This is the right 3.1.3a.

updated directory size after new directory entries are added. To
be fixed.

commands/ibm/autopart.c

@@ -63,9 +63,6 @@ int min_region_mb = 500;
 
 #define MIN_REGION_SECTORS (1024*1024*min_region_mb/SECTOR_SIZE)
 
-#define MAX_REGION_MB	4095
-#define MAX_REGION_SECTORS (1024*(1024/SECTOR_SIZE)*MAX_REGION_MB)
-
 #define arraysize(a)	(sizeof(a) / sizeof((a)[0]))
 #define arraylimit(a)	((a) + arraysize(a))
 
@@ -339,7 +336,7 @@ void newdevice(char *name, int scanning, int disk_only)
 	if (curdev->rdev != DEV_C0D0) curdev= firstdev;
 }
 
-void getdevices()
+void getdevices(void)
 /* Get all block devices from /dev that look interesting. */
 {
 	DIR *d;
@@ -2154,18 +2151,8 @@ scribble_region(region_t *reg, struct part_entry **pe, int *made_new)
 {
 	int ex, changed = 0, i;
 	struct part_entry *newpart;
-	if(reg->is_used_part && reg->used_part.size > MAX_REGION_SECTORS) {
-		reg->used_part.size = MAX_REGION_SECTORS;
-		changed = 1;
-		cylinderalign(reg);
-	}
 	if(!reg->is_used_part) {
 		ex = reg->free_sec_last - reg->free_sec_start + 1;
-		if(ex > MAX_REGION_SECTORS) {
-			reg->free_sec_last -= ex - MAX_REGION_SECTORS;
-			changed = 1;
-			cylinderalign(reg);
-		}
 		if(made_new) *made_new = 1;
 	} else if(made_new) *made_new = 0;
 	if(!reg->is_used_part) {

commands/scripts/setup.sh

@@ -246,7 +246,6 @@ do
 		echo -n "
 MINIX needs one primary partition of $TOTALMB MB for a full install,
 plus what you want for /home.
-The maximum file system currently supported is 4 GB.
 
 If there is no free space on your disk then you have to choose an option:
    (1) Delete one or more partitions

commands/simple/mkfs.c

@@ -233,8 +233,7 @@ char *argv[];
   	 * reporting a 0-sized device (displays usage).
   	 */
   	if(blocks < 1) {
-  		fprintf(stderr, "%s: this device can't hold a filesystem.\n",
-  			progname);
+  		fprintf(stderr, "%s: zero size device.\n", progname);
   		return 1;
   	}
   }
@@ -451,6 +450,7 @@ ino_t inodes;
   unsigned int i;
   int inodeblks;
   int initblks;
+  zone_t zi, zz, zd;
 
   zone_t initzones, nrzones, v1sq, v2sq;
   zone_t zo;
@@ -469,14 +469,14 @@ ino_t inodes;
 	sup->s_nzones = 0;	/* not used in V2 - 0 forces errors early */
 	sup->s_zones = zones;
   }
-  sup->s_imap_blocks = bitmapsize((bit_t) (1 + inodes), block_size);
-  sup->s_zmap_blocks = bitmapsize((bit_t) zones, block_size);
+  sup->s_imap_blocks = zi = bitmapsize((bit_t) (1 + inodes), block_size);
+  sup->s_zmap_blocks = zz = bitmapsize((bit_t) zones, block_size);
   inode_offset = sup->s_imap_blocks + sup->s_zmap_blocks + 2;
   inodeblks = (inodes + inodes_per_block - 1) / inodes_per_block;
   initblks = inode_offset + inodeblks;
   initzones = (initblks + (1 << zone_shift) - 1) >> zone_shift;
   nrzones = nrblocks >> zone_shift;
-  sup->s_firstdatazone = (initblks + (1 << zone_shift) - 1) >> zone_shift;
+  sup->s_firstdatazone = zd = (initblks + (1 << zone_shift) - 1) >> zone_shift;
   zoff = sup->s_firstdatazone - 1;
   sup->s_log_zone_size = zone_shift;
   if (fs_version == 1) {
@@ -504,6 +504,16 @@ ino_t inodes;
 	}
   }
 
