Removed AB926 platform

include/l4/platform/ab926/irq.h

@@ -1,27 +0,0 @@
-#ifndef __PLATFORM_IRQ_H__
-#define __PLATFORM_IRQ_H__
-
-#define IRQ_CHIPS_MAX				2
-#define IRQS_MAX				64
-
-/* IRQ indices. */
-#define IRQ_TIMER01			4
-#define IRQ_TIMER23			5
-#define IRQ_RTC				10
-#define IRQ_UART0			12
-#define IRQ_UART1			13
-#define IRQ_UART2			14
-#define IRQ_SIC				31
-
-/* Cascading definitions */
-
-#define PIC_IRQS_MAX			31 /* Total irqs on PIC */
-/* The local irq line of the dummy peripheral on this chip */
-#define LOCALIRQ_DUMMY			15
-/* The irq index offset of this chip, is the maximum of previous chip + 1 */
-#define SIRQ_CHIP_OFFSET		(PIC_IRQS_MAX + 1)
-/* The global irq number of dummy is the local irq line + it's chip offset */
-#define IRQ_DUMMY			(LOCALIRQ_DUMMY + SIRQ_CHIP_OFFSET)
-
-
-#endif /* __PLATFORM_IRQ_H__ */

include/l4/platform/ab926/offsets.h

@@ -1,60 +0,0 @@
-/*
- * Describes physical memory layout of pb926 platform.
- *
- * Copyright (C) 2007 Bahadir Balban
- */
-
-#ifndef __PLATFORM_PB926_OFFSETS_H__
-#define __PLATFORM_PB926_OFFSETS_H__
-
-/* Physical memory base */
-#define	PHYS_MEM_START			0x00000000 /* inclusive */
-#define	PHYS_MEM_END			0x08000000 /* 128 MB, exclusive */
-
-/*
- * These bases taken from where kernel is `physically' linked at,
- * also used to calculate virtual-to-physical translation offset.
- * See the linker script for their sources. PHYS_ADDR_BASE can't
- * use a linker variable because it's referred from assembler.
- */
-#define	PHYS_ADDR_BASE			0x100000
-
-/* Device memory base */
-#define	PB926_DEV_PHYS			0x10000000
-
-/* Device offsets in physical memory */
-#define	PB926_SYSTEM_REGISTERS		0x10000000 /* System registers */
-#define	PB926_SYSCTRL_BASE		0x101E0000 /* System controller */
-#define	PB926_WATCHDOG_BASE		0x101E1000 /* Watchdog */
-#define	PB926_TIMER01_BASE		0x101E2000 /* Timers 0 and 1 */
-#define	PB926_TIMER23_BASE		0x101E3000 /* Timers 2 and 3 */
-#define	PB926_RTC_BASE			0x101E8000 /* Real Time Clock */
-#define	PB926_VIC_BASE			0x10140000 /* Primary Vectored IC */
-#define	PB926_SIC_BASE			0x10003000 /* Secondary IC */
-#define	PB926_UART0_BASE		0x101F1000 /* Console port (UART0) */
-
-/*
- * Uart virtual address until a file-based console access
- * is available for userspace
- */
-#define	USERSPACE_UART_BASE		0x500000
-
-/*
- * Device offsets in virtual memory. They offset to some virtual
- * device base address. Each page on this virtual base is consecutively
- * allocated to devices. Nice and smooth.
- */
-#define PB926_TIMER01_VOFFSET			0x00000000
-#define PB926_UART0_VOFFSET			0x00001000
-#define	PB926_VIC_VOFFSET			0x00002000
-#define	PB926_SIC_VOFFSET			0x00003000
-#define PB926_SYSREGS_VOFFSET			0x00005000
-#define PB926_SYSCTRL_VOFFSET			0x00006000
-
-#define PB926_UART0_VBASE			(IO_AREA0_VADDR + PB926_UART0_VOFFSET)
-#define PB926_TIMER01_VBASE			(IO_AREA0_VADDR + PB926_TIMER01_VOFFSET)
-#define PB926_SYSCTRL_VBASE			(IO_AREA0_VADDR + PB926_SYSCTRL_VOFFSET)
-#define PB926_VIC_VBASE				(IO_AREA0_VADDR + PB926_VIC_VOFFSET)
-#define PB926_SIC_VBASE				(IO_AREA0_VADDR + PB926_SIC_VOFFSET)
-#endif /* __PLATFORM_PB926_OFFSETS_H__ */
-

include/l4/platform/ab926/platform.h

@@ -1,22 +0,0 @@
-#ifndef __PLATFORM_PB926_PLATFORM_H__
-#define __PLATFORM_PB926_PLATFORM_H__
-/*
- * Platform specific ties between drivers and generic APIs used by the kernel.
- * E.g. system timer and console.
- *
- * Copyright (C) Bahadir Balban 2007
- */
-
-#include INC_PLAT(offsets.h)
-#include INC_GLUE(memlayout.h)
-
-#define PLATFORM_CONSOLE_BASE			PB926_UART0_VBASE
-#define PLATFORM_TIMER_BASE			PB926_TIMER01_VBASE
-#define PLATFORM_SP810_BASE			PB926_SYSCTRL_VBASE
-#define PLATFORM_IRQCTRL_BASE			PB926_VIC_VBASE
-#define PLATFORM_SIRQCTRL_BASE			PB926_SIC_VBASE
-
-void platform_irq_enable(int irq);
-void platform_irq_disable(int irq);
-void timer_start(void);
-#endif /* __PLATFORM_PB926_PLATFORM_H__ */

include/l4/platform/ab926/printascii.h

@@ -1,15 +0,0 @@
-#ifndef __PLATFORM__PB926__PRINTASCII__H__
-#define __PLATFORM__PB926__PRINTASCII__H__
-
-#define	dprintk(str, val)		\
-{					\
-	printascii(str);		\
-	printascii("0x");		\
-	printhex8((val));		\
-	printascii("\n");		\
-}
-
-void printascii(char *str);
-void printhex8(unsigned int);
-
-#endif /* __PLATFORM__PB926__PRINTASCII__H__ */

include/l4/platform/ab926/uart.h

@@ -1,20 +0,0 @@
-/*
- * Platform specific ties to generic uart functions that putc expects.
- *
- * Copyright (C) 2007 Bahadir Balban
- *
- */
-
-#ifndef __PLATFORM_PB926_UART_H__
-#define __PLATFORM_PB926_UART_H__
-
-#include INC_PLAT(offsets.h)
-#include INC_GLUE(memlayout.h)
-
-#define PLATFORM_CONSOLE_BASE			PB926_UART0_VBASE
-#include <l4/drivers/uart/pl011/pl011_uart.h>
-
-void uart_init(void);
-void uart_putc(char c);
-
-#endif /* __PLATFORM_PB926_UART_H__ */