Finish removing rustled

src/getting-started/01.00.BUILD.md

@@ -136,7 +136,7 @@ executing the binary usually has the operating system start by executing the C r
 This in turn invokes the Rust runtime, as marked by the `start` language item,
 which in turn invokes the main function.
 
-Having enabled `no_std`, as we are targeting on a microcontroller,
+Having enabled `no_std`, as we are targeting a microcontroller,
 neither the crt0 nor the rust runtime are available,
 so even implementing `start` would not help us.
 We need to replace the operating system entry point.

src/getting-started/02.00.FLASH.md

@@ -2,7 +2,7 @@
 
 Flashing is the process of moving our program into the microcontroller's (persistent) memory. Once flashed, the microcontroller will execute the flashed program every time it is powered on.
 
-In this case, our `rustled` program will be the only program in the microcontroller memory. By this I mean that there's nothing else running on the microcontroller: no OS, no daemon, nothing. `rustled` has full control over the device. This is what is meant by *bare-metal* programming.
+In this case, our `microrust-start` program will be the only program in the microcontroller memory. By this I mean that there's nothing else running on the microcontroller: no OS, no daemon, nothing. `microrust-start` has full control over the device. This is what is meant by *bare-metal* programming.
 
 <dl>
   <dt>OS</dt>
@@ -71,8 +71,8 @@ available.
 I mentioned that OpenOCD provides a GDB server so let's connect to that right now:
 
 ``` console
-$ arm-none-eabi-gdb -q target/thumbv6m-none-eabi/debug/rustled
+$ arm-none-eabi-gdb -q target/thumbv6m-none-eabi/debug/microrust-start
-Reading symbols from target/thumbv6m-none-eabi/debug/rustled...done.
+Reading symbols from target/thumbv6m-none-eabi/debug/microrust-start...done.
 (gdb)
 ```
 
@@ -157,7 +157,7 @@ set print asm-demangle on
 # Load your program, breaks at entry
 load
 # (optional) Add breakpoint at function
-break rustled::main
+break main
 # Continue with execution
 continue
 ```

src/getting-started/03.00.DEBUG.md

@@ -28,14 +28,14 @@ At this time, we are not interested in that "pre-main" part so let's skip right
 the `main` function. We'll do that using a breakpoint:
 
 ```
-(gdb) break rustled::main
+(gdb) break main
 Breakpoint 1 at 0x8000218: file src/main.rs, line 8.
 
 (gdb) continue
 Continuing.
 Note: automatically using hardware breakpoints for read-only addresses.
 
-Breakpoint 1, rustled::main () at src/rustled/src/main.rs:13
+Breakpoint 1, main () at src/microrust-start/src/main.rs:13
 13          let x = 42;
 ```
 

src/getting-started/Cargo.toml

@@ -4,5 +4,5 @@ version = "0.2.0"
 
 [dependencies]
 panic-halt = "~0.2"
-microbit="~0.7"
+microbit="~0.8"
 cortex-m-rt="~0.6"

src/setup/VERIFY.md

@@ -18,7 +18,7 @@ Bus 002 Device 033: ID 0d28:0204 NXP ARM mbed
 ```
 
 In my case, the micro:bit got connected to the bus #2 and got enumerated as the device #33.
-This means the file `/dev/bus/usb/002/033` *is* the Fmicro:bit3.
+This means the file `/dev/bus/usb/002/033` is the micro:bit.
 Let's check its permissions:
 
 ``` shell