+  /* checks for size */
+  if(zi != sup->s_imap_blocks || sup->s_zmap_blocks != zz) {
+  	fprintf(stderr, "imap blocks or zmap blocks fields too small?\n");
+	exit(1);
+  }
+  if(sup->s_firstdatazone != zd) {
+  	fprintf(stderr, "firstdatazone field too small?\n");
+	exit(1);
+  }
+
   zone_size = 1 << zone_shift;	/* nr of blocks per zone */
 
   if (lseek(fd, (off_t) _STATIC_BLOCK_SIZE, SEEK_SET) == (off_t) -1) {

commands/simple/readall.c

@@ -124,8 +124,8 @@ char *argv[];
   /* Read the entire file. Try it in large chunks, but if an error
    * occurs, go to single reads for a while. */
   while (1) {
-	if(lseek(fd, BLOCK_SIZE * b, SEEK_SET) < 0) {
-		perror("lseek");
+	if(lseek64(fd, mul64u(BLOCK_SIZE, b), SEEK_SET, NULL) < 0) {
+		perror("lseek64");
 		return 1;
 	}
 	s = read(fd, a, BLOCK_SIZE * chunk);

drivers/at_wini/at_wini.c

@@ -1026,7 +1026,7 @@ PRIVATE int w_identify()
 #endif
 	}
 
-	if (wn->lcylinders == 0) {
+	if (wn->lcylinders == 0 || wn->lheads == 0 || wn->lsectors == 0) {
 		/* No BIOS parameters?  Then make some up. */
 		wn->lcylinders = wn->pcylinders;
 		wn->lheads = wn->pheads;

drivers/dp8390/rtl8029.c

@@ -37,10 +37,12 @@ PRIVATE struct pcitab
 };
 
 _PROTOTYPE( static void rtl_init, (struct dpeth *dep)			);
+#if 0
 _PROTOTYPE( static u16_t get_ee_word, (dpeth_t *dep, int a)		);
 _PROTOTYPE( static void ee_wen, (dpeth_t *dep)				);
 _PROTOTYPE( static void set_ee_word, (dpeth_t *dep, int a, U16_t w)	);
 _PROTOTYPE( static void ee_wds, (dpeth_t *dep)				);
+#endif
 _PROTOTYPE( static void micro_delay, (unsigned long usecs)		);
 
 PUBLIC int rtl_probe(dep)
@@ -79,7 +81,7 @@ struct dpeth *dep;
 
 	for(;;)
 	{
-		for (i= 0; pcitab[i].vid != 0; i++)
+		for (i= 0; pcitab[i].vid != 0 || pcitab[i].did != 0; i++)
 		{
 			if (pcitab[i].vid != vid)
 				continue;
@@ -93,7 +95,7 @@ struct dpeth *dep;
 			}
 			break;
 		}
-		if (pcitab[i].vid != 0)
+		if (pcitab[i].vid != 0 || pcitab[i].did != 0)
 			break;
 
 		if (just_one)
@@ -116,7 +118,8 @@ struct dpeth *dep;
 		dname= "unknown device";
 	printf("%s: %s (%04X/%04X) at %s\n",
 		dep->de_name, dname, vid, did, pci_slot_name(devind));
-	pci_reserve(devind);
+        if(pci_reserve_ok(devind) != OK)
+               return 0;
 	/* printf("cr = 0x%x\n", pci_attr_r16(devind, PCI_CR)); */
 	bar= pci_attr_r32(devind, PCI_BAR) & 0xffffffe0;
 
@@ -199,6 +202,7 @@ dpeth_t *dep;
 	printf("\n");
 #endif
 
+#if 0
 	if (getenv("RTL8029MN"))
 	{
 		ee_wen(dep);
@@ -226,8 +230,10 @@ dpeth_t *dep;
 
 		assert(get_ee_word(dep, 0x76/2) == 0x8029);
 	}
+#endif
 }
 
+#if 0
 static u16_t get_ee_word(dep, a)
 dpeth_t *dep;
 int a;
@@ -365,6 +371,7 @@ dpeth_t *dep;
 	outb_reg3(dep, 1, 0x00);		/* back to normal */
 	outb_reg0(dep, DP_CR, CR_PS_P0);	/* back to bank 0 */
 }
+#endif
 
