72 lines
2.2 KiB
Plaintext
72 lines
2.2 KiB
Plaintext
#
|
|
# chipKIT Max32 board with SD card shield
|
|
# =======================================
|
|
# For details, see https://github.com/RetroBSD/retrobsd/wiki/Board-chipKIT-Max32
|
|
#
|
|
# To build the kernel, use:
|
|
# cd sys/pic32/max32
|
|
# kconfig Config
|
|
# make clean
|
|
# make
|
|
#
|
|
# Format of this file is described on page:
|
|
# http://retrobsd.org/wiki/doku.php/doc/kconfig
|
|
#
|
|
architecture "pic32"
|
|
cpu "PIC32MX7" # Processor variant
|
|
board "MAX32" # Board type
|
|
ldscript "max32/bootloader.ld" # Linker script
|
|
|
|
# Standard system options
|
|
options "CPU_KHZ=80000" # Oscillator frequency of CPU core
|
|
options "BUS_KHZ=80000" # Frequency of peripheral bus
|
|
options "BUS_DIV=1" # Bus clock divisor 1/2/4/8
|
|
|
|
# LED
|
|
signal "LED_KERNEL" pin RA3 # kernel activity indicator
|
|
|
|
# Root filesystem at /dev/sd0a, swap at /dev/sd0b
|
|
config unix root on sd0a
|
|
swap on sd0b
|
|
|
|
# Serial UART ports
|
|
# Cannot use uart3, as it conflicts with spi2
|
|
device uart1 # Serial-to-USB converter
|
|
device uart2
|
|
device uart4
|
|
|
|
# Use UART1 as console
|
|
options "CONS_MAJOR=UART_MAJOR" # UART device
|
|
options "CONS_MINOR=0" # /dev/tty0
|
|
|
|
# SPI ports
|
|
controller spi2 # SD card
|
|
|
|
# microSD card
|
|
device sd0 at spi2 pin RC14 # select pin
|
|
options "SD0_MHZ=10" # speed 10 MHz
|
|
|
|
# General purpose I/O ports
|
|
# Flags define a mask of available pins
|
|
# The following pins excluded:
|
|
# RF2, RF8 - uart1
|
|
# RF4, RF5 - uart2
|
|
# RD14, RD15 - uart4
|
|
# RG6, RG7, RG8, RC14 - spi2, SD card
|
|
device gpio0 flags 0xc6ff # port A
|
|
device gpio1 flags 0xffff # port B
|
|
device gpio2 flags 0xb01e # port C
|
|
device gpio3 flags 0x3fff # port D
|
|
device gpio4 flags 0x03ff # port E
|
|
device gpio5 flags 0x300b # port F
|
|
device gpio6 flags 0xf20f # port G
|
|
|
|
# ADC driver
|
|
device adc
|
|
|
|
# PWM driver
|
|
device pwm
|
|
|
|
# Skeleton driver
|
|
#device skel
|