flags 0xc6fd        # port A
device          gpio1   flags 0x4fff        # port B
device          gpio2   flags 0x0010        # port C
device          gpio3   flags 0xcf0f        # port D
device          gpio4   flags 0x0300        # port E
device          gpio5   flags 0x110c        # port F
device          gpio6   flags 0xf000        # port G

# ADC driver
device          adc

# PWM driver
device          pwm

# HX8357 TFT display driver
device          hxtft