 static void micro_delay(unsigned long usecs)
 {

drivers/memory/memory.c

@@ -148,7 +148,8 @@ int safe;			/* safe copies */
 	return EPERM;
   }
 
-  if (ex64hi(pos64) != 0)
+  /* ZERO_DEV and NULL_DEV are infinite in size. */
+  if (m_device != ZERO_DEV && m_device != NULL_DEV && ex64hi(pos64) != 0)
 	return OK;	/* Beyond EOF */
   position= cv64ul(pos64);
 

drivers/pci/main.c

@@ -140,10 +140,8 @@ message *mp;
 	{
 		/* Ignore all init calls for a process after the first one */
 	}
-#if 0
 	else
 		pci_release(names[i].name);
-#endif
 	names[i].tasknr= mp->m_source;
 
 	mp->m_type= 0;

drivers/pci/pci.c

@@ -387,7 +387,6 @@ char *name;
 	return OK;
 }
 
-#if 0
 /*===========================================================================*
  *				pci_release				     *
  *===========================================================================*/
@@ -405,7 +404,6 @@ char *name;
 		pcidev[i].pd_inuse= 0;
 	}
 }
-#endif
 
 /*===========================================================================*
  *				pci_ids					     *

etc/binary_sizes

@@ -5,5 +5,5 @@
 /usr/lib/em_opt 208000
 /usr/lib/i386/as 55000
 /usr/lib/i386/cg 50655
-/bin/sh 102400
-/usr/bin/make 337920
+/bin/sh 142400                                                                                      
+/usr/bin/make 380000                                                                                

etc/drivers.conf

@@ -93,6 +93,7 @@ driver is
 		GETINFO		# 26
 		SETGRANT	# 34
 	;
+	uid	0;
 };
 
 driver pci
@@ -155,3 +156,27 @@ driver mfs
 		;
 	uid	0;
 };
+
+driver printer
+{
+	io	408:2		# LPT1
+		40a:2		# LPT2
+		40c:2		# LPT3
+		40e:2		# LPT4
+	;
+	irq
+		7		# PRINTER_IRQ
+	;
+	system
+		KILL		#  6
+		SETGRANT	# 34
+		UMAP		# 14
+		VIRCOPY		# 15
+		IRQCTL		# 19
+		DEVIO		# 21
+		VDEVIO		# 23
+		SAFECOPYFROM	# 31
+		SAFECOPYTO	# 32
+	;
+};
+

etc/usr/rc

@@ -135,7 +135,8 @@ start)
     	    echo -n "Starting networking:"
 	    if grep -s 'psip0.*default' /etc/inet.conf 
 	    then	ifconfig -h 10.0.0.1
-	    else	daemonize dhcpd
+	    else	sleep 5
+			daemonize dhcpd
 	    fi
 	    daemonize nonamed -L
 	    if [ -f "$DAEMONS" ]

include/minix/config.h

@@ -3,7 +3,7 @@
 
 /* Minix release and version numbers. */
 #define OS_RELEASE "3"
-#define OS_VERSION "1.3"
+#define OS_VERSION "1.3a"
 
 /* This file sets configuration parameters for the MINIX kernel, FS, and PM.
  * It is divided up into two main sections.  The first section contains

kernel/system/do_copy.c

@@ -30,6 +30,7 @@ register message *m_ptr;	/* pointer to request message */
   phys_bytes bytes;		/* number of bytes to copy */
   int i;
 
+#if 0
   if (m_ptr->m_source != 0 && m_ptr->m_source != 1 &&
 	m_ptr->m_source != 2 && m_ptr->m_source != 3)
   {
@@ -46,6 +47,7 @@ register message *m_ptr;	/* pointer to request message */
 			m_ptr->CP_DST_SPACE);
 	}
   }
+#endif
 
