RetroBSD is a version of 2.11BSD Unix for microcontrollers.
It can run on PIC32 in only 128 kbytes of RAM. The operating
system includes not only a set of basic Unix utilities, but also
a C compiler, assembler, linker, libraries and include files
sufficient to develop user applications directly on the target
processor. Cross-compile is possible as well.
Files in this package:
unix.hex - Unix kernel image
unix.dis - Disassembly of the kernel image, for debugging
sdcard.img - Root filesystem image
pic32prog.exe - PIC32 programmer utility for Windows
linux32/pic32prog - PIC32 programmer utility for 32-bit Linux
linux64/pic32prog - PIC32 programmer utility for 64-bit Linux
macos/pic32prog - PIC32 programmer utility for Mac OS X
pic32prog.txt - Brief description of pic32prog utility
README.txt - This file
The installation of RetroBSD to your board consists of
three steps:
(1) Transfer the Unix kernel to the board
(2) Put the filesystem image on to a SD card
(3) Connect to the console port and start RetroBSD
Transfer the Unix kernel on to the board
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Connect the board via microUSB cable to your computer. To enter
a bootloader mode, press the PRG key first, hold it, then press
the RESET key. The LED will now flash and your board is ready
to accept new code. Use pic32prog utility to program the flash
code. The bootloader can appear as a HID device, or as a virtual
serial port (COM port) on your computer, depending on your
board type.
Boards which use HID bootloader: Maximite, Color Maximite,
Duinomite, CGMMSTICK1. For these boards you do not need to
specify the -d option and device name.
Boards which use a virtual serial port for bootloader: Fubarino
SD, chipKIT Max32, Picadillo 35T, Majenko SDXL. For these
boards you need to know the exact device name to specify for
pic32prog (typically /dev/ACM0 on Linux, something like COM12
on Windows, /dev/tty.usbmodemfa131 on Mac OS X).
Use proper pic32prog binary for your operating system:
pic32prog.exe - for Windows
linux32/pic32prog - for 32-bit Linux
linux64/pic32prog - for 64-bit Linux
macos/pic32prog - for Mac OS X
Unpack the package and run command (say, for 64-bit Linux):
linux64/pic32prog -d /dev/ttyACM0 unix.hex
For Windows, it should be like:
pic32prog -d COM12 unix.hex
On Mac OS X:
macosx/pic32prog -d /dev/tty.usbmodemfa131 unix.hex
You should see:
Programmer for Microchip PIC32 microcontrollers, Version 1.112
Copyright: (C) 2011-2014 Serge Vakulenko
Adapter: STK500v2 Bootloader
Program area: 1d000000-1d07ffff
Processor: Bootloader
Flash memory: 512 kbytes
Data: 153384 bytes
Erase: done
Program flash: ###################################### done
Verify flash: ###################################### done
Rate: 9307 bytes per second
Put the filesystem image on to a SD card
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use any USB-to-SD card reader to attach the SD card to your PC.
On Windows, use Win32DiskImager utility. On Linux or Mac OS X,
run:
sudo dd bs=32k if=sdcard.img of=/dev/XYZ
where XYZ is a name of SD card on your computer (use lsblk or
"diskutil list" to obtain).
Once that is done remove the SD card from card reader and plug
it into SD slot on your board. The RetroBSD system is ready
to run.
Connect to the console port and start RetroBSD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Connect USB cable to the board and to your computer. The RetroBSD
console will appear as a virtual COM port on your computer. Use
any terminal emulation program (like putty on Windows or
minicom on Linux) to connect to this virtual COM port at baud
rate 115200. Press <Enter> to start RetroBSD. On Login prompt,
enter "root". Password is empty:
2.11 BSD Unix for PIC32, revision G226 build 1:
Compiled 2015-05-19 by vak@tundra.local:
/Users/vak/retrobsd-github/sys/pic32/fubarino
cpu: 795F512H 80 MHz, bus 80 MHz
oscillator: HS crystal, PLL div 1:2 mult x20
console: ttyUSB0 (5,0)
sd0: port SPI2, select pin G9
sd0: type SDHC, size 3914752 kbytes, speed 13 Mbit/sec
phys mem = 128 kbytes
user mem = 96 kbytes
root dev = rd0a (0,1)
root size = 102400 kbytes
swap dev = rd0b (0,2)
swap size = 2048 kbytes
/dev/rd0a: 690 files, 10880 used, 91119 free
Starting daemons: update cron
2.11 BSD UNIX (pic32) (console)
login: root
Password:
Welcome to RetroBSD!
erase, kill ^U, intr ^C
# _
