80 lines
2.1 KiB
INI
80 lines
2.1 KiB
INI
#
|
|
# Amontec JTAGkey
|
|
#
|
|
# http://www.amontec.com/jtagkey.shtml
|
|
#
|
|
|
|
telnet_port 4440
|
|
gdb_port 0
|
|
tcl_port 0
|
|
|
|
interface ft2232
|
|
ft2232_device_desc "Amontec JTAGkey"
|
|
ft2232_layout jtagkey
|
|
ft2232_vid_pid 0x0403 0xcff8
|
|
ft2232_serial T1RWU3KU
|
|
|
|
|
|
# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
|
|
adapter_khz 6000
|
|
|
|
#jtag_nsrst_delay 400
|
|
#jtag_ntrst_delay 400
|
|
|
|
# Texas Instruments OMAP 2420
|
|
# http://www.ti.com/omap
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME nfp3200
|
|
}
|
|
|
|
# NOTE: likes slowish clock on reset (1.5 MBit/s or less) or use RCLK
|
|
#reset_config trst_and_srst
|
|
reset_config none
|
|
|
|
|
|
# Subsidiary TAP: ARM7TDMIr4 plus imaging ... must add via ICEpick (addr 6).
|
|
#jtag newtap $_CHIPNAME iva -irlen 4 -disable
|
|
|
|
# Subsidiary TAP: C55x DSP ... must add via ICEpick (addr 2).
|
|
#jtag newtap $_CHIPNAME dsp -irlen 38 -disable
|
|
|
|
# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer
|
|
#if { [info exists ETB_TAPID ] } {
|
|
# set _ETB_TAPID $ETB_TAPID
|
|
#} else {
|
|
# set _ETB_TAPID 0x2b900f0f
|
|
#}
|
|
#jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETB_TAPID
|
|
|
|
# Subsidiary TAP: ARM1136jf-s with scan chains for ARM Debug, EmbeddedICE-RT, ETM.
|
|
if { [info exists CPU_TAPID ] } {
|
|
set _CPU_TAPID $CPU_TAPID
|
|
} else {
|
|
set _CPU_TAPID 0x07b37477
|
|
}
|
|
jtag newtap $_CHIPNAME arm -irlen 5 -expected-id $_CPU_TAPID
|
|
|
|
# Primary TAP: ICEpick-B (JTAG route controller) and boundary scan
|
|
#if { [info exists JRC_TAPID ] } {
|
|
# set _JRC_TAPID $JRC_TAPID
|
|
#} else {
|
|
# set _JRC_TAPID 0x01ce4801
|
|
#}
|
|
#jtag newtap $_CHIPNAME jrc -irlen 2 -expected-id $_JRC_TAPID
|
|
|
|
# GDB target: the ARM.
|
|
set _TARGETNAME $_CHIPNAME.arm
|
|
target create $_TARGETNAME arm11 -chain-position $_TARGETNAME
|
|
|
|
# scratch: framebuffer, may be initially unavailable in some chips
|
|
#$_TARGETNAME configure -work-area-phys 0x40210000
|
|
#$_TARGETNAME configure -work-area-size 0x00081000
|
|
#$_TARGETNAME configure -work-area-backup 0
|
|
|
|
# trace setup ... NOTE, "normal full" mode fudges the real ETMv3.1 mode
|
|
#etm config $_TARGETNAME 16 normal full etb
|
|
#etb config $_TARGETNAME $_CHIPNAME.etb
|