   /* Dismember the command message. */
   vir_addr[_SRC_].proc_nr_e = m_ptr->CP_SRC_ENDPT;

servers/is/dmp_pm.c

@@ -20,7 +20,7 @@ PUBLIC struct mproc mproc[NR_PROCS];
  *===========================================================================*/
 PRIVATE char *flags_str(int flags)
 {
-	static char str[10];
+	static char str[13];
 	str[0] = (flags & WAITING) ? 'W' : '-';
 	str[1] = (flags & ZOMBIE)  ? 'Z' : '-';
 	str[2] = (flags & PAUSED)  ? 'P' : '-';

servers/mfs/link.c

@@ -350,12 +350,10 @@ PUBLIC int fs_rename()
 			}
 			next_new_superdirp = advance(&new_superdirp, dot2);
 			put_inode(new_superdirp);
-			/*
 			if (next_new_superdirp == new_superdirp) {
 				put_inode(new_superdirp);
 				break;	
 			}
-			*/
 			if (err_code == ELEAVEMOUNT) {
 				/* imitate that we are back at the root,
 				 * cross device checked already on VFS */

servers/rs/manager.c

@@ -82,7 +82,7 @@ int flags;					/* extra flags, if any */
    * arguments vector is: path, arguments, NULL. 
    */
   arg_count = 0;				/* initialize arg count */
-  rp->r_argv[arg_count++] = rp->r_cmd;		/* start with path */
+  rp->r_file = rp->r_argv[arg_count++] = rp->r_cmd;	/* start with path */
   cmd_ptr = rp->r_cmd;				/* do some parsing */ 
   while(*cmd_ptr != '\0') {			/* stop at end of string */
       if (*cmd_ptr == ' ') {			/* next argument */
@@ -184,7 +184,7 @@ message *m_ptr;					/* request message pointer */
    * arguments vector is: path, arguments, NULL. 
    */
   arg_count = 0;				/* initialize arg count */
-  rp->r_argv[arg_count++] = rp->r_cmd;		/* start with path */
+  rp->r_file = rp->r_argv[arg_count++] = rp->r_cmd;	/* start with path */
   cmd_ptr = rp->r_cmd;				/* do some parsing */ 
   while(*cmd_ptr != '\0') {			/* stop at end of string */
       if (*cmd_ptr == ' ') {			/* next argument */
@@ -720,8 +720,9 @@ endpoint_t *endpoint;
       setuid(rp->r_uid);
       if (!use_copy)
       {
-	execve(rp->r_argv[0], rp->r_argv, NULL);	/* POSIX execute */
-	file_only = strrchr(rp->r_argv[0], '/') + 1;
+	rp->r_argv[0] = rp->r_label;
+	execve(rp->r_file, rp->r_argv, NULL);	/* POSIX execute */
+	file_only = strrchr(rp->r_file, '/') + 1;
 	execve(file_only, rp->r_argv, NULL);		/* POSIX execute */
       }
       printf("RS: exec failed for %s: %d\n", rp->r_argv[0], errno);

servers/rs/manager.h

@@ -42,6 +42,7 @@ extern struct rproc {
   char r_cmd[MAX_COMMAND_LEN];	/* raw command plus arguments */
   char r_script[MAX_SCRIPT_LEN]; /* name of the restart script executable */
   char *r_argv[MAX_NR_ARGS+2];  /* parsed arguments vector */
+  char *r_file;                 /* path to binary to exec */
   int r_argc;  			/* number of arguments */
 
   /* Resources */

servers/vfs/const.h

@@ -86,7 +86,6 @@
 
 #define DIR_ENTRY_SIZE       usizeof (struct direct)  /* # bytes/dir entry   */
 #define NR_DIR_ENTRIES(b)   ((b)/DIR_ENTRY_SIZE)  /* # dir entries/blk   */
-#define SUPER_SIZE      usizeof (struct super_block)  /* super_block size    */
 #define PIPE_SIZE(b)          (V1_NR_DZONES*(b))  /* pipe size in bytes  */
 
 #define FS_BITMAP_CHUNKS(b) ((b)/usizeof (bitchunk_t))/* # map chunks/blk   */

servers/vfs/device.c

@@ -37,7 +37,7 @@
 
 FORWARD _PROTOTYPE( int safe_io_conversion, (endpoint_t,
   cp_grant_id_t *, int *, cp_grant_id_t *, int, endpoint_t *,
-  void **, int *, vir_bytes, off_t *));
+  void **, int *, vir_bytes, u32_t *));
 FORWARD _PROTOTYPE( void safe_io_cleanup, (cp_grant_id_t, cp_grant_id_t *,
 	int));
 
