262 lines
7.8 KiB
C
262 lines
7.8 KiB
C
/* $NetBSD: cpu.h,v 1.56 2013/10/19 19:20:59 christos Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2002 The NetBSD Foundation, Inc. All rights reserved.
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)cpu.h 5.4 (Berkeley) 5/9/91
|
|
*/
|
|
|
|
/*
|
|
* SH3/SH4 support.
|
|
*
|
|
* T.Horiuchi Brains Corp. 5/22/98
|
|
*/
|
|
|
|
#ifndef _SH3_CPU_H_
|
|
#define _SH3_CPU_H_
|
|
|
|
#if defined(_KERNEL_OPT)
|
|
#include "opt_lockdebug.h"
|
|
#endif
|
|
|
|
#include <sh3/psl.h>
|
|
#include <sh3/frame.h>
|
|
|
|
#ifdef _KERNEL
|
|
#include <sys/cpu_data.h>
|
|
struct cpu_info {
|
|
struct cpu_data ci_data; /* MI per-cpu data */
|
|
cpuid_t ci_cpuid;
|
|
int ci_mtx_count;
|
|
int ci_mtx_oldspl;
|
|
int ci_want_resched;
|
|
int ci_idepth;
|
|
};
|
|
|
|
extern struct cpu_info cpu_info_store;
|
|
#define curcpu() (&cpu_info_store)
|
|
|
|
/*
|
|
* definitions of cpu-dependent requirements
|
|
* referenced in generic code
|
|
*/
|
|
#define cpu_number() 0
|
|
|
|
#define cpu_proc_fork(p1, p2) /* nothing */
|
|
|
|
/*
|
|
* Arguments to hardclock and gatherstats encapsulate the previous
|
|
* machine state in an opaque clockframe.
|
|
*/
|
|
struct clockframe {
|
|
int spc; /* program counter at time of interrupt */
|
|
int ssr; /* status register at time of interrupt */
|
|
int ssp; /* stack pointer at time of interrupt */
|
|
};
|
|
|
|
|
|
#define CLKF_USERMODE(cf) (!KERNELMODE((cf)->ssr))
|
|
#define CLKF_PC(cf) ((cf)->spc)
|
|
#define CLKF_INTR(cf) (curcpu()->ci_idepth > 0)
|
|
|
|
/*
|
|
* This is used during profiling to integrate system time. It can safely
|
|
* assume that the process is resident.
|
|
*/
|
|
#define LWP_PC(l) \
|
|
(((struct trapframe *)(l)->l_md.md_regs)->tf_spc)
|
|
|
|
/*
|
|
* Preempt the current process if in interrupt from user mode,
|
|
* or after the current trap/syscall if in system mode.
|
|
*/
|
|
#define cpu_need_resched(ci, flags) \
|
|
do { \
|
|
__USE(flags); \
|
|
ci->ci_want_resched = 1; \
|
|
if (curlwp != ci->ci_data.cpu_idlelwp) \
|
|
aston(curlwp); \
|
|
} while (/*CONSTCOND*/0)
|
|
|
|
/*
|
|
* Give a profiling tick to the current process when the user profiling
|
|
* buffer pages are invalid. On the MIPS, request an ast to send us
|
|
* through trap, marking the proc as needing a profiling tick.
|
|
*/
|
|
#define cpu_need_proftick(l) \
|
|
do { \
|
|
(l)->l_pflag |= LP_OWEUPC; \
|
|
aston(l); \
|
|
} while (/*CONSTCOND*/0)
|
|
|
|
/*
|
|
* Notify the current process (p) that it has a signal pending,
|
|
* process as soon as possible.
|
|
*/
|
|
#define cpu_signotify(l) aston(l)
|
|
|
|
#define aston(l) ((l)->l_md.md_astpending = 1)
|
|
|
|
/*
|
|
* We need a machine-independent name for this.
|
|
*/
|
|
#define DELAY(x) delay(x)
|
|
#endif /* _KERNEL */
|
|
|
|
/*
|
|
* Logical address space of SH3/SH4 CPU.
|
|
*/
|
|
#define SH3_PHYS_MASK 0x1fffffff
|
|
|
|
#define SH3_P0SEG_BASE 0x00000000 /* TLB mapped, also U0SEG */
|
|
#define SH3_P0SEG_END 0x7fffffff
|
|
#define SH3_P1SEG_BASE 0x80000000 /* pa == va */
|
|
#define SH3_P1SEG_END 0x9fffffff
|
|
#define SH3_P2SEG_BASE 0xa0000000 /* pa == va, non-cacheable */
|
|
#define SH3_P2SEG_END 0xbfffffff
|
|
#define SH3_P3SEG_BASE 0xc0000000 /* TLB mapped, kernel mode */
|
|
#define SH3_P3SEG_END 0xdfffffff
|
|
#define SH3_P4SEG_BASE 0xe0000000 /* peripheral space */
|
|
#define SH3_P4SEG_END 0xffffffff
|
|
|
|
#define SH3_P1SEG_TO_PHYS(x) ((uint32_t)(x) & SH3_PHYS_MASK)
|
|
#define SH3_P2SEG_TO_PHYS(x) ((uint32_t)(x) & SH3_PHYS_MASK)
|
|
#define SH3_PHYS_TO_P1SEG(x) ((uint32_t)(x) | SH3_P1SEG_BASE)
|
|
#define SH3_PHYS_TO_P2SEG(x) ((uint32_t)(x) | SH3_P2SEG_BASE)
|
|
#define SH3_P1SEG_TO_P2SEG(x) ((uint32_t)(x) | 0x20000000)
|
|
#define SH3_P2SEG_TO_P1SEG(x) ((uint32_t)(x) & ~0x20000000)
|
|
|
|
#ifndef __lint__
|
|
|
|
/*
|
|
* Switch from P1 (cached) to P2 (uncached). This used to be written
|
|
* using gcc's assigned goto extension, but gcc4 aggressive optimizations
|
|
* tend to optimize that away under certain circumstances.
