#
# 4D Systems Picadillo-35T board
# ==============================
# Console on USB UART port.
# For details, see http://www.4dsystems.com.au/product/Picadillo_35T/
#
# To build the kernel, use:
#   cd sys/pic32/picadillo
#   kconfig Config
#   make clean
#   make
#
# Format of this file is described on page:
# http://retrobsd.org/wiki/doku.php/doc/kconfig
#
architecture    "pic32"
cpu             "PIC32MX7"                  # Processor variant
board           "PICADILLO_35T"             # Board type
ldscript        "cfg/bootloader-max32.ld"   # Linker script

# Standard system options
options         "CPU_KHZ=80000"             # Oscillator frequency of CPU core
options         "BUS_KHZ=80000"             # Frequency of peripheral bus
options         "BUS_DIV=1"                 # Bus clock divisor 1/2/4/8

# Root filesystem at /dev/sd0a, swap at /dev/sd0b
config          unix    root on sd0a
                        swap on sd0b

# Serial UART ports
device          uart1                       # Serial-to-USB converter
options         "UART1_ENABLED"             # TODO: delete this option

# Console options
options         "CONSOLE_DEVICE=tty0"       # /dev/tty0

# SPI ports
controller      spi2                        # SD card
options         "SPI_ENABLED"               # TODO: delete this option

# microSD card
disk            sd0     at spi2 flags 0x79  # select pin RG9
options         "SD0_MHZ=10"                # speed 10 MHz
options         "SD0_PORT=2"                # at spi2               TODO: delete
options         "SD0_CS_PORT=TRISG"         # for chip select...    TODO: use flags
options         "SD0_CS_PIN=9"              # ...use pin RG9        TODO: use flags

# General purpose I/O ports
device          gpio0
options         "GPIO_ENABLED"              # TODO: delete this option

# ADC driver
device          adc0
options         "ADC_ENABLED"               # TODO: delete this option

# PWM driver
device          pwm0
options         "PWM_ENABLED"               # TODO: delete this option

# HX8357 TFT display driver
device          hxtft0
options         "HX8357_ENABLED"            # TODO: delete this option