@@ -170,7 +170,7 @@ PUBLIC void dev_status(message *m)
  *				safe_io_conversion			     *
  *===========================================================================*/
 PRIVATE int safe_io_conversion(driver, gid, op, gids, gids_size,
-	io_ept, buf, vec_grants, bytes, pos)
+	io_ept, buf, vec_grants, bytes, pos_lo)
 endpoint_t driver;
 cp_grant_id_t *gid;
 int *op;
@@ -180,7 +180,7 @@ endpoint_t *io_ept;
 void **buf;
 int *vec_grants;
 vir_bytes bytes;
-off_t *pos;
+u32_t *pos_lo;
 {
 	int access = 0, size;
 	int j;
@@ -242,7 +242,7 @@ off_t *pos;
 			*buf = new_iovec;
 			break;
 		case VFS_DEV_IOCTL:
-			*pos = *io_ept;	/* Old endpoint in POSITION field. */
+			*pos_lo = *io_ept; /* Old endpoint in POSITION field. */
 			*op = DEV_IOCTL_S;
 			if(_MINIX_IOCTL_IOR(m_in.REQUEST)) access |= CPF_WRITE;
 			if(_MINIX_IOCTL_IOW(m_in.REQUEST)) access |= CPF_READ;
@@ -303,6 +303,7 @@ int gids_size;
 	return;
 }
 
+#if 0
 /*===========================================================================*
  *				dev_bio					     *
  *===========================================================================*/
@@ -420,22 +421,23 @@ int bytes;			/* how many bytes to transfer */
 	return(m.REP_STATUS);
   }
 }
+#endif
 
 /*===========================================================================*
  *				dev_io					     *
  *===========================================================================*/
-PUBLIC int dev_io(op, dev, proc_e, buf, posX, bytes, flags)
+PUBLIC int dev_io(op, dev, proc_e, buf, pos, bytes, flags)
 int op;				/* DEV_READ, DEV_WRITE, DEV_IOCTL, etc. */
 dev_t dev;			/* major-minor device number */
 int proc_e;			/* in whose address space is buf? */
 void *buf;			/* virtual address of the buffer */
-u64_t posX;			/* byte position */
+u64_t pos;			/* byte position */
 int bytes;			/* how many bytes to transfer */
 int flags;			/* special flags, like O_NONBLOCK */
 {
 /* Read or write from a device.  The parameter 'dev' tells which one. */
   struct dmap *dp;
-  off_t pos;
+  u32_t pos_lo, pos_high;
   message dev_mess;
   cp_grant_id_t gid = GRANT_INVALID;
   static cp_grant_id_t gids[NR_IOREQS];
@@ -443,9 +445,8 @@ int flags;			/* special flags, like O_NONBLOCK */
   void *buf_used;
   endpoint_t ioproc;
 
-  if (ex64hi(posX) != 0)
-	panic(__FILE__, "dev_io: postition too high", NO_NUM);
-  pos= ex64lo(posX);
+  pos_lo= ex64lo(pos);
+  pos_high= ex64hi(pos);
 
   /* Determine task dmap. */
   dp = &dmap[(dev >> MAJOR) & BYTE];
@@ -471,7 +472,7 @@ int flags;			/* special flags, like O_NONBLOCK */
   buf_used = buf;
   safe = safe_io_conversion(dp->dmap_driver, &gid,
     &op, gids, NR_IOREQS, &dev_mess.IO_ENDPT, &buf_used,
-    &vec_grants, bytes, &pos);
+    &vec_grants, bytes, &pos_lo);
 
   if(buf != buf_used)
 	panic(__FILE__,"dev_io: safe_io_conversion changed buffer", NO_NUM);
@@ -484,9 +485,9 @@ int flags;			/* special flags, like O_NONBLOCK */
   /* Set up the rest of the message passed to task. */
   dev_mess.m_type   = op;
   dev_mess.DEVICE   = (dev >> MINOR) & BYTE;
-  dev_mess.POSITION = pos;
+  dev_mess.POSITION = pos_lo;
   dev_mess.COUNT    = bytes;
-  dev_mess.HIGHPOS  = 0;
+  dev_mess.HIGHPOS  = pos_high;
 