|
|
*/
|
|
#define RUN_P2 \
|
|
do { \
|
|
register uint32_t r0 asm("r0"); \
|
|
uint32_t pc; \
|
|
__asm volatile( \
|
|
" mov.l 1f, %1 ;" \
|
|
" mova 2f, %0 ;" \
|
|
" or %0, %1 ;" \
|
|
" jmp @%1 ;" \
|
|
" nop ;" \
|
|
" .align 2 ;" \
|
|
"1: .long 0x20000000;" \
|
|
"2:;" \
|
|
: "=r"(r0), "=r"(pc)); \
|
|
} while (0)
|
|
|
|
/*
|
|
* Switch from P2 (uncached) back to P1 (cached). We need to be
|
|
* running on P2 to access cache control, memory-mapped cache and TLB
|
|
* arrays, etc. and after touching them at least 8 instructinos are
|
|
* necessary before jumping to P1, so provide that padding here.
|
|
*/
|
|
#define RUN_P1 \
|
|
do { \
|
|
register uint32_t r0 asm("r0"); \
|
|
uint32_t pc; \
|
|
__asm volatile( \
|
|
/*1*/ " mov.l 1f, %1 ;" \
|
|
/*2*/ " mova 2f, %0 ;" \
|
|
/*3*/ " nop ;" \
|
|
/*4*/ " and %0, %1 ;" \
|
|
/*5*/ " nop ;" \
|
|
/*6*/ " nop ;" \
|
|
/*7*/ " nop ;" \
|
|
/*8*/ " nop ;" \
|
|
" jmp @%1 ;" \
|
|
" nop ;" \
|
|
" .align 2 ;" \
|
|
"1: .long ~0x20000000;" \
|
|
"2:;" \
|
|
: "=r"(r0), "=r"(pc)); \
|
|
} while (0)
|
|
|
|
/*
|
|
* If RUN_P1 is the last thing we do in a function we can omit it, b/c
|
|
* we are going to return to a P1 caller anyway, but we still need to
|
|
* ensure there's at least 8 instructions before jump to P1.
|
|
*/
|
|
#define PAD_P1_SWITCH __asm volatile ("nop;nop;nop;nop;nop;nop;nop;nop;")
|
|
|
|
#else /* __lint__ */
|
|
#define RUN_P2 do {} while (/* CONSTCOND */ 0)
|
|
#define RUN_P1 do {} while (/* CONSTCOND */ 0)
|
|
#define PAD_P1_SWITCH do {} while (/* CONSTCOND */ 0)
|
|
#endif
|
|
|
|
#if defined(SH4)
|
|
/* SH4 Processor Version Register */
|
|
#define SH4_PVR_ADDR 0xff000030 /* P4 address */
|
|
#define SH4_PVR (*(volatile uint32_t *) SH4_PVR_ADDR)
|
|
#define SH4_PRR_ADDR 0xff000044 /* P4 address */
|
|
#define SH4_PRR (*(volatile uint32_t *) SH4_PRR_ADDR)
|
|
|
|
#define SH4_PVR_MASK 0xffffff00
|
|
#define SH4_PVR_SH7750 0x04020500 /* SH7750 */
|
|
#define SH4_PVR_SH7750S 0x04020600 /* SH7750S */
|
|
#define SH4_PVR_SH775xR 0x04050000 /* SH775xR */
|
|
#define SH4_PVR_SH7751 0x04110000 /* SH7751 */
|
|
|
|
#define SH4_PRR_MASK 0xfffffff0
|
|
#define SH4_PRR_7750R 0x00000100 /* SH7750R */
|
|
#define SH4_PRR_7751R 0x00000110 /* SH7751R */
|
|
#endif
|
|
|
|
/*
|
|
* pull in #defines for kinds of processors
|
|
*/
|
|
#include <machine/cputypes.h>
|
|
|
|
/*
|
|
* CTL_MACHDEP definitions.
|
|
*/
|
|
#define CPU_CONSDEV 1 /* dev_t: console terminal device */
|
|
#define CPU_LOADANDRESET 2 /* load kernel image and reset */
|
|
#define CPU_MAXID 3 /* number of valid machdep ids */
|
|
|
|
#ifdef _KERNEL
|
|
void sh_cpu_init(int, int);
|
|
void sh_startup(void);
|
|
void cpu_reset(void) __attribute__((__noreturn__)); /* soft reset */
|
|
void _cpu_spin(uint32_t); /* for delay loop. */
|
|
void delay(int);
|
|
struct pcb;
|
|
void savectx(struct pcb *);
|
|
void dumpsys(void);
|
|
#endif /* _KERNEL */
|
|
#endif /* !_SH3_CPU_H_ */
|