   /* This will be used if the i/o is suspended. */
   ioproc = dev_mess.IO_ENDPT;

servers/vfs/inode.h

@@ -1,44 +0,0 @@
-/* Inode table.  This table holds inodes that are currently in use.  In some
- * cases they have been opened by an open() or creat() system call, in other
- * cases the file system itself needs the inode for one reason or another,
- * such as to search a directory for a path name.
- * The first part of the struct holds fields that are present on the
- * disk; the second part holds fields not present on the disk.
- * The disk inode part is also declared in "type.h" as 'd1_inode' for V1
- * file systems and 'd2_inode' for V2 file systems.
- */
-
-EXTERN struct inode {
-  mode_t i_mode;		/* file type, protection, etc. */
-  nlink_t i_nlinks;		/* how many links to this file */
-  uid_t i_uid;			/* user id of the file's owner */
-  gid_t i_gid;			/* group number */
-  off_t i_size;			/* current file size in bytes */
-  time_t i_atime;		/* time of last access (V2 only) */
-  time_t i_mtime;		/* when was file data last changed */
-  time_t i_ctime;		/* when was inode itself changed (V2 only)*/
-  zone_t i_zone[V2_NR_TZONES]; /* zone numbers for direct, ind, and dbl ind */
-  
-  /* The following items are not present on the disk. */
-  dev_t i_dev;			/* which device is the inode on */
-  ino_t i_num;			/* inode number on its (minor) device */
-  int i_count;			/* # times inode used; 0 means slot is free */
-  int i_ndzones;		/* # direct zones (Vx_NR_DZONES) */
-  int i_nindirs;		/* # indirect zones per indirect block */
-  struct super_block *i_sp;	/* pointer to super block for inode's device */
-  char i_dirt;			/* CLEAN or DIRTY */
-  char i_pipe;			/* set to I_PIPE if pipe */
-  char i_mount;			/* this bit is set if file mounted on */
-  char i_seek;			/* set on LSEEK, cleared on READ/WRITE */
-  char i_update;		/* the ATIME, CTIME, and MTIME bits are here */
-} inode[NR_INODES];
-
-#define NIL_INODE (struct inode *) 0	/* indicates absence of inode slot */
-
-/* Field values.  Note that CLEAN and DIRTY are defined in "const.h" */
-#define NO_PIPE            0	/* i_pipe is NO_PIPE if inode is not a pipe */
-#define I_PIPE             1	/* i_pipe is I_PIPE if inode is a pipe */
-#define NO_MOUNT           0	/* i_mount is NO_MOUNT if file not mounted on*/
-#define I_MOUNT            1	/* i_mount is I_MOUNT if file mounted on */
-#define NO_SEEK            0	/* i_seek = NO_SEEK if last op was not SEEK */
-#define ISEEK              1	/* i_seek = ISEEK if last op was SEEK */

servers/vfs/main.c

@@ -319,8 +319,10 @@ PRIVATE void init_root()
   last_login_fs_e = NONE;
   
   /* Initialize vmnt table */
-  for (vmp = &vmnt[0]; vmp < &vmnt[NR_MNTS]; ++vmp)
+  for (vmp = &vmnt[0]; vmp < &vmnt[NR_MNTS]; ++vmp) {
       vmp->m_dev = NO_DEV;
+      vmp->m_fs_e = NONE;
+  }
   
   vmp = &vmnt[0];
  
@@ -411,7 +413,7 @@ PRIVATE void service_pm()
                        
                         /* Send new time for all FS processes */
                         for (vmp = &vmnt[0]; vmp < &vmnt[NR_MNTS]; ++vmp) { 
-                            if (vmp->m_fs_e)
+                            if (vmp->m_fs_e != NONE)
                                 req_stime(vmp->m_fs_e, boottime);
                         }
 			/* No need to report status to PM */

servers/vfs/super.h

@@ -1,59 +0,0 @@
-/* Super block table.  The root file system and every mounted file system
- * has an entry here.  The entry holds information about the sizes of the bit
- * maps and inodes.  The s_ninodes field gives the number of inodes available
- * for files and directories, including the root directory.  Inode 0 is 
- * on the disk, but not used.  Thus s_ninodes = 4 means that 5 bits will be
- * used in the bit map, bit 0, which is always 1 and not used, and bits 1-4
- * for files and directories.  The disk layout is:
- *
- *    Item        # blocks
- *    boot block      1
- *    super block     1    (offset 1kB)
- *    inode map     s_imap_blocks
- *    zone map      s_zmap_blocks
- *    inodes        (s_ninodes + 'inodes per block' - 1)/'inodes per block'
- *    unused        whatever is needed to fill out the current zone
- *    data zones    (s_zones - s_firstdatazone) << s_log_zone_size
- *
- * A super_block slot is free if s_dev == NO_DEV. 
- */
-
-EXTERN struct super_block {
-  ino_t s_ninodes;		/* # usable inodes on the minor device */
-  zone1_t  s_nzones;		/* total device size, including bit maps etc */
-  short s_imap_blocks;		/* # of blocks used by inode bit map */
-  short s_zmap_blocks;		/* # of blocks used by zone bit map */
-  zone1_t s_firstdatazone;	/* number of first data zone */
-  short s_log_zone_size;	/* log2 of blocks/zone */
-  short s_pad;			/* try to avoid compiler-dependent padding */
-  off_t s_max_size;		/* maximum file size on this device */
-  zone_t s_zones;		/* number of zones (replaces s_nzones in V2) */
-  short s_magic;		/* magic number to recognize super-blocks */
-
-  /* The following items are valid on disk only for V3 and above */
-
-  /* The block size in bytes. Minimum MIN_BLOCK SIZE. SECTOR_SIZE
-   * multiple. If V1 or V2 filesystem, this should be
-   * initialised to STATIC_BLOCK_SIZE. Maximum MAX_BLOCK_SIZE.
-   */
-  short s_pad2;			/* try to avoid compiler-dependent padding */
-  unsigned short s_block_size;	/* block size in bytes. */
-  char s_disk_version;		/* filesystem format sub-version */
-
-  /* The following items are only used when the super_block is in memory. */
-  struct inode *s_isup;		/* inode for root dir of mounted file sys */
-  struct inode *s_imount;	/* inode mounted on */
-  unsigned s_inodes_per_block;	/* precalculated from magic number */
-  dev_t s_dev;			/* whose super block is this? */
-  int s_rd_only;		/* set to 1 iff file sys mounted read only */
-  int s_native;			/* set to 1 iff not byte swapped file system */
-  int s_version;		/* file system version, zero means bad magic */
-  int s_ndzones;		/* # direct zones in an inode */
-  int s_nindirs;		/* # indirect zones per indirect block */
-  bit_t s_isearch;		/* inodes below this bit number are in use */
-  bit_t s_zsearch;		/* all zones below this bit number are in use*/
-} super_block[NR_SUPERS];
-
-#define NIL_SUPER (struct super_block *) 0
-#define IMAP		0	/* operating on the inode bit map */
-#define ZMAP		1	/* operating on the zone bit map */

servers/vfs/time.c

@@ -72,7 +72,7 @@ PUBLIC int do_stime()
     
   /* Send new time for all FS processes */
   for (vmp = &vmnt[0]; vmp < &vmnt[NR_MNTS]; ++vmp) { 
-      if (vmp->m_fs_e) req_stime(vmp->m_fs_e, boottime);
+      if (vmp->m_fs_e != NONE) req_stime(vmp->m_fs_e, boottime);
   }
 
   return OK;

servers/vfs/vmnt.c

@@ -3,6 +3,8 @@
  *   Jul 2006 (Balazs Gerofi)
  */
 
+#include <minix/com.h>
+
 #include "fs.h"
 #include "vmnt.h"
 
@@ -27,6 +29,8 @@ PUBLIC struct vmnt *get_free_vmnt(short *index)
 PUBLIC struct vmnt *find_vmnt(int fs_e) 
 {
   struct vmnt *vp;
+  if(fs_e == NONE)
+	panic(__FILE__, "find_vmnt: find for NONE", NO_NUM);
   for (vp = &vmnt[0]; vp < &vmnt[NR_MNTS]; ++vp) {
       if (vp->m_fs_e == fs_e) return vp;
   }

test/test23.c

@@ -131,7 +131,7 @@ void test23a()
   if (chdir(".//.//") != 0) e(39);	/* .//.// == current dir */
   if (getcwd(buf, PATH_MAX) != buf) e(40);
   if (strcmp(buf, cwd) != 0) e(41);	/* we might be at '/' */
-#ifdef _MINIX
+#if 0
   /* XXX - my_getcwd() is old rubbish.  It reads the directory directly instead
    * of through the directory library.  It uses a fixed size buffer instead of
    * a size related to PATH_MAX, NAME_MAX or the size required.

tools/release.sh

@@ -95,11 +95,13 @@ SVNREV=""
 REVTAG=""
 PACKAGES=1
 
-while getopts "pchu?r:" c
+FILENAMEOUT=""
+
+while getopts "s:pchu?r:f:" c
 do
 	case "$c" in
 	\?)
-		echo "Usage: $0 [-p] [-c] [-h] [-r <tag>] [-u]" >&2
+		echo "Usage: $0 [-p] [-c] [-h] [-r <tag>] [-u] [-f <filename>] [-s <username>]" >&2
 		exit 1
 	;;
 	h)
@@ -123,6 +125,11 @@ do
 		HDEMU=1
 		USB=1
 		;;
+	f)
+		FILENAMEOUT="$OPTARG"
+		;;
+	s)	USERNAME="--username=$OPTARG"
+		;;
 	esac
 done
 
@@ -214,7 +221,7 @@ then
 fi
 
 echo " * Cleanup old files"
-rm -rf $RELEASEDIR $IMG $IMAGE $ROOTIMAGE $IMGBZ $CDFILES image*
+rm -rf $RELEASEDIR $IMG $IMAGE $ROOTIMAGE $CDFILES image*
 mkdir -p $CDFILES || exit
 mkdir -p $RELEASEDIR
 mkfs -B $BS -b $ROOTBLOCKS $TMPDISK3 || exit
@@ -280,9 +287,9 @@ if [ "$COPY" -ne 1 ]
 then
 	echo " * Doing new svn export"
 	REPO=https://gforge.cs.vu.nl/svn/minix/trunk/$SRC
-	REVISION="`svn info $SVNREV $REPO | grep '^Revision: ' | awk '{ print $2 }'`"
+	REVISION="`svn info $USERNAME $SVNREV $REPO | grep '^Revision: ' | awk '{ print $2 }'`"
 	echo "Doing export of revision $REVISION from $REPO."
-	( cd $RELEASEDIR/usr && svn export -r$REVISION $REPO )
+	( cd $RELEASEDIR/usr && svn $USERNAME export -r$REVISION $REPO )
 	REVTAG=r$REVISION
 	echo "
 
@@ -303,8 +310,6 @@ if [ "$USB" -ne 0 ]; then
 else
 	IMG=${IMG_BASE}_${REVTAG}.iso
 fi
-IMGBZ=${IMG}.bz2
-echo "Making $IMGBZ"
 
 echo " * Fixups for owners and modes of dirs and files"
 chown -R bin $RELEASEDIR/usr/$SRC 
@@ -337,7 +342,7 @@ then
 	hdemu_root_changes
 fi
 
-echo $version_pretty >$RELEASEDIR/etc/version
+echo $version_pretty, SVN revision $SVNREV, generated `date` >$RELEASEDIR/etc/version
 echo " * Counting files"
 extrakb=`du -s $RELEASEDIR/usr/install | awk '{ print $1 }'`
 expr `df $TMPDISK | tail -1 | awk '{ print $4 }'` - $extrakb >$RELEASEDIR/.usrkb
@@ -403,3 +408,7 @@ else
 		partition -m $IMG 0 81:$isosects 81:$ROOTSECTS 81:$USRSECTS
 	fi
 fi
+
+if [ "$FILENAMEOUT" ]
+then	echo "$IMG" >$FILENAMEOUT
+fi